Specifications for 80K GVW Tractor with Day Cab~1.docx

SPECIFICATIONS FOR 80,000 GVW TRACTOR DAY CAB

NOTE: Vendors that cannot comply with specifications are to be detailed on separate attachments.

BASE MODEL: MODEL 579

Vehicles furnished under this specification shall be the manufacturer's current year conventional design for the type and the allied equipment specified. All necessary accessories customarily furnished whether stipulated herein or not, with such modifications and attachments as may be necessary to enable the vehicle to function reliably and efficiently in sustained operation. Further, all vehicles furnished under this specification shall comply with the most current Nevada Revised Statutes, Federal Motor Vehicle Safety Standards, Federal Environmental Protection Agency Emission Control Standards for new motor vehicles (currently vehicles certified prior to the current year requirements shall not be considered).

Specify Make & Model ____________________________

Specify Road Speed __________MPH @ ______________RPM

Vehicle bid must include a certification plate stamped at a minimum of 80,000 GVW. Vehicle bid shall meet or exceed this rating in all component parts.

State G.V.W. Rating_________________________

FRAME AND EQUIPMENT: COMPLIES ___YES NO___

· 10-5/8” Steel Rails to 285”

10.625 x 3.45 x .313 Dimension, 1,776,000 RBM; Yield Strength: 120,000 PSI. Section Modulus: 14.8 cubic inches. Weight: 1.44 lbs/inch pair

· Aluminum Frame Rail Crossmembers --- Excludes suspension

· EOF Tractor Tapered with Crossmember --- Includes Kingpin Cutout

· Peterbilt Rear Mudflaps and Straight Hangers

· Polyarmor Black Quarter Fenders with Peterbilt Heavy duty black 24” x 24” Polyarmor Quarter Fender made with polymer material that is chip, dent and scuff resistant.

· Holland FW35 Fifth Wheel Top Plate

· Rear or Fixed Settling AHD C/L Bogle 006

· LH Fifth Wheel Release

· 7.6in – 8 in. Fifth Wheel Height

· Holland Lightweight Air Slide

· 24” Air Slide

· Fifth Wheel Slide Controls

FRONT AXLE AND EQUIPMENT: COMPLIES ___YES NO___

· Meritor MFS+12E 12,500lb, 3.5 in. Drop Axle is designed for applications with a gross axle weight rating (GAWR) of 13,000 pounds. Axles include special low-friction bushings, double draw keys and integral thrust bearing and seal design for durability, low maintenance and ease of service.

· Taper Leaf Springs, Shocks 12,000 lbs

· Power Steering Sheppard HD94

· Power Steering Reservoir Frame Mounted w/Cooler

· PHP10 Aluminum PreSet PLUS Hubs Air Disc

· Greaseable Front Spring Pins

· Bendix Air Disc Front Brakes

· Tenneco Shocks for Steer Axle

· Meritor Wide Track IPO Standard, Front Axle

· 30mm Front Spring Spacer Blocks

REAR AXLE AND EQUIPMENT: COMPLIES ___YES NO___

· PACCAR DX-40 40K Tandem Axle

· PHP10 Aluminum Preset PLUS Hubs – Air Disc

· Bendix ESP Electronic Stability Program with ATC

· Diff Lock, Forward-Rear Axle

· Bendix Advanced/Fusion

· Anti-Lock Braking System (ABS) 6S6M --- Includes Air Braking System

· Synthetic Axle Lubricant All Axles

· Air Disc Rear Brakes, Tandem Drive Axle --- Includes Automatic Slack Adjusters

· Ratio 3.42 Rear Axle

· Low Air Leaf 40,000lb, 52 in Axle Spacing, Light Weight

· Dash Mtd Dump Switch with Indicator Light for Suspension

ENGINE AND EQUIPMENT: COMPLIES ___YES NO___

· PACCAR MX-13 455@1600 GV@2200 1650@800 (2021 Emissions)

· VMUX Electronics Architecture

· Engine Idle Shutdown Timer Enabled

· Enabled EIST Ambient Temp Overrule

· Eff EIST NA Expiration Miles

· Effective VSL Setting 65.0 MPH or Greater (USA)

· Typical Operating Speed 68MPH

· MX Retarder State Cruise Control On (Manual Mode Engine Parameter)

· Powertrain Optimized for Balance

· Decline Driver Performance Assist

· Engine Monitoring Protection – Derate

· CARB Engine Idling Compliance PACCAR PX-7, PX-9 and MX, Cummins X15 and ISX diesel engines will include the required factory installed serialized sticker on the drivers door to identify them as meeting the NOx idling standard.

