Specs for Purification Water Filtratration.pdf

3M™ Water Filtration Products

SPEC#

QUANTITY

application: ICE/COFFEE models: High Flow Series

ICE260-S/ICE265-S

PRODUCT BENEFITS

PRODUCT SPECIFICATIONS

3M Purification Inc. Water Filtration Products High Flow Series dual manifold High Flow Series ICE260-S and ICE265-S water filtration systems help provide consistent high qual-ity water for commercial ice machines and coffee brewers by reducing the effects of sediment, chlorine taste and odor and scale at flow rates up to 6.68 gpm (25.3 lpm).

Built-in scale inhibition reduces the ability of calcium and magnesium to precipitate as hard scale.

• Model: High Flow Series ICE260-S combines two High Flow Series HF60-S car-tridges with a High Flow Series 2XX twin manifold to give chlorine taste and odor reduction with cyst, bacteria1 and sediment reduction, while reducing the effects of chlorine corrosion and scale for up to 70,000 gallons (264,978 liters).

• Model: High Flow Series ICE265-S combines two High Flow Series HF65-S car-tridges with a High Flow Series 2XX twin manifold to give chlorine taste and odor reduction with sediment reduction for higher turbidity water, while reducing the effects of chlorine corrosion and scale for up to 70,000 gallons (264,978 liters).

• Effectively reduces sediment and chlorine taste and odor for better equipment protec-tion and clearer, great tasting ice.

• Revolutionary Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”) dual-zone media cartridge construction combines a membrane in series with pre-mium activated carbon to provide superior throughput and cartridge life.

• Built-in bacteria inhibitor intended to reduce fouling of media (HF60-S replacement cartridge.)

• Tested and verified by manufacturer’s laboratory to Standard 53 for cyst reduction (HF60-S replacement cartridge).

• NSF Standard 42 and/or FDA CFR-21 compliant materials.

• Reduction of up to 99.99% of common water-borne heterotrophic bacteria by mem-brane filtration as tested by 3M Purification (HF60-S replacement cartridge).

• Built-in scale inhibitor reduces lime scale build-up as tested by CUNO.

• 3/4” NPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.

• Auxiliary inlet gauge port allows optional monitoring of differential water pressure.

ENHANCED

Model Number

Part Number

Reduction Claims

Nominal Micron Rating

Capacity Service

Flow Rate Application

Replacement Cartridge

Sizing

ICE260-S 56245-03

Cyst, Bacteria1, Sediment, Chlorine Taste and Odor, Scale2

0.23 70,000 gallons (264,978 liters)

6.68 gpm (25.3 lpm)

Most Standard

Water

HF60-S: (Qty. 2) 56134-05

Flakers to 4,800 lbs. (2,177 kg)

ICE265-S 56245-04

Sediment, Chlorine

Taste and Odor, Scale2 3.03 70,000 gallons (264,978 liters)

6.68 gpm (25.3 lpm)

Higher Turbidity

Water

HF65-S: (Qty. 2) 56134-09

Flakers to 4,800 lbs. (2,177 kg) vie364 Highlight vie364 Highlight

3M Purification Inc. Water Filtration Products

PHYSICAL SPECIFICATIONS

LIMITED WARRANTY

• Auxilliary inlet gauge port allows optional monitoring of differential water pressure.

• Filter cartridges are o-ring seal type.

• System maximum operating pressure of 125 psi (862 kPa) and operating temperature of 100°F (37.8°C).

• Recommended service flow rate is up to 6.68 gpm (25.3 lpm).

• Filter cartridges incorporate a bacteriostatic carbon block filtration medium (HF60-S replacement cartridge) and scale inhibitor.

• System materials are NSF Standard 42 and/or FDA CFR-21 compliant.

• Cartridges are sanitary in design, requiring no contact with the filter media during cartridge change-out.

• Filter cartridges require no pre-activation.

• NSF Performance Data Sheet (PDS) is included.

• Shipping weight: Contact Factory.

• Operating weight: 27 lbs. (12.2 kg) per case.

These installation tips are for informational purposes only and are not intended to be used as actual installation instructions. CAUTION: To reduce the risk associated with property damage due to water leakage:

• Protect from freezing, remove filter cartridge when temperatures are expected to drop below 40°F (4.4°C).

• Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100°F (37.8°C).

• Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.

• The disposable filter cartridge MUST be replaced every 12 months, at the rated capacity or if a noticeable reduction in flow rate occurs.

3M Purification Inc. warrants this Product will be free from defects in material and manufacture for five (5) years from the date of purchase: The filter cartridge or filter membrane is warranted to be free from defects in material and manufacture for one (1) year. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purification Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any filter cartridge or membrane as it will vary with local water conditions and water consumption. 3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product fails to satisfy this Limited Warranty during the warranty period, 3M Purification Inc. will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M Purification Inc.’s exclusive obligation. For additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction Manual.

Limitation of Liability: 3M Purification Inc. will not be liable for any loss or damage arising from this 3M Purification Inc. product, whether direct, indirect, special, incidental, or c onsequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of inciden-tal or consequential damages, so the above limitation or exclusion may not apply to you.

WARNING: To reduce the risk associated with the ingestion of contaminants:

• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment

#070595-CT-001

Manufacturer recommends regularly scheduled maintenance and replacement of the filter cartridge(s) in order for the product to perform as advertised/sold. Manufacturer shall not be liable for system failures due to improper maintenance.

70-0201-9420-8

Please recycle. Printed in U.S.A.

IMPORTANT: INSTALLATION TIPSTO REMOVE CARTRIDGE

2 5/16" (5.9 cm) MIN

DISTANCE REQUIRED

18 1/16" (45.9 cm)

16 7/8" (42.9 cm)

3M Purification Inc.

Worldwide: 203.237.5541 Fax: 203.630.4530 www.3Mpurification.com

High Flow Series

ICE260-S/ICE265-S

SPEC#

QUANTITY

MODEL NUMBER

PART NUMBER

vie364 Highlight