SF18_SPE1C121Q0223.pdf

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE1C1-21-Q-0223

1. REQUEST NO.

2021 SEP 07

2. DATE ISSUED

0091013594

3. REQUISITION/PURCHASE REQUEST NO. RATING

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: KIMBERLY HORGER DKH0058 Tel: DSN312-444-5137 Email: Kimberly.Horger@dla.mil

120 DAYS ADO

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2021 SEP 30

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 89 PAGES

CONTINUED ON NEXT PAGE

SPE1C1-21-Q-0223

Form

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

Part 12 Clauses

SECTION B

USMC Sweatpants NSN 8415-01-443-7722(s)

PGC 02359

PRICING

FIRM FIXED QUANTITY: 13,824 PR

THIS REQUEST FOR QUOTE (RFQ) WILL RESULT IN A FIRM FIXED QUANTITY CONTRACT.

NSNs, UPC Codes and Sizes

USMC Sweatpants PGC 02359

Solicitation Number: SPE1C1-21-Q-0223 Opening/Closing Date and Time: September 7, 2021/September 30, 2021 @ 3:00 PM, local (Philadelphia) time--Eastern Standard Time (Philadelphia time), or when applicable, Eastern Daylight

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

Savings Time

NOTE: IT IS A REQUIREMENT THAT ALL PROPOSALS, MODIFICATIONS, AND WITHDRAWALS BE

PLAINLY MARKED ON THE OUTERMOST ENVELOPE WITH THE SOLICITATION NUMBER, CLOSING

DATE AND TIME SET FOR THE RECEIPT OF PROPOSALS. FAILURE TO COMPLY WITH THIS

REQUIREMENT MAY RESULT IN AN OFFEROR'S PROPOSAL NOT BEING PROCESSED PROPERLY AND

ULTIMATELY REJECTED AS UNTIMELY IN ACCORDANCE WITH FEDERAL ACQUISITION

REGULATIONS (“FAR”) CLAUSE 52.212-1(f).

FOR THIS SOLICITATION ONLY:

Technical Proposal will be accepted via Email only.

Technical Proposals (documents) WILL NOT be accepted via mail or hand-carried (UPS, FedEx, DHL etc…) or hand-carried in-person delivery.

FOR THIS SOLICITATION ONLY:

Email offers for Technical Proposals will be accepted.

Guidance for email offers for Technical Proposals is as follows:

Entire Technical Proposal documents must be returned.

a. This includes entire solicitation document (all pages) with appropriate clauses filled in; Place of Performance (all places of performance) including name and address of location filled out; Qualified Laboratory and Source Sampling Name and address filled out; and Identification of Sources for All Components for Clothing/Textile Items filled out.

b. Prices must be filled out for all items and all terms (Base term and Option terms if Option terms apply).

Transmit “email” offers (if authorized; see “Addendum” to 52.212-1(b)) or offer modifications/withdrawals to: Marcia Henson at: Marcia.Henson@dla.mil, and Kimberly Horger at Kimberly.Horger@dla.mil.

Please send emailed offers to all of the authorized email addresses listed above (on the same email) to ensure that your proposal is received.

NOTE: Email servers may have a lag time. There may be a lag time between the date/time stamp the offeror submits offer via email versus the date/time stamp that offer is received by the authorized email address. Lag times WILL NOT be considered. Any Technical Proposal and any correspondence that is received with a date/time stamp beyond the closing date and time of subject solicitation shall be considered late and shall not be accepted or considered.

NOTE: For this solicitation, DIBBS is NOT an authorized method of submitting an offer.

Email submission for offers (technical proposal) are the only accepted transmission for this solicitation.

NOTE: Two (2) Pair PDMs are required for the USMC Sweatpants in Size LARGE and SIZE MUST BE INDICIATED ON THE LABEL. PDMS will be evaluated for visual, manufacturing, and dimensional requirements.

