Specifications Wildlife Panels 16 Foot.pdf
PDF 69 KB Posted
- Attached to
- Wildlife Panels, GFP Annual
- Solicitation number
- IFB 23IFB8519
- Issued by
- Brown County, South Dakota
About this file
This document contains the specifications for 16-foot wildlife panels to be manufactured and delivered under an annual contract with the State of South Dakota. The panels are to have dimensions of 194.5" long by 84.25" high, constructed of 14-gauge 1" square steel tubing with rounded top corners. The panels will have 1/2" diameter steel rod hinge pins, with the lower pins 5" long and the upper pins 5.75" long. The panels will include a standard galvanized cattle panel 16' x 50" x 4-gauge, either welded or held in place by L-channel. Vertical spacers will be included between the top three horizontal bars.
The related state and local contract opportunity is an annual contract for the manufacture and delivery of these wildlife panels to designated locations within the State of South Dakota. The contract term and any renewal options are not specified in the information provided.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Specifications Wildlife Panels 12 Foot.pdf | ||
| SDVendorManual_20211221.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Wildlife Panel 16 Foot Specifications:
• Dimensions, 194.5” long X 84.25” high.
• Steel tubing 1” square, thickness 14 gauge.
• Top corners of panel tubing are to be rounded.
• Hinge pins constructed from 1/2" diameter steel rod.
• The upper hinge pins are 5.75” long with 3.5” exposed below the strap and .25” above the strap for welding.
• The lower hinge pins are 5” long with 2.75” exposed below the strap .25” above the strap for welding.
• The bottom of the lower hinge pin strap is 18” above the bottom of the panel.
• The bottom of the upper hinge pin straps is 70.5” above the bottom of the panel.
• The bottom of the lower hinge loop is 15.75” above the bottom of the panel.
• The bottom of the upper hinge loop is 69” above the bottom of the panel.
• Hinges loops constructed from 2” X 1/8” steel strapping.
• Panel to be made up of 4 horizontal tubes; one 8” above the ground, one at 59” above the ground, one at 71” above the ground, one at the top of the panel.
• Standard galvanized cattle panel 16’ X 50” X 4 gauge, welded to gate every 16” with 2” welds all the way around the entire panel OR held in place by 1” lengths of L-channel every 16” all the way around the entire panel.
• Vertical spacers between the top 3 horizontal bars 65” (horizontal) inches from either side of the panel.
File details come from the government source that posted it. Updated .