Specifications-Tennessee_School_for_the_Blind_Bus.pdf

PDF 166 KB Posted

Attached to
School Bus for TN School for the Blind
Solicitation number
Event 32101-14050
Issued by
Davidson County, Tennessee

About this file

This specification document details the procurement requirements for one school bus on behalf of the Tennessee School for the Blind, issued by the State of Tennessee Department of General Services, Division of Vehicle and Asset Management. The requested vehicle is a 48-passenger school bus with convertible seating configurations (40, 35, or 30 passengers depending on wheelchair accommodation needs) that must comply with all state and federal school bus requirements. The bus must be a 2027 model or newer and include comprehensive specifications across vehicle construction, chassis, engine, interior design, safety equipment, electrical systems, and exterior features. No specific response deadline, delivery date, site visit requirements, bidder's conference, or award date is provided in this specification document.

The document does not specify pricing terms, set-asides, incumbent information, or funding amounts and sources. However, it establishes substantial performance and warranty requirements, including a minimum three-year or 50,000-mile bumper-to-bumper warranty on the bus and a five-year or 100,000-mile warranty on the engine with parts, labor, and two years of towing coverage for engine-related failures. The contractor must deliver the vehicle to 6500 Centennial Boulevard, Nashville, Tennessee 37209 during business hours (8:00 a.m. to 3:30 p.m. Central Time, Monday through Friday) and provide an owner's manual in digital format with delivery. Additionally, the contractor must maintain mobile service availability to respond to warranty issues within 24 hours of notice.

View the file

Other files

File Type Posted
School_Bus_for_TN_School_for_the_Blind.pdf PDF
32101-14050_TCs.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

School Bus Specifications

The State of Tennessee, Department of General Services (DGS) division of Vehicle and Asset Management (VAM) is seeking bids for the procurement of one (1) school bus on behalf of the Tennessee School for the Blind. The school bus must meet all state and federal school bus requirements.

Definitions

Vehicle Specifications

I. Standard features – The Contractor shall provide a vehicle with the following features:

1. Built on 48 (forty-eight) passenger shell with the following seating capacity:

a) Manufactured for 39+1 wheelchair=40 passengers plus driver

b) Ability to convert to both a 33+2w/c=35 passengers and to 27+3w/c=30 passengers after the removal of track mounted seats.

c) Included floorplan shows twenty-nine (29) inches of knee room at all seats spacing for 39+z w/c=40 pax vehicle and to show all track mounted seats with hidden wheelchair positions

d) Seating – quantity of eleven (11), thirty-nine (39) inch high back seats, all with three (3)-point seatbelts, and at least one (1) integrated child seat (ICS) included with every seat.

e) Seven (7) seats on drivers’ side, with five (5) standard mounted, and two (2) shall be track mounted over hidden wheelchair position for future use.

f) Six (6) seats on entrance door side with four (4) that shall be mounted standard over hidden wheelchair position for future use.

g) Seats with a minimum seat spacing of thirty-one (31) inches and a minimum knee spacing of twenty-nine (29) inches for every seat

h) Three (3) total wheelchair positions – one (1) left side rear covered with two track mounted seats, one (1) left side rear ready to go, and one (1) right side rear covered with track mounted seats.

2. 2027 model or newer

3. Dash mounted cruise control and high idle switch.

4. Driveline to have safety hangers around each shaft

5. Frame with eighty thousand (80,000) pounds psi

6. One (1)-piece hood with chrome trim

7. Standard instruments including:

a) Speedometer

b) Coolant temperature

c) Transmission

d) Oil temperature

e) Voltmeter

f) Fuel gauge

g) Oil pressure

h) Air pressure gauge

i) Tachometer

j) Abs

k) Hour meter

l) Trip odometer

m) Air filter restriction indicator

8. Steering to include tilt and telescope

9. Lift – Braun or equivalent product with one thousand (1,000) pound capacity wired to vehicle brake system to not work unless emergency brake has been engaged

10. Right rear mounted lift door with LED exterior light wired automatically to turn on

II. Chassis – The contractor shall ensure the chassis meets the following specifications:

1. Axle ratio to obtain seventy-five (75) miles per hour (mph) but governed at seventy (70) mph

2. Standard air cleaner as replaceable element

3. Front axle to have ten thousand (10,000) pounds with oil bath bearings to match suspension

4. Manufacturer standard support lift and lift door and geared to go seventy-five (75) mph

5. Stainless steel exhaust, exit left side through or under bumper

6. Front suspension rated ten thousand (10,000) pounds minimum and rear suspension to be twenty-three thousand (23,000) pounds minimum air ride suspension to accommodate flat floor items

III. Engine – The Contractor shall provide vehicles with the following engine specifications:

1. ISB Cummins or manufacturer standard In-line 6, 220 horsepower (HP) engine with rating of six hundred (600) pounds torque

