Specifications Hennepin Canal Tractor.docx
DOCX document 16 KB Posted
- Attached to
- DNR- Hennepin Canal 70 HP tractor
- Solicitation number
- 19-422DNR-LNDMG-B-5568
- Issued by
- Jo Daviess County, Illinois
About this file
This document outlines the specifications for a single tractor to be delivered to the Hennepin Canal Parkway in the State of Illinois. The tractor must meet minimum requirements of 70 PTO HP, a turbocharged diesel engine, 12 forward and 12 reverse transmission with a power reverser, front-wheel assist, hydraulic wet disc brakes, a minimum of three selective control valves, independent 540 RPM power take-off, a category 2 three-point hitch, and various other standard features. The tractor must be delivered with operator's manuals, a tool kit, and on-site training for IDNR staff.
The document does not provide any details on pricing, set-asides, incumbents, funding sources, or other contractual terms. The focus is solely on the technical specifications and delivery requirements for the tractor.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications Minimum 70 PTO HP, MFWD One Tractor delivered to Hennepin Canal Parkway Engine:
Minimum 70 PTO HP, Turbo Charged Diesel, Shall meet all current EPA requirements for exhaust.
Liquid Cooled Transmission:
12 Forward and 12 Reverse with a power reverser Front/Rear Axle:
Manufacturer’s standard front wheel assist with operator controlled or automatic operation selection Limited slip differential lock, engage on the go Steering and Brakes:
Power Steering Hydraulic Wet Disc Brakes Hydraulic:
Manufacturers standard hydraulic system with a minimum of three (3) selective rear control valves (SCV).
Controls for the SCV shall be located in the operator’s station.
Loader prep package – Dual mid valves with joystick control Power Take-Off Independent, 540 RPM. PTO shall be hydraulically or electro-hydraulic activated Hitch and Draw Bar:
Manufacturer’s standard category 2 3-point hitch shall be provided with rigid anti-sway braces or control block shims designed or reduce hitch sway Swinging drawbar
Instrumentation:
Key operated ignition Water and weatherproof starter switch with neutral start safety switch Throttle Tachometer Fuel Gauge Def Gauge Hour meter – Electric direct reading Engine – coolant gauge or warning light Air-filter restriction gauge or warning light Miscellaneous:
Cold start aid – grid heater or glow plugs Fuel tank – Diesel tank clearly labeled “Diesel fuel Only”; Def tank shall be clearly labeled as well Lockable tool box shall be provided and shall be secured to the tractor Slow moving vehicle emblem All exterior surfaces normally painter shall be painted manufacturer’s standard colors Four (4) 95 pound rear weights Operator’s Station Padded air suspension type operator’s seat with 3” seat belt Access from either side with all grab handles and steps Front and rear halogen lights Tires:
Front – (2) Agricultural Type, minimum 7.5-16 Rear – (2) Agricultural Type, minimum 12.4-24
Warranty:
Standard manufacturer warranty, 12 months minimum Parts and service must be readily available and located within the State of Illinois Standard tool kits shall be provided Any parts or tool kits shall be provided not specifically called for but required for proper operation shall be provided Two (2) copies of all operator manual, service manual , parts list and warranty information shall be provided with delivery.
Training:
IDNR staff shall have onsite training at the time of delivery. Staff shall be trained to drive and operate the tractor.
Loader:
General duty 70-75 inch bucket
File details come from the government source that posted it. Updated .