The file's text, extracted by GovTribe without its formatting.
PRODUCT DESCRIPTION
Naval Special Warfare Group TWO (NSWG2) Logistics Supply Unit TWO (LOGSU-2) Suzuki Outboard Motors
1. BACKGROUND
1.1. LOGSU-2 Maritime procurement of Suzuki Outboard Motors Parts and Accessories to sustain and support 250HP engines presently in use and for any upgraded/replacement engines and parts.
2. OBJECTIVE
2.1. The objective of this requirement is to acquire Suzuki Outboard Motors parts and accessories to maintain LOGSUPPU-2 11MSC RHIB assets to support SEAL team training.
3. SCOPE
3.1. The repair parts will be used to sustain LOGSUPPU-2 11MSC through its service life as this is now a permanent asset of LOGSUPPU-2.
4. DESCRIPTION OF REQUIREMENT
4.1. Description and Capabilities:
4.1.1. The Suzuki engines and accessories are essential to meet Government requirements.
4.1.2. NSW requires the specific Suzuki engines and accessories for the highly specialized training conducted with the 11m SSC in multiple waterfront environments.
4.1.3. No other parts will satisfy requirements and provide the level of standardization required to maintain personnel safety and operational success.
4.1.4. The force equipment has been systematically maintained force wide since 2020 to ensure continuity and familiarization. The repairs are often conducted by operators who are not trained mechanics and as such consistency (such as part numbers as well as form, fit and function characteristics) is considered mission essential.
4.1.5. The OEM parts enable maintenance standardization, familiarization, and Supply Chain Management Safety and Operational success across NSW subordinate commands. It is essential and critical to NSW’s mission success to purchase only the items indicated for continued safety and operational success of NSW combat operations.
4.2. Specifications/Salient Characteristics:
4.2.1. Each craft has specific limitations on HP and engine weight. It is critical that Suzuki engine parts are used to avoid unknown reliability and or physical characteristic changes.
4.2.2. All parts and accessories must be system matched to the engines, including all wiring harnesses, stern & swivel, muffler, fuel demand valve, control panels, and all associated parts. Further, parts and accessories from other manufactures may void the warranty for engines in the NSW fleet.
4.2.3. The NSW waterborne craft presently use the Suzuki 250 HP.
5. DELIVERABLES
| Item(s) |
| Serial/Product No. |
| Quantity |
| SPARK PLUG (BKR6E) |
| 09482-00427 |
| 500 |
| Kit, Propeller Nut |
| 57630-93L00 |
| 50 |
| Cotter pin |
| 09204-03003 |
| 50 |
| Kit, Water Pump Repair |
| 17400-98J03 |
| 10 |
| Case, Water Pump |
| 17410-93J01 |
| 10 |
| Impeller, Water Pump |
| 17461-93J00 |
| 10 |
| FILTER ASSY, FUEL |
| 15412-93J10 |
| 25 |
| SEAL, FUEL FILTER NO.1 |
| 15415-93J10 |
| 25 |
| FILTER, FUEL |
| 15643-93J00 |
| 10 |
| FILTER, FUEL |
| 15440-93J00 |
| 10 |
| FILTER ASSY, OIL |
| 16510-96J10 |
| 50 |
| CHAIN,TIMING 2ND |
| 12762-93J00 |
| 25 |
| SENSOR ASSY,SHIFT POSITION |
| 13580-98J03 |
| 10 |
| SENSOR,OXYGEN |
| 18213-98J30 |
| 15 |
| SENSOR,PRESSURE |
| 18590-68H00 |
| 15 |
| COIL ASSY,IGNITION |
| 33410-93J00 |
| 25 |
| SENSOR ASSY,TRIM & TILT |
| 34840-98J03 |
| 10 |
| SENSOR ASSY,TRIM |
| 34840-98J11 |
| 10 |
| SWITCH ASSY,NEUTRAL |
| 37721-93J00 |
| 20 |
| Trim Assy, Power with Tilt |
| 48000-98J11 |
| 5 |
| Lower Unit (Black all models 2017-Current) |
| 50060-98827-YAY |
| 5 |
| Single Eng. Binnacle SPC 1.0 |
| 67200-98J06 |
| 2 |
| Dual Binnacle SPC 1.0 (Multi Remote Control) |
| 67200-98J14 |
| 2 |
| FUEL PUMP/FUEL VAPOR SEPARATOR |
| 15412-93J10-000 |
| 10 |
| SWITCH ASSY,PTT |
| 37850-92J00-000 |
| 10 |
| MOTOR ASSY,PTT |
| 38100-93J04-000 |
| 10 |
| RELAY ASSY,PTT |
| 38410-93J12-000 |
| 10 |
| Suzuki Water Grip Proppeller |
| 990C0-00810-185 |
| 10 |
| Suzuki Water Grip Proppeller |
| 990C0-0081L-185 |
| 10 |
| O RING (D:1.9,ID:21.8) |
| 09280-22019 |
| 100 |
| GASKET, CYL HEAD COVER PORT |
| 11189-93J00 |
| 5 |
| GASKET, CYL HEAD COVER STBD |
| 11179-93J00 |
| 5 |
| GASKET, OCV |
| 16555-93J01 |
| 5 |
| VALVE, PCV |
| 18118-93J00 |
| 10 |
| SEAL, PCV VALVE |
| 11198-58B00 |
| 10 |
| GASKET (9.516.52) |
| 09168-10034 |
| 20 |
| PLUG, DRAIN |
| 55128-93J10 |
| 20 |
| PLUG, DRAIN |
| 55128-93L00 |
| 20 |
| SUZUKI SUPER GREASE / DRIVE SHAFT |
| 99000-25480 |
| 20 |
| WATER RESISTANT GREASE / PROP NUT |
| 99000-25350 |
| 20 |
| SILICONE SEAL/LWR UNIT, Water Pump Mating Surface |
| 93691-80030 |
| 20 |
| BOND 1207B SEAL VALVE COVER GASKET |
| 990A0-06E70-03Z |
| 20 |
Item Subtotal
6. DELIVERY INFORMATION
6.1. Required delivery date: 17 JULY 2023
6.2. Delivery POC Name:
6.3. Delivery address:
ATTN:
1807 Cove Rd. Bldg. 3888 Virginia Beach, VA. 23459
6.4. Special instructions: N/A
7. SECURITY
7.1. N/A
8. SAFETY
8.1. N/A
9. GOVERNMENT FURNISHED PROPERTY/EQUIPMENT/INFORMATION (GFP/GFE/GFI)
9.1. N/A
10. QUALITY ASSURANCE
10.1. The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms to include proper delivery of quantity and type of goods. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.