Specifications for Skid Steer Tractor~2.docx

SPECIFICATIONS FOR ONE (1) NEW CAT MODEL: 242D3 SKID STEER TRACTOR

**NOTE: If vendors choose to not comply with certain specifications listed. Those exceptions must be identified and documented on a separate sheet and uploaded as part of the vendors response.

Vendors are required to provide an authorized warranty and repair location within 100 miles of where the tractor will reside.

Proposals will not be considered if repair location is not within 100 miles.

Please list authorized dealer information: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

GENERAL: Equipment furnished under this specification shall be a 2024 Skid Steer Loader.

Specify Mfr. & Model _______________________________________________

TO COME WITH ALL STANDARD EQUIPMENT LISTED BELOW:

· POWERTRAIN: Cat C3.EB diesel engine – Gross horsepower per SAE J1349 – 74.3 hp (55.4 kW) @ 2400 RPM – Electric fuel priming pump – Glow plugs starting aid – Liquid cooled, direct injection – Air cleaner, dual element, radial seal -S-O-S sampling valve, hydraulic oil -Filter, cartridge type, hydraulic -Filters, canister type, fuel -and water separator -Radiator/hydraulic oil -cooler (side-by-side) -Spring applied, hydraulically released, -parking brakes -Hydrostatic transmission -Four wheel chain drive-

· HYDRAULICS: ISO or H pattern controls: -Electro/hydraulic implement control -Electro/hydraulic hydrostatic – transmission control

· ELECTRICAL: 12-volt electrical system -80 ampere alternator -Ignition key start/stop/aux switch – Lights: --Gauge backlighting – Two rear taillights – Dome light – Backup alarm -Electrical outlet, beacon –

· OPERATOR ENVIRONMENT: Operator warning system indicators: Air filter restriction –Alternator output –Armrest raised / operator out of seat –Engine coolant temperature –Engine oil pressure –Glow plug activation –Hydraulic filter restriction –Hydraulic oil temperature – Park brake engages –Engine emission system – Gauges: fuel level and hour meter – Storage compartment with netting -Ergonomic contoured armrest -Adjustable joystick controls -Control interlock system, when operator -Leaves seat or armrest raised: --Hydraulic system disables –Hydrostatic transmission disables –Parking brake engages -ROPS cab, open, tilt up -Anti-theft security system w/6-button -keypad -FOPS, Level 1 – Top and rear windows -Floormat -Interior rear view mirror -USB Charging port -Horn -Hand (dial) throttle, electronic

· FRAMES: Lift linkage, vertical path -Chassis, one piece welded -Machine tie down points (6) -Belly pan cleanout -Support, lift arm -Rear bumper, welded

· OTHER STANDARD EQUIPMENT: Engine enclosure – lockable -Extended life antifreeze (-37C, 34F) -Coupler, mechanical -Hydraulic oil level sight gauge -Radiator coolant level sight gauge -Radiator expansion bottle -Cat ToughGuard TM hose – Heavy duty flat faced quick disconnects with integrated pressure release -Split D-ring to route work tool hoses -along side of left lift arm -Hydraulic demand cooling fan -Per SAE J818-2007 and EN 474-3:2006 and -ISO 14397-1:2007

MACHINE SPECIFICATIONS

· 242D3 SSL DCA3A

· LANE 1 – AVAILABLE FROM SANFORD PDC

INCLUDES:

· 512-4242 242D3 SKID STEER LOADER

· 588-9076 CANOPY PACKAGE, PRO PLUS

· 512-4324 HYDRAULICS PERFORMANCE (H2)

· 512-4115 CONTROL, ISO, PROP, WT

· 512-4058 POWERTRAIN, TWO SPEED

· 495-1671 LIGHTS, LED

· 512-4343 ROPS, OPEN (C1)

· 416-9265 DISPLAY, ADVANCED, LCD, CAMERA

· 486-6956 FAN, COOLING, DEMAND

· 388-8298 QUICK COUPLER, MANUAL

· 536-9739 SEAT, AIR SUSPENSION, VINYL, HEAT

· 568-4700 FILM, TWO SPEED

· 568-4637 RIDE CONTROL, NONE

· 560-7824 BATTERY, HD, DISCONNECT, 850 CCA

· 356-6082 REAR LIGHTS

· 542-6994 SEAT BELT, 2”

· 566-7115 PRODUCT LINK, CELLULAR PL243

· 563-1163 CERTIFICATION ARR, P65

· BUCKET-GP, 68”, BOCE

· CARRIAGE, 46”, FORKS, 48” SSL

· COMBINED REPAIR TIMES TEST, PDI, PROD LINK

WARRANTY AND COVERAGE:

Standard Warranty: 24 month/2000 hours

Vendor Complies _____ Yes ______ No