Specifications_Surface_Drive_Boat_Specs_021026.pdf
PDF 220 KB Posted
- Attached to
- REQUEST FOR A 20x54 SURFACE DRIVE BOAT, MOTOR, & Federal contract opportunity
- Solicitation number
- 140FS326Q0028
About this file
This document is a specifications sheet for a law enforcement patrol boat package required by the United States Department of the Interior, Fish and Wildlife Service (FWS) Refuges Law Enforcement Division, Zone Officer, located in Atlanta, Georgia. The specification details three primary components: a 20-foot aluminum patrol boat, a 50-horsepower outboard motor, and a single-axle aluminum trailer.
The boat must be constructed of 5086 marine-grade aluminum with a .125-inch aluminum hull plate, featuring a crimped hull bottom and sides with no welded seam at the chine. The hull dimensions are 20 feet long, 54 inches wide, 21-inch sides, 71-inch beam, and 20-inch transom. Internal structure includes 1-inch by 2-inch rectangular aluminum tubing for ribs and 2-inch by 2-inch square tubing for floor and side wall bracing. The motor specified is a 50-horsepower Pro Drive XRF50VAR EFI (or equivalent) keel cool marine long shaft model with remote steering, gear-driven lower unit, full power reverse, hydraulic power trim, and a Gen 5 lower unit with 1.5 to 1 gear reduction. The motor must be factory installed with all electrical wiring terminated, fused, wrapped, and connected, and the completed boat must be water tested before delivery. The trailer must be a Diamond City Angler 16-1750 PD (or equivalent) with aluminum construction, 3500-pound axle, LED lighting, 14-inch radial tires, and heavy-duty aluminum components. Additional hull features include a battery switch, motor battery tray, T-rail gunnel section, multi-position seat box, 14-gallon aluminum fuel tank, LED navigation and interior lights, 500-gallon-per-hour bilge pump, center console, and remote hydraulic steering system. State documentation and environmental fees are to be included if applicable.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140FS326Q0028_Amd_0001.pdf | ||
| Sol_140FS326Q0028.pdf | ||
| Sol_Clauses_Q2.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
United States Department of the Interior
FWS REFUGES LAW ENFORCEMENT DIV-ZONE OFCR
1875 CENTURY BOULEVARD, SUITE
420 ATLANTA GA 30345-331
Boat (Pro Drive TD Edition or equivalent)
• 20’ Long, 54” Wide, 21” Sides, 71” Beam, and 20” Transom
• Constructed of 5086 Marine Grade Aluminum
• .125 aluminum plate for hull construction
• Hull bottom and sides constructed (crimped) out of (1) plate forming hull (no welded seam at chine; Rake of hull to be welded at chine)
• 1” x 2” Rectangular aluminum tubing for ribs running the full length of the hull
• 2” x 2” Square aluminum tubing used for bracing the floor and side walls of hull (2” x 2” hull structure to also accommodate multi-position seat box).
• 2” x 6” aluminum channel on transom to accommodate motor mounting
• .100 aluminum plate sub floor mounted to ribs with aluminum rivets
Motor (Pro Drive XRF50VAR EFI or equivalent) Standard Motor Features
• 50hp Keel Cool Marine long shaft model
• Remote Steering motor
• Gear Driven Lower Unit
• Full Power Reverse (180 degree rotation of lower unit assembly)
• Instant Forward and Neutral
• Instant Prop Reverse Option
• Momentary Forward and Reverse Button
• Tach
• Hydraulic Power Trim
• Aluminum and Stainless Construction
• 1” Hex Propeller Shaft to accommodate 2-blade propeller recommended for loaded vessel
• Gen 5 Lower Unit 1.5 to 1 Gear Reduction
• Marine 50hp Outboard Powerhead.
Motor to be factory installed. All electrical wiring must be terminated, fused, wrapped, and connected. Hydraulic steering must be installed and tested. Competed boat must be water tested of all systems and accessories before delivery / pickup.
Trailer (Diamond City: Angler 16-1750 PD or equivalent) Standard Trailer Features
• Alum. Construction o 3500 lb axle
• The Shield Hubs
• 2” Ball Coupler
• LED Lighting (DOT Approved)
• Swivel Jack with Dolly Wheel
• Heavy Duty Aluminum Tongue
• 14” Radial Tires
• Spare Tire and Tire Carrier
• Premium Aluminum Wheels (Including Spare)
• Heavy Duty Bow Stop with Winch
• Stainless Steel Boat Buckle Ratchet Transom Tie Downs Trailer to be setup for even weight distribution and vessel fitment.
Additional Package Items Hull Features
• Battery Switch (Blue Sea Mini or equivalent)
• Motor Battery Tray
• T-Rail Gunnel Section to accommodate accessory mounting
• Multi-Position Seat Box
• Rear Driver’s Box
• 14 Gallon Alum. Tank
• Painted Hull (Dead Grass Brown)
• Trolling Motor Bracket
• LED Navigation Lights
• Heavy Duty Front Bumper Constructed of 3” aluminum pipe
• 4’ long Enclosed Front Deck with Hatch
• 20” long Extended Deck to cover 14 Gal Alum. Tank
• Sub floor with Non-Skid Paint
• Electrical Control Panel with USB Ports and 12 volt Accessory Plug
• Hull Layout for Rear Mounted Remote Steering
• Binnacle Throttle Assembly with integrated trim switch and Rev. Switch
• Marine Throttle Cable with Stainless Steel Hardware
Other Features
• 500 GPH Bilge Pump
• Center Console (Single Engine) with grab bar
• Spud Pole Kit
• Qt. 2 Pedestal Seat Bases (One on Driver Box and One on Multi Box)
• 120 Watt LED SpotLight
• Interior Lights White
• Rooster Tail Lights White
Motor Features
• Remote Steering Option with Hydraulic Steering (Single Engine; Teleflex Seastar HH5272-3 Helm and Teleflex Seastar HC5370-3 Cylinder or equivalent)
• Factory rigging
• Marine Battery and Battery Box
State Documenting and Environmental Fees (If Applicable)
File details come from the government source that posted it. Updated .