Please see 52.215-9020, Instructions for Submitting Product Demonstration Models. CAUTION: The PDM's may only be furnished with the offeror's proposal at the time and date of the initial closing of the solicitation. Subsequent submissions will not be permitted, even if deficiencies exist in the submitted PDM's. Therefore, the offeror must furnish its best effort with their proposal. Correction of the PDMs will not be accepted by the Government. Failure to submit the required PDMs will result in rejection of your entire offer.

mailto:Marcia.He
nson@dla.mil mailto:Kimberly.Horger@dla.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

Offerors shall submit TWO (2) PR (pair) PDMs, SIZE LARGE. Two (2) PR (pair) of PDMs must be submitted for every intended place of performance, including all proposed subcontractors. Materials used to manufacture the PDM

(s) shall be in accordance with any specifications defined in Section C of this solicitation. No alternative materials are allowed.

PDM SUBMISSION:

Product Demonstration Models are required to be submitted through traceable means via mail or UPS, FedEx, DHL etc… PDMs cannot be submitted electronically through DIBBS email and cannot be delivered via hand carried in-person.

If a Product Demonstration Model is not submitted by date and time of the closing, your offer will be considered incomplete and entire offer will be rejected. The time for receipt of offer is 3:00 P.M. Eastern Standard Time (Philadelphia time), or when applicable, Eastern Daylight Savings Time on the return date.

A vendor's inability to submit an offer caused by failure of a vendor's hardware, software, Internet Service Provider, the World Wide Web itself or failure of delivery on time via mail or commercial carrier for PDMs, is not cause for extension of a solicitation.

If an offeror chooses to submit a response to the solicitation electronically and through other allowed means per the solicitation, the later dated version for that offeror will be what the Government will evaluate as your latest offer.

FOR THIS SOLICITATION ONLY:

Only PDMs will be accepted via mail or via commercial carrier UPS, FedEx, DHL etc…

NO PDMs will be accepted via “hand-carried” in-person delivery to the Business Opportunities Office (BOO)

Block 9 Address and Submit “mailed”* proposals to:

Defense Logistics Agency DLA Troop Support Post Office Box 56667 Philadelphia, PA 19111-6667

Opening/Closing Date and Time: September 7, 2021/September 30, 2021 @ 3:00 PM, local (Philadelphia) time.

* “MAILED PROPOSAL” applies in the circumstance where a proposal is sent via the United States Postal Service (USPS), including any of the individual mailing services offered by the USPS (i.e. First-Class Mail, Priority Mail, Priority Mail Express, etc.).

› Address and Deliver “hand-carried” proposals, including delivery by commercial carrier, shall be sent and delivered to the following address:

DLA Troop Support Business Opportunities Office

Bldg. 45, 1st Floor, Wing C, Room 167 700 Robbins Avenue Philadelphia, PA 19111-5092

Opening/Closing Date and Time: September 7, 2021/September 30, 2021 @ 3:00 PM, local

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

(Philadelphia) time.

* “HAND-CARRIED PROPOSAL” applies when the offeror intends to deliver its proposal in-person directly to the Business Opportunities Office (“BOO”) at the address above. NOT ACCEPTED FOR THIS SOLICITATION

* “HAND-CARRIED PROPOSAL” Further, the above address is also applicable when the offeror submits its proposal via a commercial carrier (e.g., UPS, FedEx, DHL, etc.). COMMERCIAL CARRIERS WILL BE ACCEPTED FOR THIS

SOLICITATON FOR PDMS ONLY.

NOTE: Specification and Technical Data are listed as attachments to this RFQ.

NOTE: NO HAND CARRIED TECHNICAL PROPOSALS OR PDMS WILL BE ACCEPTED VIA AN “IN-PERSON” DELIVERY TO THE

BUSINESS OPPROTUNITIES OFFICE.