· Engine Brake Controls Located on RH Column

· CARB Compliant Engine

· PACCAR 160 AMP Alternator, Brushed

· Immersion Type Block Heater 110-120V

· PACCAR Premium Starter – MX Engines Only

· 4 PACCAR Premium 12V Dual Purpose Batt 2920 CCA Threaded stud type terminal. Stranded copper battery cables are double aught (00) or larger to reduce resistance.

· Kissling Battery Disconnect Switch --- Terminals mounted inside battery box

· Low Voltage Disconnect System

· Crank Mounted Variable Speed Fan Clutch MX-13 Eng

· WABCO 25.9 CFM Air Compressor, MX only

· Compression Brake, MX

· PACCAR Fuel/Water Separator on Engine

· High Efficiency Cooling System Radiator Size by Model

· (1) Air Cleaner Engine Mounted

· Exhaust Single RH Horizontal --- DPF/SCR RH under cab

TRANSMISSION AND EQUIPMENT: COMPLIES ___YES NO___

· Eaton FAO16810C-EA3 10-Speed, Advantage Series Automated, no cooler. Forward ratios: 1st-12.80, 2nd-9.25, 9th-1.00, 10th-0.73. Reverse ratios: Low-13.63, High-2.78

· RPL20 Driveline Interaxle Requires RPL20 Driveline interaxle (option 4210870) for tandem rear axles.

· RPL25 SD Driveline, Without Midship Bearing

· Column Mounted Shifter RH Side

· Neutral Coast Mode – Automated transmission

AIR AND TRAILER EQUIPMENT: COMPLIES ___YES NO___

· Bendix AD-HF Air Dryer, Heater

· Mount Air Dryer Inside Rail LH

· Pull Cords All Air Tanks

· Nylon Chassis Hose

· Steel Painted Air Tanks

· Self-Returning Brake Hand Valve

· Chroming of Hose Tenna

· 15’ AE Lines Coiled, (2) 7-Way Plugs BOE socket

· AE Connections BOC/BOS Hose Tenna

TIRES AND WHEELS: COMPLIES ___YES NO___

· FF: CN 16ply 275/80R22.5 HSR2 Efficiency Rating: Optimal Regional hauling and on/off road, all-position. For car carrier application. Diameter = 40.0 inches; SLR=18.4 inches

· RR: CN 16ply 275/80R22.5 HSR2 Efficiency Rating: Optimal For car carrier application.

Diameter = 40.0 inches; SLR = 18.4 inches

· Code-rear Tire Qty 08

· FF: Accu-Lite Steel Armor 51408PK 22.5x8.25 PHP10-2 hand holes

· RR: Accu-Lite Steel Armor 51487PK 22.5x8.25 PHP10-5 hand holes

· Code-rear Rim Qty 08

FUEL TANKS: COMPLIES ___YES NO___

· 26” Aluminum 80 Gallon Fuel Tank RH BOC Paddle handle filler cap with threadless filler neck.

· 26” Aluminum 120 Gallon Fuel Tank LH U/C Includes steps for cab access. Paddle handle filler cap with threadless filler neck.

· Location LH U/C 120 Gallon

· Location RH BOC 80 Gallon

· DEF Tank Mounted LH BOC Models 220 and 520 mounted left hand back-of-cab

· DEF to Fuel Ratio 2:1 or Greater

· DEF Tank Medium, 24 Gal

BATTERY BOX AND BUMPER: COMPLIES ___YES NO___

· Aluminum Battery Box Above Rails Back of Cab

· Aftertreatment Aluminum Non-Slip Cab Entry Aftertreatment right-hand under cab step

· Aero Bumper, Molded 3-Piece, Painted Body Color

CAB AND EQUIPMENT: COMPLIES ___YES NO___

· Aero 124” BBC Alum Cab and Metton Hood w/SBFA Hood has stainless steel grille with chrome plated grille surround. Includes anti-blow down hood device.

