Specifications for repair of HVAC dust suppression~2.docx
DOCX document 15 KB Posted
- Attached to
- AML Repair of Dust Suppression
- Solicitation number
- 23-422DNR-DIREC-B-36804
- Issued by
- Franklin County, Illinois
About this file
The document provided contains the specifications for the repair of an existing AAF International 131870-3 dust collector at the Southern IL Regional Office in Benton, Illinois, which is being procured by the Illinois Department of Natural Resources. The scope of work includes sealing all leaks in the water tank, replacing corroded bolts with stainless steel, replacing hoses and clamps, adding a water faucet, replacing the drain pipe, inspecting and repairing the fan and electrical components, inspecting and greasing/replacing the fan and motor bearings, and replacing the incoming spiral ductwork.
The contract is for the AML Repair of Dust Suppression, which is a state and local contract opportunity in Illinois, specifically in Franklin County. The document does not provide details on pricing terms, set asides, incumbents, funding requirements and sources, or any other salient information beyond the technical specifications for the repair work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Standard Terms and Conditions v23.1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for RotoClone repair
· This bid is for a repair of an existing AAF international 131870-3 dust collector that is a 2 1/2 NR/C type N model #8 Roto-Clone
· All leaks in the water tank will need to be sealed
· New steel panels will need to be welded in place to seal any leaks that can not be sealed by a weld bead
· A new metal panel needs to be welded into the bottom of the tank to expedite the sealing of all the leaks on the bottom and provide structural support for the water in the tank
· A new gasket/seal will need to be placed around the baffle inspection panel to stop the leaks in the current seal
· All corroded bolts will need to be replaced with stainless steel bolts
· The 2-inch wire hoses and clamps will need to be replaced with material resistant to corrosion
· A garden hose faucet will need to be added to the existing incoming water line near the Roto-clone to aid in cleaning of the roto-clone water tank
· The 2-inch drainpipe will need to be replaced and rewelded to the water tank
· The existing ball valve can be reused if it is cleaned and is determined to be in good condition
· After all leaks are repaired the tank interior and all wetted components that are not replaced with stainless steel will need to be recoated with a corrosion prevention coating
· The fan and electrical components need to be inspected and repaired if a fault is detected
· The fan and motor bearings need to be inspected/greased and replaced if an issue is discovered
· The incoming spiral ductwork will need to be replaced with spiral/stainless steel to remove the corrosion on the joining sleeve
File details come from the government source that posted it. Updated .