**PDMs SHALL ONLY BE DELIVERED VIA A COMMERICAL CARRIER (via UPS, FedEx, DHL etc…) OR or the United States Postal Service (USPS).**

DESTINATION FOR DELIVERY

SD0131 VSTZ

TRAVIS ASSOCIATION FOR THE BLIND

AF & MC 3PL - DISTRIBUTION SERVICES

4512 SOUTH PLEASANT VALLEY ROAD

AUSTIN, TEXAS 78744

DELIVERY FOB: DESTINATION

QUANTITY VARIANCE: PLUS 2% MINUS 2%

INSP/ACCEP POINT: Destination

DELIVERY REQUIREMENTS

(a) The Government will insist on delivery in strict accordance with the contractual delivery schedule. The dates specified for delivery are the dates required for arrival of the supplies at destination. When transportation terms are free on board (f.o.b.) origin, in order for this delivery to be satisfied, the Contractor should release shipment to the carrier 15 days prior to the date shown in the schedule.

(b) When Defense Logistics Acquisition Directive (DLAD) clause 52.211-9020 entitled "Time of Delivery - Accelerated Delivery" applies, the Contractor may deliver any time prior to, but no later than the specified delivery date as defined in paragraph (a) above.

(c) If accelerated delivery is not authorized, i.e., DLAD 52.211-9020 is not included in the award, the Contractor may deliver as follows without prior authorization of the Contracting Officer:

(1) For an f.o.b. origin award, the Contractor may release the shipment 15 to 30 days prior to the delivery date cited in the contract.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

(2) For an f.o.b. destination award, the Contractor may deliver up to 15 days prior to the scheduled delivery date.

(End of Text)

CAUTION NOTICE

-SECTION 833 of the National Defense authorization Act for Fiscal year 2006 added language to 10 U.S.C.

2533a, requiring that all articles or items of “clothing,” including the materials and components thereof, purchased by the Department of Defense be grown, reprocessed, reused, or produced in the United States, other than sensor, electronics or other items added to, and not normally associated with, clothing (and the materials and components thereof).

-E-Mails are authorized for this solicitation. Please send your response to the Contracting Officer

- The Solicitation will result in a Firm Fixed Quantity contract.

-RFID is required at item, case and pallet level for ship to destination.

- The unit prices are required to be based on FOB Destination. Inspection and Acceptance are at Destination.

- First Article submission is hereby waived. Pre-award samples may be requested.

- It is preferred that the material used to manufacture the pre-production samples be in accordance with any specification defined in Section C of this solicitation. However, if the offeror uses alternate materials to manufacture the samples a letter must be supplied with them stating (i) which materials depart from the end item specification and (ii) that, although the material used in producing the Pre-Production Sample differs from those specified, the material required by the specification will be utilized under any resultant contract.

- Offers will be evaluated based on the Firm Quantity of 13,824 EA. The Government reserves the right to make an award on initial offers received; therefore, your best offer should be submitted.

- Acceleration of deliveries is permitted at no additional cost to the Government only if authorized by the Contracting Officer.

- 52.212-3-- Offeror Representations and Certifications -- Commercial Items.

As prescribed in 12.301(b)(2), insert the following provision:

Offeror Representations and Certifications -- Commercial Items (Nov 2017)

- The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

NOTE: Please note that the Patient Protection and Affordable Health Care (“the Act”), 124 Stat. 119, imposes duties upon employers concerning the provision of health care to their employees. Health insurance costs, including any costs associated with compliance with changes in the applicable law, are the sole responsibility of the offeror. Offerors are advised that their proposals should include any costs associated with the implementation of the Act. Any changes in health coverage costs and/or costs associated with compliance, http://farsite.hill.af.mil/reghtml/Regs/far2afmcfars/fardfars/Far/12.htm http://www.sam.gov/portal

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED) occurring after award of a contract pursuant to this solicitation will not form the basis for an equitable adjustment of the contract price.

- THIS ACQUISITION WILL RESULT IN A FIRM FIXED QUANTITY CONTRACT.

- THE FIRM QUANTITY IS 13,824 EA.