· Thermal Insulation Package in Cab Includes thick, closed-cell foam in floor, special mylar-faced foam in walls and roof structure.

· LX Driver Seat LX Air seat, high height backrest, adjustable seat track length, 2 chamber lumbar support premium suspension with adjustable damping, auto leveling, exit air dump, memory for sitting height, fore-aft isolator with lockout, vinyl bellows over suspension, requires folding armrests, side and back storage pocket. Adds 40mm of increased space for steering wheel to chest and improved driver ingress/egress into cab and sleeper (knee sweep) with improved passenger side ingress/egress for personal cargo/luggage. Standard with fabric/vinyl finish – color coordinated with interior color.

· LX Passenger Seat LX Air seat, high height backrest, adjustable seat track length, 2 chamber lumbar support premium suspension with adjustable damping, auto leveling, exit air dump, memory for sitting height, fore-aft isolator with lockout, vinyl bellows over suspension, requires folding armrests, side and back storage pocket. Adds 40mm of increased space for steering wheel to chest and improved driver ingress/egress into cab and sleeper (knee sweep) with improved passenger side ingress/egress for personal cargo/luggage. Standard with fabric/vinyl finish – color coordinated with interior color.

· Drivers Armrests – LH & RH

· Passenger Armrest – LH only Required with Evolution LX seats, optional with Evolution ST Seats

· Black Seat Color IPO Standard Color

· Air Ride Driver

· High Back Driver

· Mordura Driver

· Air Ride Passenger

· High Back Passenger

· Mordura Passenger

· Steering Wheel with Multi-Function Includes logo on horn button, audio volume, seek, mute and mode button on LH pod with cruise control on/off/cancel, set/resume and accelerate/coast on the right pod.

· Adjustable Steering Column – Tilt/Telescope

· Vanity Mirror on Inside Sunvisors For use with ProBilt 1.9, Prestige (1.9 & 2.1) or Premier (2.1) interiors

· Prestige Interior – Sterling Gray

· Dark Window Tint IPO Standard Tint – Day Cab

· Day Cab Rear Window Day cab rear window flush to back of cab

· 1-Piece Glass Rear Cab Window Fixed

· 1-Piece Curved Windshield

· Power Door Locks and Power Window Lifts – Standard

· Combo Fresh Air Heater/Air Conditioner With radiator mounted condenser, dedicated side window defrosters, Bi-Level Heater/Defroster Controls, 54,500 BUT/HR, and all silicone heater hoses.

· Cup Holder (Floor Mounted) Includes two standard-size drink holders and one extra-large jugholder, coin tray and clipboard-size storage area.

· Outside Sunvisor – Stainless Steel

· Aero Rear View Mirror, Motorized Includes top mirror with motorized, adjustable dual axis heated glass. Bottom mirror is an integrated convex surface. Includes black textured arms with breakaway feature.

· Aero Rear View Mirror Housing – Body Color – Same color as vehicle body

· Lock Down Mirror Over Passenger Door – with Black Housing

· Air Horn Mounted Under Cab

· ConcertClass, AM/FM, Weatherband, 3.5 Aux

· Standard Speaker Package for Cab – 2 speakers

· Radio Mute When in Reverse – For automatic or automated transmission

· Bluetooth Phone and Audio Requires USB Port

· USB Port

· Cobra 29 CB Radio Mounted Center of Header Without weatherband. Mounted in center of header with sound tracker and illuminated panel. Includes wiring, microphone clip and speaker. Must select antenna(s) option.

· (1) Antenna for Factor Installed --- mounted vertical center

· SmartLINQ Remote Diagnostics

· 24 Months SmartLINQ Subscription with OTA

· Rear Wall Deep Record/Map Pocket

· Peterbilt Electric Windshield Wipers --- with Intermittent Feature

· Cab Air Suspension

· Auto Reset Circuit Protection – Daycab and Sleeper

· 18 Inch Cab Side Extenders, Includes 6.5 Inch – Rubber flares for daycab only

· Painted Cab Roof Fairing to Back of Cab Extender – Cab Side Extenders required

· Triangle Reflector Kit, Ship Loose

· Fire Extinguisher, Mounted Outboard Driver Seat --- Hazmat approval

· Backup Alarm

· Drive Axle #1 Front Oil Temperature Gauge – 52mm round

· Drive Axle #2 Rear Oil Temperature Gauge – 52mm round

· Engine Oil Temperature Gauge – 52mm round

· Air Suspension Pressure 1 Gauge – 52mm round

· Air Filter Restriction Pressure Gauge – Located in Digital Cluster Display

· Brake Application Air Pressure – Located in Digital Cluster Display

· Disable Brake Light with Engine Brake

· Up to (4) Additional Electric Switches Up to (4) additional electric switches without wiring. Switch will short pin 5 to pin 4 when off and pin 5 to 6 when on. Backlighting provided by Lin jumper

