Specifications for Heavy Duty Tracked Excavator.docx

SPECIFICATIONS FOR 2024 LINKBELT 210X4 HEAVY DUTY TRACKED EXCAVATOR

NOTE: Vendors that cannot comply with specifications are to be detailed on separate attachments.

BASE MODEL: 2024 LINKBELT 210X4 HEAVY DUTY TRACKED EXCAVATOR

Unless otherwise specified in this Invitation to Bid (ITB), reference to a specific manufacturer or a specific product or model in the bid specifications does not restrict bidders to that manufacturer, product or model. This method is used to indicate the functional requirements (e.g., type, design, characteristics, quality) of the article desired. Bids may be considered on other manufacturers’ products or other models determined by the Purchasing Division to be the functional equivalent of the product or model referenced.

Equipment furnished under this specification shall be the manufacturer's current year conventional design for the type and the allied equipment specified. All necessary accessories customarily furnished whether stipulated herein or not, with such modifications and attachments as may be necessary to enable the vehicle to function reliably and efficiently in sustained operation.

HEAVY DUTY EXCAVATOR WITH BUCKET: COMPLIES ___YES NO___

· 9’ 8” HEAVY DUTY ARM, 18’ 8” HEAVY DUTY BOOM

· 27.5” 2-BAR GROUSER SHOES

· COMBINATION MULTIFUNCTION AUXILIARY HYDRAULIC WITH QUICK COUPLERS

· CAB HEAD GUARD

· CAB FRONT GUARD (BAR STYLE)

· REMOTE CARE

· STRICKLAND HYDRAULIC QUICK COUPLER

· STRICKLAND PRO-LINK HYDRAULIC THUMB

· STRICKLAND 48” BUCKET

ENGINE: COMPLIES ___YES NO___

· ISUZU AR-4HK1X FINAL TIER 4 TURBOCHARGED DIESEL ENGINE WITH ELECTRONIC CONTROL (ECM) AND HIGH PRESSURE COMMON-RAIL FUEL INJECTION, 4-CYLINDER, WATER-COOLED, COOLED EXHAUST GAS RECIRCULATION (CEGR), INTERCOOLER, VARIABLE-GEOMETRY TURBOCHARGER (VGT), DIESEL OXIDATION CATALYST (DOC) AND SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM WITH DOSING CONTROL MODULE AND HEATED DEF LINES AND TANK. ELECTRONIC FUEL PUMP AND PRIMING, FUEL COOLER, AUTO-IDLE START, AUTO WARM-UP, EPF ENGINE PROTECTION, DUAL-STAGE FUEL FILTRATION, REMOTE OIL FILTER, ENGINE OIL SAMPLE PORT, GREEN PLUG OIL DRAIN, DOUBLE ELEMENT AIR FILTER.

· SAE J 1349 NET HORSEPOWER – 160 HP (119.3 KW) @ 1800 RPM

· DISPLACEMENT – 317 CU IN (5.2L)

· MAXIMUM TORQUE – 457 LBF-FT (620 NM) @1,600 RPM

· STARTER – 24V-5.0KW

· ALTERNATOR – 85 AMP

· BATTERY – (2) 12-VOLT 92 AMP HOURS

CAB AND CONTROLS: COMPLIES ___YES NO___

· ROPS AND FOPS LEVEL 1 CERTIFIED WITH AUTOMATIC CLIMATE CONTROL A/C AND HEAT WITH DEFROSTER, 7” LCD HI-DEFINITION COLOR MONITOR WITH FULL TIME REAR VIEW CAMERA DISPLAY, FUEL EFFICIENCY GAUGE, LOW-EFFORT JOYSTICKS, DUAL HALOGEN CAB LIGHTS, CONTROL PATTERN CHANGER, SAFETY GLASS WINDOWS, SUNROOF WITH SUNSHADE, SHOCKLESS CAB SUSPENSION WITH FOUR FLUID CAB MOUNTS, SCM HIGH-BACK RECLINING, TILTING, AIR-SUSPENSION SEAT WITH HEAT, SLIDING 4-POSITION TILTING CONTROL CONSOLES, BLUETOOTH TECHNOLOGY, AM/FM SOUND SYTSEM WITH USB AND MP3 AUXILIARY INPUT JACK, DIGITAL CLOCK, DOME LIGHT, SEAT BELT, COAT HOOK, CUP HOLDER, STORAGE COMPARTMENTS, FLOOR MAT, FOOTRESTS, ASHTRAY, 24V CIGARETTE LIGHTER, 12V OUTLET, TRAVEL ALARM, HANDRAILS, MIRRORS, SIDE-ENTRY CAB FILLER, SPARE PARTS KIT.

· THREE SELECTABLE WORK MODES, REMOTECARE TELEMATICS GPS SYSTEM, ANTI-THEFT PASSWORD PROTECTION SYSTEM, ONBOARD SELF-DIAGNOSTIC SYSTEM WITH MEMORY AND SERVICE INTERVAL REMINDERS, AUTO IDLING SYSTEM, ONE-TOUCH DECELERATOR, AUTO-IDLE ENGINE SHUTDOWN, AUTO-POWER BOOST, NEUTRAL SAFETY START, GATE-LOCK SAFETY SHUTOFF.

