Specifications Wildlife Panels 12 Foot.pdf
PDF 58 KB Posted
- Attached to
- Wildlife Panels, GFP Annual
- Solicitation number
- IFB 23IFB8519
- Issued by
- Brown County, South Dakota
About this file
This document contains the specifications for 12-foot wildlife panels requested in an annual contract issued by the State of South Dakota. The panels must be 12 feet long by 6 feet high, constructed with 14 or 16 gauge steel tubing that is either 1 inch or 1-1/4 inch round or square, and include leg loops and vertical bracing. The panels must be a minimum of 72 inches tall and a maximum of 10 inches from the bottom of the leg to the bottom of the bottom rail, with quick pin or "male-female" connections to accommodate uneven ground. The contract is for the manufacture and delivery of these wildlife panels to designated locations within the state on an annual basis.
The document does not provide details on pricing terms, set asides, incumbents, funding requirements, or other salient commercial information. It focuses solely on the technical specifications for the wildlife panels requested under this annual state contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Specifications Wildlife Panels 16 Foot.pdf | ||
| SDVendorManual_20211221.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Wildlife Panel 12 Foot Specifications:
• Dimensions, 12' long X 6' high.
• Steel tubing 1” or 1-1/4" round or square, thickness 14 or 16 gauge.
• Leg loops.
• Minimum 72 inches tall measured from bottom of leg to top of top rail.
• Maximum 10 inches measured from bottom of leg to bottom of bottom rail.
• Vertical bracing will be between rails if tubing is used, can be across rails if flat is used.
• Quick pin or "male-female" connections with large tolerances for setting up on uneven ground.
File details come from the government source that posted it. Updated .