· Switch to Deactivate ATC Traction Control The ATC warning light will display in a constant state

· Engine Percent Torque – Located in Digital Cluster Display

· Main Instrumentation Panel Digital Cluster 15” Display Includes: Speedometer, Tachometer, Primary Air Pressure, Secondary Air Pressure, Fuel Level, DEF Level, DPF Filter Status, Fuel Economy, Oil Pressure, Coolant Temp, OAT and Voltmeter

· Manifold Pressure Gauge 52mm round, backlit. Physical gauges must be ordered in pairs and are limited to a total of 6.

· Trailer Brake Application Gauge 52mm round, backlit. Physical gauges must be ordered in pairs and are limited to a total of 6.

· Headlights Composite Fender Mounted Integral park, turn and side marker

· (5) Marker Lights, Aero LED On roof, visor or fairing

· Daytime Running Lights The brake interlock turns the daytime running lights off when the parking brakes are engaged.

· LED Stop/Turn/Tail/Backup Bracket mounted left-hand / right-hand end of frame

· (2) Load Lights, Bracket Mounted High Inboard Back of cab/back of sleeper

· (2) Load Lights, Bracket Mounted Low Outboard Back of cab/back of sleeper

PAINT: COMPLIES ___YES NO___

· Standard paint selection

· (1) Color Axalta Two Stage – Cab/Hood Base Coat/Clear Coat A – White Bumper – White Cab Roof – White Fender – White Frame – Black Hood Top – White Roof Fairing – White

OPTIONS: COMPLIES ___YES NO___

· Class 8 Standard Coverage 1 year/100,000 miles (160,000 km)

· PACCAR MX Standard Coverage 2 years/250,000 miles (400,000 km)/6,250 hrs

· Prepaid Freight Delivery

· Base Warranty: Emissions (CARB Surcharge) 5 year/350,000 miles MI- MX Engine<460HP

GENERAL BID REQUIREMENTS

NOTE: THE FOLLOWING REQUIREMENTS PERTAIN TO ALL ITEMS LISTED WITHIN THIS BID SPECIFICATION.

DELIVERY/PAYMENT: Delivery shall be considered complete and ready for payment process once all ancillary, allied, optional equipment, and manuals have been received, all systems checked against the specifications and the complete unit is deemed operational.

LINE SHEET: Three (3) Line set tickets shall be furnished with each vehicle.

MANUALS: For each vehicle being built, including cab and chassis, ancillary, allied or optional equipment purchased as built, the following manuals shall be available in hard copy, online or Flash Drive format.

Two (2) Parts Catalogs Two (2) Shop Manuals Two (2) Operator's Manuals Two (2) Training DVD’s Two (2) Electrical System Schematics/Drawings Note: Vendor to provide all information and / or hyper-links for access to manufacturers online manuals and training.

PRE-BUILD MEETING: Awarded vendor shall schedule a Pre-Build meeting within two weeks of bid award, prior to manufacturing/fabrication, to confirm all build specifications and dimensions.

PRE-DELIVERY SERVICE: Awarded vendor shall perform a complete pre-delivery service prior to delivering the unit to Department of Public Safety/Fire Marshal’s Office.

All Fluids filled to proper levels.

Cooling system shall be checked and filled to proper level and shall contain extended life antifreeze to -34° Fahrenheit.

All lights shall be checked to confirm they are in working order.

All functions of this unit, including all ancillary, allied and optional equipment shall be checked and in working order prior to delivery to Department of Public Safety/Fire Marshal’s Office.

TRAINING: The successful bidder shall be requested to provide a qualified factory authorized service representative to provide four (4) hours mechanical and four (4) hours operator training at end users location(s) in Carson City.