SPEC Sweatpants CRFD-02359A MC 8-17-2021.pdf

CRFD-02359A

28 March 2013

SWEATPANTS, MARINE CORPS

OD GREEN 522-STANDARD SAMPLE ROLL 3844 FOR SHADE ONLY.

SALIENT CHARACTERISTICS: THE BASIC MATERIAL FOR THE SWEATPANTS SHALL BE CIRCULAR

JERSEY KNIT FLEECE, 55% (+/- 5%) COTTON WITH THE REMAINDER POLYESTER, 7.5 (+/-0.5)

OUNCES PER SQUARE YARD. THE SWEATPANTS SHALL HAVE A 4 NEEDLE, 1-1/4 INCH COVERED

ELASTIC WAISTBAND WITH A CONCEALED DRAW-CORD AND SHALL HAVE 1/4 INCH WIDE

ELASTIC AT THE CUFF OF EACH LEG. THE FRONT AND BACK RISE SHALL BE COVERSTITCHED,

AND ALL SEAMS SHALL BE OVER- LOCK STITCHED. THE MARINE CORP LOGO SHALL BE

PRINTED IN BLACK ON THE FRONT OF THE LEFT LEG, CENTERED AS SHOWN IN FIGURE 1.

SIZES: THE SWEATPANTS SHALL BE PROVIDED IN THE FOLLOWING SIZES:

SMALL

MEDIUM

LARGE

X-LARGE

XX-LARGE

FINISHED MEASUREMENTS:

SIZES 1/2 WAIST 1/2 WAIST FRONT BACK

. (RELAXED) (STRETCHED) RISE RISE

SMALL 12 19 14 14

MEDIUM 14 21 14-1/2 14-1/2

LARGE 16 23 15 15

X-LARGE 18 25 15-1/2 15-1/2

XX-LARGE 19 26 16 16

TOLERANCE +/-3/4 +/-3/4 +/-1/2 +/-1/2

SIZES OUT INSEAM LEG LEG

. SEAM OPENING OPENING

. (RELAXED) (STRETCHED)

SMALL 40-3/4 28-1/2 5 7

MEDIUM 42-3/4 30 5 7

LARGE 44-3/4 31-1/2 5 7

X-LARGE 46-3/4 33 5 7

XX-LARGE 48-3/4 34-1/2 5-1/8 7-1/8

TOLERANCE +/-3/4 +/-3/4 +/-1/2 +/-1/2

METHOD OF MEASURING:

1/2 WAIST (RELAXED) - MEASURE ACROSS TOP OF

PANTS WITH WAIST LAYING FLAT, RELAXED, FROM

FOLDED EDGE TO FOLDED EDGE.

1/2 WAIST (STRETCHED)- MEASURE ACROSS TOP OF

PANTS WITH WAIST LAYING FLAT, STRETCHED.

FRONT/BACK RISE - MEASURE FROM TOP OF PANTS AT

AT WAIST TO CROTCH SEAM.

OUT SEAM - MEASURE FROM TOP OF PANTS AT WAIST

TO BOTTOM OF LEG ALONG FOLD OF FABRIC, FOLLOWING

NATURAL SHAPE OF SIDE SEAM.

INSEAM - MEASURE SEAM FROM CENTER CROTCH TO

BOTTOM OF LEG.

LEG OPENING (RELAXED) - MEASURE FROM SIDE TO

SIDE AT LEG BOTTOM, (RELAXED).

LEG OPENING (STRETCHED) - MEASURE FROM SIDE TO

SIDE AT LEG BOTTOM, (STRETCHED).

QUALITY ASSURANCE PROVISIONS;

THE CONTRACTOR SHALL ASSURE THAT ALL ITEMS ARE FREE OF CONSUMER TYPE DEFECTS

SUCH AS: ANY HOLE, CUT , TEAR , RUN; COLOR NOT AS SPECIFIED ; SHADED PART,ANY SPOT, STAIN, OR FOREIGN MATTER. LINER NOT PROPERLY SIZED OR TOO TIGHT OR

EXCESSIVE FULLNESS; ANY REPAIR, OR MEND; ANY COMPONENT PART MISPLACED; ANY

OPERATION OMITTED OR NOT PROPERLY PERFORMED; ANY OPEN SEAM, LOOSE

OR TIGHT STITCH TENSION, ANY ROW OF STITCHING OMITTED, BROKEN STITCH, ONE OR MORE

SKIPPED STITCHES, TWO OR MORE CONSECUTIVE; NEEDLE HOLES OR NEEDLE CHEWS;

IDENTIFICATION/SIZE LABEL OMITTED, LEGEND NOT AS SPECIFIED; BAR CODE LABEL

TAG OMITTED OR NOT READABLE BY SCANNER, HUMAN OR ILLEGIBLE, NOT VISIBLE ON

PACKAGED ITEM, CAUSES DAMAGE TO THE ITEM. LABELS ARE TO BE COMMERICAL. TRUNKS

MAY BE SHIPPED IN POLY BAGS OF 6 ITEMS PER BAG, WITH A BARCODE AND LABEL CITING

CONTRACT NUMBER, NSN, ITEM DESCRIPTION AND SIZE.

SECTION D- PACKAGING AND PACKING

PACKAGING AND PACKING SHALL BE IN ACCORDANCE WITH ASTM D3951 (STANDARD PRACTICE

FOR COMMERCIAL PACKAGING). SHIPPING CARTONS SHALL BE MARKED IN ACCORDANCE WITH

5.1.6.3 OF ASTM D3951 AND SHALL INCLUDE CONTRACT NUMBER AND ITEM DESCRIPTION.

SECTION D- PACKAGING AND PACKING