- THE EFFECTIVE PERIOD OF THIS CONTRACT IS FROM THE DATE OF AWARD THROUGH FINAL

SCHEDULED DELIVERY DATE.

- PALLETIZATION IS REQUIRED FOR THESE SUPPLIES

- Inspection and Acceptance are at DESTINATION. FOB: DESTINATION

- Quality Systems Requirements: DPSCM 4155.3 QUALITY SYSTEMS REQUIREMENTS DOCUMENT, DATED

NOVEMBER 3, 1997, HAS BEEN REVISED AND REPLACED WITH DLA TROOP SUPPORT CLOTHING AND

TEXTILES ADDITIONAL QUALITY REQUIREMENTS (OCTOBER 2018). THE REVISED DOCYMENT

INCORPORATES MAJOR CHANGES TO THE PREVIOUS REVISION. PLEASE READ IT IN ITS ENTIRETY.

COPIES OF THIS DOCUMENT CAN BE FOUND AT: http://www.dla.mil/TroopSupport/ClothingandTextiles/ CTIndustry/ (Under C&T Additional Quality Assurance Requirements)

- NOTICE TO DLA SUPPLIERS

- This solicitation contains DFARS Clause 252.211-7006, Radio Frequency Identification (Jun 2016). This clause requires the successful awardee(s) to affix passive RFID tags, at case and palletized unit load levels. The successful awardee(s) is also required to electronically submit advance shipment notices to DOD, to permit association of the passive RFID tag data with the corresponding shipment.

- THE USE OF ELECTRONIC SUBMISSION OF DD FORM 1222 IS AUTHORIZED.

Identification of Sources for All Components for Clothing/Textile Items

IDENTIFICATION OF SOURCES FOR ALL COMPONENTS FOR CLOTHING/TEXTILE ITEMS

(a) The offeror shall indicate below the names and addresses of those suppliers from whom each component will be obtained for use in the performance of any resultant contract. In addition, for each component, the offeror shall also identify the name of the item's manufacturer and the address of the manufacturing location. Failure to furnish this information with the offer may result in rejection of the offer.

(b) No change in the supplier(s) or manufacturer(s) listed below shall be permitted between the opening/closing date of the offer and the award, except where time permits and then only upon receipt of the Contracting Officer's written approval.

(c) Any change in the supplier(s) or manufacturer(s) listed below, and in any resultant contract, is prohibited unless it is specifically approved in advance by the Contracting Officer.

http://www.dla.mil/TroopSupport/ClothingandTextiles/CTIndustry/ http://www.dla.mil/TroopSupport/ClothingandTextiles/CTIndustry/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

52.215-6 -- Place of Performance.

Place of Performance (Oct 1997)

(a) The offeror or respondent, in the performance of any contract resulting from this solicitation, intends[ ], does not intend[ ] [check applicable block] to use one or more plants or facilities located at a different address from the address of the offeror or respondent as indicated in this proposal or response to request for information.

(b) If the offeror or respondent checks “intends” in paragraph (a) of this provision, it shall insert in the following spaces the required information:

(End of Provision)

Business Systems Modernization (BSM) Delivery Terms and Evaluation

BUSINESS SYSTEMS MODERNIZATION (BSM) DELIVERY TERMS AND EVALUATION

(a) This acquisition is being conducted under business systems modernization (BSM). Quotes/offers in response to

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED) this solicitation will be evaluated as specified in the solicitation.

(b) Delivery shall be quoted/offered in terms of a number of days after date of order (ADO). The number of delivery days requested in this solicitation is calculated based on the Government's planned need and customer requirements.

Unless delivery is identified elsewhere in the solicitation as an evaluation factor, quoters/offerors are encouraged to conform their delivery terms as closely as possible to the delivery days requested. If delivery is not identified as an evaluation factor, there will be no evaluation preference, or penalty, for quotes/offers of fewer delivery days than the number of delivery days requested by the Government. Quoting/offering a greater number of delivery days than requested may result in the quote/offer not being considered.