2. Engine emissions to comply with federal engine emissions for current year

3. Standard engine brakes for size, including engine exhaust brakes

IV. Interior – The Contractor shall provide vehicles with the following interior specifications:

1. Electrically or pneumatically operated entrance door that is outward opening with three position switches mounted on the right side

2. Left side and right-side handrails/grabrails on the entrance door

3. Black rubber Koreseal brand flooring and five eighths inch (5/8) thick exterior grade plywood, or comparable

4. Flat floor design flooring

5. Metal aisle trim on floors

6. Seventy-seven (77) inches minimum of headroom

7. One and one-half (1 ½) inch thick fiberglass insulation for roof, front, and rear and diesel engine sound deadening package

8. Full length acoustic perforated ceiling

9. Six (6) inches by thirty (30) inches clear mirror with a rubber edge and a non-glare backup camera

10. Heated Roscoe or equivalent product cross view and review mirrors

11. Mirrors that are heated and remote controlled with dash power knobs, double seven by tens (7x10s)

12. Monitor with sixteen (16) lights that are visible from driver’s seat for exterior lights

13. Mounted momentary noise suppression switch on the dash

14. Passenger seats with gray fireblock upholstery, forty-two (42) ounce.

V. Seat Upholstery/Fabrics

Upholstery Locations Selected Upholstery

Student seats Seat color: dark grey fire block forty-two

(42) ounce

Driver’s seat headrest, cushion and back, and sideboxing

Air ride- high back with lumbar support, heated cushion on off switch and armrest

Driver’s seat back panel black

VI. Miscellaneous Interior – The Contractor shall provide vehicles with the following interior specifications:

1. Barriers shall both include five (5) pocket covers with Velcro pouch fasteners on the fire block upholstery

2. Dash mounted cup holder installed for driver convenience.

3. Driver’s glovebox with dash mounted map pocket

4. Dash including right side, driver’s cockpit, and wrap around console with cup holder

5. Radio equipped with AM/FM with PA speakers

6. Driver seats will include air ride with high back, lumbar support, heated cushions with on and off switches, and right and left arm rests

7. Driver seats with gray or black fabric and high back and tilt feature

8. Three (3)-point fluorescent orange adjustable driver seat belt

9. Interior side panels shall with aluminized steel side walls

10. Solenoid to disconnect all body circuits

11. Steering wheel with tilt and telescoping

12. Slanting stepwell with three step entrance including left and right handrails

13. Electric operated stop arm with LED strobe lights that includes a wind guard

14. Two vents for driver’s fresh air and static roof vent

VII. Safety Equipment – The Contractor shall provide the following safety equipment:

1. Back up camera wired to automatically come on when the transmission is put in reverse

2. Manufacturer standard rear backing horn alarm

3. Child reminder system that meets Tennessee State specifications and is wired to dome lights

4. Electrically or pneumatically operated crossing arm with keeper and override switch

5. Emergency exits shall include:

a) Two (2) push out windows, one (1) on the left and one (1) on the right side of the bus, each with buzzers

b) One (1) roof hatch with buzzers, Transpec or equivalent product

6. Reflective/Safety shall include:

a) 3M or Reflexite or equivalent product lettering of “SCHOOL BUS” on front and rear caps

b) 3M or Reflexite or equivalent product signage of two (2) inches yellow around exits, rear, and sides

c) Side that are attached with screws

7. Unit to include first aid kit, body fluid kit, 5 lb ABC dry-chemical extinguisher with a rating of 3-A/40-B:C , safety triangle, and seat belt cutter

8. Tie downs shall include:

a) Lap and shoulder belts installed at each wheelchair position

b) Three (3) Sure-Loc Titan model AL812S-4C-7 or equivalent products that are auto retracting with J hooks, auto shoulder, and lap belts

c) Three (3) tie downs for each wheelchair position that are a minimum of fifty-five (55) inches in length and each visible on the floor plan

d) Three (3) Sureloc or equivalent product tie down storage bags mounted on side wall at rear of bus

VIII. Paint and Lettering. – The Contractor shall ensure the paint and lettering meet the following specifications:

1. Six (6) inch tall black letters with both sides to read “TENNESSEE SCHOOL FOR THE BLIND” and six (6) inch numbers on sides front and rear

