Special Packaging Instructions - AK12079239.pdf
PDF 76 KB Posted
- Attached to
- Cylinder Assembly, Actuating Federal contract opportunity
- Solicitation number
- SPRDL1-25-R-0142
About this file
This document is a Special Packaging Instruction (DD Form 2169) for a cylinder (NSN 3040-01-207-9239) dated 5 May 2025. The detailed packaging instructions specify precise requirements for preserving, cleaning, and packaging a cylinder, including:
Key packaging specifications include filling the cylinder with manufacturer's recommended lubricant, sealing all openings with appropriate caps/plugs, applying preservative to unpainted/unplated exterior surfaces, and using a specific container constructed of 1" nominal lumber with 2" nominal lumber ends. The packaging must follow MIL-STD-2073-1 standards, with specific materials prescribed such as MIL-PRF-16173 Grade 4 preservative and MIL-PRF-121 Type II wrap. The unit pack weighs 230.0 lbs, occupies 3.611 cubic feet, and has dimensions of 45.3 x 9.7 x 14.2 inches. Blocking and bracing are precisely detailed in the accompanying diagram, with specific lumber sizes and quantities for points A, B, C, and D, and instructions to secure all blocking to the container's interior using nails or staples.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation No. SPRDL1-25-R-0142.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2079239 5 MAY 2025
AK12079239
D
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
6-372-002320 (12361) CYLINDER 19207
A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1 AND THE APPLICABLE
CONTAINER SPECIFICATION.
B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. WITH CYLINDER RODS FULLY RETRACTED, FILL WITH MANUFACTURER'S RECOMMENDED LUBRICANT.
THOUROUGHLY DRAIN EXCESS.
D. SEAL ALL OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. APPLY PRESERVATIVE TO ALL UNPAINTED/UNPLATED EXTERIOR SURFACES.
F. APPLY MATERIAL BETWEEN POINTS OF CONTACT OF ITEM WITH BLOCKING OR CONTAINER.
G. SEE PAGE 2 FOR CONSTRUCTION AND PLACEMENT OF BLOCKING/BRACING.
H. BOX SHALL BE CONSTRUCTED OF 1" NOMINAL LUMBER WITH 2" NOMINAL LUMBER ENDS AND NO END CLEATS
REQUIRED.
I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
001 NONE
MIL-STD-2073-1, METHOD 20
MIL-STD-2073-1 AND NOTE B
MIL-STD-2073-1 AND NOTE B
10. UNIT PACK CU. (CU. FT.)
3.611
11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
230.0 20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1 AND NOTE I
NOT APPLICABLE
MIL-STD-129
b. LEVEL B
16. MARKING
a. LEVEL A
1C 2D 3E 4F 5G 6H
A/R A/R A/R A/R
PRESERVATIVE: SEE NOTES
CAPS/PLUGS: NAS847
PRESERVATIVE: MIL-PRF-16173, GR 4
WRAP: MIL-PRF-121, TY II
BLOCKING AND BRACING: ASTM-D6199
CONTAINER: ASTM-D6880, CL 2, ST 4 (MOD)
SIZE 42-1/4 X 8-1/4 X 10
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
45.3 X 9.7 X 14.2
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
3040-01-2079239 5 MAY 2025
AK12079239
D
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
6-372-002320 (12361) CYLINDER 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
File details come from the government source that posted it. Updated .