SPI-AK12076374-Rev-E.pdf
PDF 61 KB Posted
- Attached to
- Cylinder Assembly
- Solicitation number
- SPRDL126R0015
About this file
This is a DD Form 2169 Special Packaging Instruction document dated 9 December 2025 (Revision E) for a cylinder component identified as part number 6-372-002506 (CAGE 12361), National Stock Number 3040-01-2076374. The document specifies detailed preservation, cleaning, drying, packing, and marking requirements for this military item.
The preservation requirements mandate internal preservation using operational lubricant with cylinder rods fully retracted and excess thoroughly drained, applied only to bare, unplated, unpainted metallic surfaces. Cleaning and drying follow MIL-STD-2073-1 standards. Packing specifications include single wrap computed per MIL-STD-2073-1, secured with tape, using wrap material per MIL-PRF-121, Type I, size as required. The unit container serves as the shipping container with dimensions 92-1/4 x 8-3/4 x 6 inches (ASTM-D6880, ST 1). Additional preservation options include MIL-PRF-2104 and MIL-PRF-16173, Grade 4. Marking must comply with MIL-STD-129. The continuation sheet provides a detailed diagram showing the cylinder blocked and braced within the container, with blocking and bracing components (end blocks, side blocks, and top blocks) secured via nails or staples conforming to ASTM-F-1667 using commercial quality adhesive. Unit pack weight is 293.0 pounds with dimensions 095.2 x 010.5 x 010.2 inches, and pack cubic footage is 0005.900 cubic feet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126R0015.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2076374 9 DEC 2025
AK12076374
E
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
6-372-002506 (12361) CYLINDER 19207
A. QUALITY ASSURANCE PROVISIONS, PRESERVATION: INSPECT THE PRESERVATION, UNIT PACK, AND PACKING IN
ACCORDANCE WITH MIL-STD-2073-1.
B. PRESERVATIVE: PRESERVE INTERNALLY WITH OPERATIONAL LUBRICANT. CYLINDER RODS FULLY RETRACTED.
THOROUGHLY DRAIN EXCESS.
C. PRESERVATIVE: APPLY TO BARE, UNPLATED, UNPAINTED METALLIC SURFACES.
D. WRAP: SINGLE WRAP REQUIRED. COMPUTE SIZE IN ACCORDANCE WITH MIL-STD-2073-1. SECURE WRAP WITH
TAPE.
E. PACKING: THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
001 NONE 0293.0 0005.900
MIL-STD-2073-1, METHOD 20
MIL-STD-2073-1
MIL-STD-2073-1
10. UNIT PACK CU. (CU. FT.) 11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1, SEE NOTE E
NOT APPLICABLE
MIL-STD-129
095.2 010.5 010.2X X
b. LEVEL B
16. MARKING
a. LEVEL A
1B 2C 3D 4E
A/R A/R
PRESERVATIVE: MIL-PRF-2104.
PRESERVATIVE: MIL-PRF-16173, GR 4.
WRAP: MIL-PRF-121, TY I, SIZE A/R.
CONTAINER: ASTM-D6880, ST 1,
SIZE 92-1/4 X 8-3/4 X 6, SEE PAGE 2.
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2076374 9 DEC 2025
AK12076374
E
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
6-372-002506 (12361) CYLINDER 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
File details come from the government source that posted it. Updated .