2. White painted roof

3. School bus yellow painted exterior

IX. Miscellaneous Exterior – The Contractor shall ensure the following exterior specifications are met:

1. Front bumper bolted to frame at three sixteenths (3/16) inch thick

2. Rear bumper at three-sixteenths inch (3/16) Concave design or comparable

3. Front and rear mounted towing hooks

4. Roof-mounted air horn above the driver’s window

5. Double bolted body mounts for maximum support

6. Fenders can be metal or rubber, but must be mounted at each rear wheel opening

7. Standard mud flaps on front and rear

X. Electrical and Miscellaneous Electrical Accessories

1. Three hundred twenty (320)-amp minimum Leece Neville alternator or equivalent product

2. Batteries with three (3) minimum three thousand (3,000) total CC amps

3. All wheel anti-lock with anti-slip braking system with self-diagnostic lights

4. Seven hundred fifty (750) watts minimum block heater with front bumper mounted receptable

5. Unit to have starting aid grid heater

6. Color and number coded wiring with the main harness protected by loom

7. Two (2) dual six (6) inch mounted defroster fans

8. Heaters- Ninety-one thousand (91,000) BTU front with removeable filter, eighty-four thousand (84,000) BTU right rear interior mounted

a) Thirty thousand (30,000) BTU stepwell mounted heater

b) Heater with ball type water valve cut off and dual heater cut off valves

c) Heater with metal-cast heavy duty heater booster pump for rear heater

XI. Warranty

1. Bus warranty at minimum of three (3) years or fifty thousand (50,000) mileage, bumper to bumper

2. Engine warranty at minimum of five (5) years or one hundred thousand (100,000) miles to include parts and labor and minimum two (2) years towing for engine related warranty failure.

3. Manufacturer standard transmission warranty.

XII. Brakes and Air System

1. Bosch hydraulic disc brake system or equivalent product

2. Largest available front and rear brake

3. Air compressor eighteen and seven tenths (18.7) cubic feet per minute minimum

4. Air tanks – two (2) tanks with one thousand seven hundred (1,700) cubic inch minimum total capacity with color coded air lines and petcock drain valves on wet tanks

5. Air lines with standard quick connect air fittings and side compartment door access for drains

6. Standard Air Dryer such as Bendix AD-IP with heater or comparable product

7. Standard size front and rear shocks

8. Air conditioning must include minimum one hundred twenty-six thousand (126,000) BTU

MCC brand or equivalent product

a) The air-conditioning system shall include front in-wall and rear-wall evaporators, skirt-mounted condensers, dual compressors, and a dash-mounted evaporator for the driver, configured as a true split-system design.

XIII. Fuel System

1. One hundred (100) gallon fuel tank with spring loaded locking door for both diesel and diesel exhaust fluid and access plate

2. Spin-on type fuel filter separator at the engine

XIV. Wheels, Wheel Accessories, and Tires

1. Six to sixteen (6-16) ply tires and 255/70r low profile radials

2. Balanced, Hankook or Michelin tires or equivalent product

3. Disc hub piloted wheels, twenty-two and a half by eight and twenty-five hundredths

(22.5 x 8.25) painted black

4. Wheelbase at two hundred-nineteen (219) or best fit for unit

XV. Transmission and Transmission Accessories

1. Manufacturer standard automatic transmission

XVI. Lighting

1. LED exterior lights and side mounted directional LEDs

2. LED headlights with lens heater, daytime running lights, and alternating flasher feature

3. LED hooded, strobing warning lights

4. LED clearance and cluster lights

5. Front and rear amber directional lights

6. Roof strobe light LED rear with brush guards

7. Two (2) full rows of LED dome lights

8. Two (2) LED lights exterior skirt mounted at rear wheels wired to reverse

9. Lights to include LED driver and stepwell LED light with separate switch

XVII. Windows

1. Double sliding driver window

2. Windows shall have black aluminum frames twelve-inch (12) sides and twenty eight percent (28) dark tint

3. One piece windshield with pivoting sun visor and shade bar at four (4) inches and include one (1) grip handle above windshield

4. Quantity of three (3) fifty (50)-inch L tracks mounted above windows to secure lap and shoulder belt for wheelchair occupants, with total tracking at one hundred fifty (150) inches.

XVIII. User Defined Specials

1. Luggage area shall include one (1) large luggage box of one-hundred-inch (100) wide with two (2) doors mounted curb side between wheel wells and door shocks and locks

2. Vehicle shall include a stop sign that is electric with LED strobe lighting

3. Wiring – Must be protected with ATO blade type fuses, have spare acc space for add-on equipment

a) Power plug in socket – direct current for accessories.

Delivery and Support

I. Delivery Location

4. The Contractor shall deliver the vehicles to 6500 Centennial Blvd. Nashville TN 37209 between the hours of 8:00 a.m. and 3:30 p.m. Central Time, Monday-Friday. Must include owner’s manual with delivery, digital format acceptable. State Holidays - About Tennessee - TN.gov

II. Contractor Support

1. The Contractor shall have a mobile service available to respond to warranty issues within twenty-four (24) hours of notice.

https://www.tn.gov/about-tn/state-holidays.html https://www.tn.gov/about-tn/state-holidays.html

File details come from the government source that posted it. Updated .