Document Summary

This document consists of technical engineering drawings and product specifications for two component parts: a 1.5 x 45 shell vial (Drawing C00008) and a 15mm star burst conical plug (Drawing C00259). The shell vial is manufactured from 51 glass clear material with specific dimensional tolerances including a 1.760-inch length with ±.033 tolerance, a .581-inch diameter (OD) with ±.010 tolerance, and a .501-inch diameter (ID) with ±.007 tolerance. The vial features slanted bottoms on vials with acceptance criteria of pass for slants at one inch or less and fail for slants greater than one inch. The conical plug is made from polyethylene with a primary outer diameter of .585 inches, an inner diameter of .505 inches, and a width of .520 inches, with a .300-inch base width tolerance of ±.010. Both components are subject to standard tolerance specifications including four-place decimals at ±.0005, three-place decimals at ±.005, two-place decimals at ±.01, fractions at ±1/64, and angles at ±1/4 unless otherwise specified.

The vial specification includes visual inspection for cracks, chips, black specks, and functional testing per part number 540SS8-15, while the conical plug requires visual inspection for flash, voids, short shots, and tearing, with functional testing per part number 4100-1545. Both components are maintained in stock in all colors with plastic bag packaging and regrind material specifications. The vial drawing was entered on 5/4/99 and the conical plug drawing was entered on 12/17/01, with the latter checked by REDD. The accompanying photographs show sample products: a box of 70% isopropyl alcohol wipes labeled for external use only, a box containing approximately 50 red caps or closures, and an individual clear glass vial with a red cap.