Specification[1].doc
DOC document 35 KB Posted
- Solicitation number
- RFQ - 17D - 10041600000000000985
- Issued by
- Kennebec County, Maine
About this file
This specification document outlines the requirements for a 100-ton hydraulic press of C-type configuration for the Maine Department of Transportation (Maine DOT). The equipment must feature a C-type design enabling work on three sides and come equipped with hand and foot controls, a vise table for leaf spring assembly, and sufficient capacity to accommodate additional equipment such as a U-bolt bender. The press shall include a hydraulic-operated vise with tempered steel anti-skid jaws, a 1-inch high sliding rail, and be capable of supporting accessories for removing and installing Hendrickson walking beam bushings and torque rod bushings, as well as Rayco torque rod bushings. The specification details comprehensive technical requirements across six main items: the primary press unit with a minimum 200,000-pound capacity at 2,550 psi, a 10.5 GPM pump, 10 HP motor, 3-phase 440V electrical requirements, and dimensional constraints not exceeding 3,650 pounds total weight and 100 inches in height; the vise assembly table with hydraulic operation and specific jaw dimensions; press adapters for multiple suspension components; and optional accessories including a U-bolt adapter kit. The equipment must be delivered to Maine DOT Fleet Service in Augusta, Maine, with all bid prices inclusive of shipping and delivery costs.
The specification requires that all bid proposals include manufacturer's standard warranty terms and conditions commencing from the in-service date, along with documentation of any exceptions to the listed specifications submitted on a separate sheet. Bidders must provide the equipment in lead-free paint per manufacturer standards, completely inspected and serviced prior to delivery, accompanied by two operator's manuals, one repair and maintenance manual, one parts manual, and one day of training provided by the manufacturer. All necessary paperwork including title, dealer's certificate, and invoices must accompany the delivered unit. Maine DOT reserves the right to pre-inspect equipment before delivery. Accessories pricing must be submitted separately as an option. No specific response dates, award dates, contract terms, or funding information is provided in this specification document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PO_Terms.doc | DOC document | |
| Press Size.pdf | ||
| HYD PRESS.doc | DOC document | |
| Press Adapters.pdf | ||
| VISE TABLE.doc | DOC document | |
| Press Bushing Adapters.pdf | ||
| Vise Table.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specification
100 Ton Hydraulic Press of the ‘’C type configuration’’
The following specification is intended to describe a 100 ton hydraulic press of the ‘’C type configuration’’ which enables you to work on 3 sides, it shall come complete with hand and foot controls, and have more than sufficient strength and power to add on additional equipment such as a (u-bolt bender). It shall come with a vise table for assembling leaf springs. Vise table shall have an anti skid tempered steel vise jaws, 1 ½ inch high sliding rail, for the general assembly of leaf springs.
Item 1 Press
1.1 Press cylinder shall have minimum capacity of 200,000 Lbs at 2,550 psi.
1.2 Pump shall be a minimum of 10.5 GPM at 1,800 RPM’s.
1.3 Press motor shall be a 10Hp, at 1755 RPM’s.
1.4 Electrical requirements shall be 3ph, 440V/13.5A.
1.5 Hydraulic cylinder shall be a minimum of 10inch diameter.
1.6 Hydraulic Cylinder stroke shall be a minimum of 18 inches.
1.7 Hydraulic Cylinder piston shall be a minimum 5 inch diameter.
1.8 Hydraulic oil reservoir shall be a minimum of 22 gallons.
1.9 Press total weight shall not exceed 3,650 Lbs.
1.10 Press height shall not exceed 100 inches.
1.11 Press shall have a minimum working depth of 11 inches.
Item 2 Vise Assembly Table
2.1 Vise assembly table shall have a hydraulic operated vise.
2.2 Vise jaws shall be made from tempered steel and have anti skid.
2.3 Vise jaw opening shall be a minimum of 14 inches.
2.4 Hydraulic cylinder shall be a minimum of 3 inch diameter.
2.5 Hydraulic cylinder shall have a minimum stroke of 14 inches.
2.6 Hydraulic cylinder piston shall be a minimum of 1 ½ inches.
2.7 Hydraulic cylinder shall be activated by the use of a foot pedal and powered in both directions.
2.8 Foot control pedal shall be guarded.
2.9 Table working height shall be a maximum 30 inches, with a maximum vise jaw height of 37 inches.
2.10 Vise assembly table top shall be a maximum of 50 inches by 50 inches.
Item 3 Press Adapters
3.1 Press adapters shall include all adapters to remove Hendrickson walking beam bushings for 38,000 to 44,000 Lbs walking beams.
3.2 Press adapters shall include all adapters to install Hendrickson walking beam bushings for 38,000 to 44,000 Lbs walking beams and adapter for the bar pin style ends.
3.3 Press adapters shall include all adapters to remove and install Hendrickson model 44694 torque rod bushings.
3.4 Press adapters for Rayco torque rod bushings.
Item 4 Accessories:
Accessories requested or required shall be listed on a separate sheet attached to specification sheet. Accessories pricing must be submitted separately as an option.
4.1 U bolt adapter kit for press to bend U bolts up to 1 ¼”
Item 5 Warranty
5.1 Manufacture’s standard warranty will apply.
5.2 Terms and conditions of warranty must be provided with bid proposal.
5.3 Manufacture’s warranty will start with the in-service date.
Item 6 General
6.1 Paint shall be manufactures standard “Lead Free”.
6.2 Equipment must be completely inspected and serviced by the vendor prior to delivery.
6.3 Press shall come with two operator’s manuals, one repair and maintenance manual, and one parts manual.
6.4 There shall be one day of training provided by the machine manufacture on the machine and all attachments.
6.5 Exceptions to specifications shall be listed on a separate paper and noted as exceptions and submitted with bid proposal. If exceptions are not listed as such it shall be considered that the vendor will comply with all specifications as listed.
6.6 All bid prices to include shipping and delivery to Maine DOT Fleet Service, 105 Capitol St. Augusta Me. 04330
6.7 Maine D.O.T. reserves the right to pre-inspect the equipment before delivery.
6.8 Upon delivery of unit or units all necessary paper work such as title, dealer’s certificate, and invoices shall accompany unit or units.
File details come from the government source that posted it. Updated .