HYDRAULIC SYSTEM: COMPLIES ___YES NO___

· OPEN-CENTER SYSTEM, TWO VARIABLE-DISPLACEMENT ELECTRONICALLY CONTROLLED AXIAL-PISTON PUMPS AND ONE GEAR PUMP FOR PILOT CONTROLS, MAIN CONTROL VALVE WITH ONE 4-SPOOL SECTION AND ONE 5-SPOOL SECTION WITH AUXILIARY SPOOL: STACKABLE, ONE GEAR PUMP FOR ROTATE, ONE SPOOL VALVE FOR ROTATE, AUXILIARY CONTROL SYSTEM, OIL COOLER, AUTO-POWER BOOST, ANTI-DRIFT VALVES, 6 MICRON RETURN FILTER, FIREWALL, HYDRAULIC OIL SAMPLE PORT. COMBINATION MULITFUNCTION HYDRAULICS W/PROPORTIONAL CONTROLS AND IN-CAB PRESSURE SETTING CONTROL.

· HYDRAULIC PUMPS

· PUMP OUTPUT – 2 X 55.7 GPM (211 L/MIN)

· PILOT PUMP MAXIMUM FLOW – 4.8 GPM (18 L/MIN)

· ROTATE PUMP (GEAR) MAXIMUM FLOW – 15.8 GPM (559.9 L/MIN)

· RELIEF VALVE SETTINGS

· BOOM/ARM/BUCKET – 4,970 PSI (34.3 MPa)

· in POWER BOOST – 5,410 PSI (37.3 MPa)

· SWING CIRCUIT – 4,260 PSI (29.4 MPa)

· TRAVEL CIRCUIT – 4,970 PSI (34.3 MPa)

· HYDRAULIC CYLINDERS

· BOOM: 2 – 4.7” x 3.3” x 49.4”

· ARM: 1 – 5.5” X 3.9” X 57.5”

· BUCKET: 47” X 3.3” X 39.8”

SWING: COMPLIES ___YES NO___

· PLANETARY REDUCTION POWERED BY AXIAL-PISTON MOTOR, INTERNAL RING GEAR WITH GREASE CAVITY FOR SWING PINION, SWING BEARING IS SINGLE-ROW, SHEAR TYPE BALL BEARING, MECHANICAL DISC SWING BRAKE, AUTO-POWER SWING.

· SWING SPEED: 11.5 RPM

· TAIL SWING: 10’4”

· SWING TORQUE: 47,200 LBF-FT

UNDERCARRIAGE: COMPLIES ___YES NO___

· X PATTERN CARBODY WITH 15’ 3” (4.65 M) UNDERCARRIAGE BY 9’ 2” (2.80 M) TRACK GAUGE, SEALED AND STRUTTED TRACK CHAIN WITH TRACK GUIDE, SEALED ROLLERS AND IDLES, TWO-SPEED INDEPENDENT HYDROSTATIC TRAVEL WITH COMPACT PLANETARY FINAL DRIVE, DISC TYPE BRAKES, ADJUSTABLE TRACK TENSION, CARBODY BELLY PAN, FULL-LENGTH TRACK GUARDS.

· CARRIER ROLLERS: 2 PER SIDE

· TRACK ROLLERS: 9 PER SIDE

· TRACK LINK PITCH: 7.5”

· SHOES: 51 PER SIDE

· SHOE WIDTH: 27.5”

· GROUND PRESSURE: 6.38 PSI

TRAVEL SYSTEM: COMPLIES ___YES NO___

· TWO-SPEED INDEPENDENT HYDROSTATIC TRAVEL WITH COMPACT AXIAL-PISTON MOTORS, HYDRAULIC MOTOR POWERED OUTPUT SHAFT COUPLED TO A PLANETARY REDUCTION DRIVE AND TRACK SPROCKET, ALL HYDRAULIC COMPONENTS MOUNTED WITHIN THE WIDTH OF SIDE FRAME, AUTOMATIC DOWNSHIFT FOR HIGH TORQUE TO OVERCOME OBSTACLES, SPRING-APPLIED HYDRAULIC RELEASE PARKING BRAKE BUILT INTO EACH MOTOR, TRAVEL MOTORS EQUIPPED WITH COUNTERBALANCE VALVE TO PREVENT OVER-SPEEDING DOWN AN INCLINE, SINGLE-PEDAL STRAIGHT LINE TRAVEL.

· TRAVEL SPEEDS: 2.0 – 3.1 MPH

· DRAWBAR PULL: 45,200 LBF

· GRADEABILITY: 70%

ATTACHMENT: COMPLIES ___YES NO___

· BOOM: 18’ 8”

· ARM: 9’ 8”

LUBRICANT AND COOLANT CAPACITY: COMPLIES ___YES NO___

· FUEL TANK: 108 GALLONS

· HYDRAULIC SYSTEM: 66 GALLONS

· HYDRAULIC TANK: 39 GALLONS

· FINAL DRIVE (PER SIDE): 1.3 GALLONS

· SWING DRIVE: 1.3 GALLONS

· ENGINE OIL: 6.1 GALLONS

· DEF TANK: 31.7 GALLONS

· COOLANT SYSTEM: 8.3 GALLONS

OPERATING WEIGHT: COMPLIES ___YES NO___

· WORKING WEIGHT WITH 166 LB. (75KG) OPERATOR, 27.5” (700 MM) 2-BAR SHOES, 18’ 8” (5.70M) BOOM, 9’ 8” (2.94M) ARM, 8,640LB. (3 920KG) COUTERWEIGHT AND 1,450 LB. (658 KG) BUCKET – 56,900 LBS (25 800 KG)

WARRANTY: COMPLIES ___YES NO___

· 5 YEARS OR 5000 HOURS