SPECS-Heavy Duty Milling Machine.pdf
PDF 95 KB Posted
- Attached to
- Milling Machines - Mountain Home AFB Federal contract opportunity
- Solicitation number
- FA489724Q0011
About this file
This document is a Specification Sheet for a heavy duty milling machine required by the 366th Maintenance Squadron at Mountain Home AFB, ID. The government is seeking to procure two (2) heavy duty milling machines that meet minimum specifications, including a table size of 10" x 54", X/Y/Z axis travel capabilities, spindle RPM range, head tilt/swivel capabilities, and 3-phase power requirements. The contractor shall provide installation, onsite training, and one-year warranty on parts. The related federal contract opportunity is Solicitation FA489724Q0011 for Milling Machines at Mountain Home AFB, which is a Small Business Set-Aside Request for Quotation. Offers are due by 12:00 PM CST on 24 June 2024, with questions accepted until 10 June 2024.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPECS-Heavy Duty Milling Machine Final.docx | DOCX document | |
| Combined Synopsis and Solicitation - Milling Machines Final.pdf | ||
| SPECS-Heavy Duty Milling Machine Final.pdf | ||
| SPECS-Heavy Duty Milling Machine.pdf | ||
| QUESTIONS AND ANSWERS.pdf | ||
| SPECS-Heavy Duty Milling Machine.pdf | ||
| Combined Synopsis and Solicitation - Milling Machines.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION SHEET
Mountain Home AFB, ID
Heavy Duty Milling Machine
3 June 2024
1. GENERAL: The 366th Maintenance Squadron located on Mountain Home AFB, ID requires two (2) heavy duty milling machines to include installation and onsite training of Government personnel on all equipment.
2. HEAVY DUTY MILLING MACHINE MINIMUM SPECIFICATIONS: The heavy duty milling machines must (at a minimum) comply with the following salient characteristics:
2.1. Physical Characteristics
2.1.1. Vertical milling machine capable of removing large quantities of material while maintaining rigidity and repeatable accuracy in finished parts.
2.1.2. Table size of 10” X 54”
2.1.3. X axis table travel: 30.5”
2.1.4. Y axis table travel: 17.5”
2.1.5. Z axis (knee) travel: 15.05”
2.1.6. Ram travel / swivel: 18.5” / 360 degrees
2.1.7. Spindle quill travel: 5”
2.1.8. X, Y and Z-axis powerfeeds
2.1.9. Trip release quill feed rates: 0.00015”, 0.0003”, 0.0006”.
2.1.10. Twin Swivel R8 Spindle
2.1.11. 3HP Digital variable Spindle motor
2.1.12. Spindle Low Range: 60-500 RPM / High Range: 500-4500 RPM
2.1.13. Head tilt Front to Back: 45-0-38 degrees
2.1.14. Head Tilt Left to Right: 90-0-90 degrees
2.1.15. Head swivel: 360 degrees
2.1.16. Power requirements: 220 VAC, 15 Amps 3-phase.
2.1.17. Machine weight: 2750 Pounds Max.
2.1.18. Overall machine dimensions: 65” X 66” X 87”.
2.2. Warranty
2.2.1. Parts: 1 year
3. INSTALLATION: The Contractor shall provide all personnel, equipment, tools, materials, supervision, transportation, and other items needed to setup/install the requested milling machines.
3.1. The Contractor shall install all requested equipment in accordance with (IAW) manufacturer’s specifications.
3.2. The Contractor shall ensure proper operation of the installed of milling machines.
3.3. Any equipment not functioning properly IAW manufacture’s specifications shall be diagnosed and repaired by the Contractor.
3.4. The Contractor shall ensure cleanliness of Government facility is maintained at all times.
3.5. The Government will inspect facility for cleanliness prior to Contractor’s departure.
3.6. Any damage done to Government property by the Contractor shall be repaired by the Contractor at the Contractor’s expense.
4. TECHNICAL SUPPORT: Following completion of installation by purchaser, the Contractor shall provide technical support if there are any issues either by telephone or in person.
5. SPECIFICS:
3.1. Shipping must be included in the quotation.
3.1.1. Contractor shall deliver to metals tech facility – 865 Alpine St. Suite 117, Mountain Home AFB ID, 83648.
3.1.2. Delivery will be no later than 30 days after date of contract (ADC).
3.1.3. Contractor shall schedule delivery with the point of contract 48 hours prior to delivery.
File details come from the government source that posted it. Updated .