Time of Delivery - Ordering Office

TIME OF DELIVERY - ORDERING OFFICE

Material ordered under the terms of this Contract shall be delivered within 90 days after date of order for the initial delivery order and 90 days after date of order for all subsequent delivery orders. Notwithstanding any other provisions or clauses of this Contract, no deliveries shall be made prior to issuance of the delivery order on Department of Defense (DD) Form 1155.

REQUIREMENTS FOR QUANTITY INCREMENTS OR RANGES

Offers are requested for increments or ranges of quantities as listed in the schedule of supplies or services. The awarded quantity, or quantities in the case of multiple items, will be based on the requirements of the Government and the combination of price and quantity per item that is most advantageous to the Government.

Quantity increments consist of a primary amount and alternate amounts based on incremental increases. The quantity awarded will be either the full primary or one of the alternate quantities.

Quantity ranges consist of a specific series of ranges. The quantity awarded may fall anywhere within any range.

If this is an invitation for bids (IFB), a bid that only contains prices for quantities other than those quantities solicited in the schedule of supplies or services will be determined to be non-responsive.

If this is a request for quote (RFQ) or a request for proposal (RFP), an offer that only contains prices for quantities other that those quantities indicated in the schedule of supplies or services may be precluded from consideration for award if the Contracting Officer elects to make an award without discussion of proposals.

If this solicitation requests offers for quantity ranges, the following apply:

The unit price applicable to the entire award quantity shall be the unit price offered for the quantity range in which the award quantity falls;

If an offer specifies the same price for all quantity ranges of an item, the offer may include a statement in the schedule of supplies or services that the unit price applies to all quantity ranges of that item. If an offer specifies different

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED) prices for a quantity range of an item, the offer must show a unit price in each quantity range column in the schedule of supplies or services.

Award may be made on the basis of that quantity and price combination that is most advantageous to the Government without discussion of proposals.

Cost or pricing data, if required, shall be furnished at the request of the Contracting Officer and need not be submitted with your offer.

If this solicitation includes an option provision, option prices must be included for each increment.

Availability of Clothing Patterns

AVAILABILITY OF CLOTHING PATTERNS

Government-furnished clothing patterns will be delivered to the Contractor within 14 days after the date of award. In the event patterns are not delivered within 14 days after award or are delivered incomplete, it is the Contractor's responsibility to notify the Government, in writing, by certified mail. Such notification must be mailed to the Contracting Officer within 30 days from date of award. Timely notification of late delivery upon Contracting Officer's verification will result in a day for day extension of the delivery schedule for each day or delay beyond the initial 14-day period. Failure to provide the above notice will preclude any adjustment of delivery schedule as a result of late receipt of Government-furnished patterns.

INSPECTION AND ACCEPTANCE AT DESTINATION

52.212-4 -- Contract Terms and Conditions -- Commercial Items. (Oct. 2018)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or re-performance of nonconforming services at no increase in contract price. If repair/replacement or re-performance will not correct the defects or is not possible, the government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights --

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED

SUPPLIES

The Contractor shall remove or obliterate from a rejected end item and its packing and packaging, any marking, symbol, or other representation that the end item or any part of it has been produced or manufactured for the United States Government. Removal or obliteration shall be accomplished prior to any donation, sale, or disposal in commercial channels.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

(End of TQ Requirement)

PRODUCTION FACILITY CHANGES

(a) The performance of any of the work contracted for in any place other than that named in the contract is prohibited unless specifically approved by the Contracting Officer. Written requests for a change in production facilities must be submitted in writing to the Contracting Officer. Changes in production facilities may be approved, provided:

(1) Performance by small business or in labor surplus areas as required by the contract will not be changed;

(2) The change will not cause a delay in delivery or necessitate a change in the purchase description;

(3) The free on board (f.o.b.) point is not changed; and

(4) Each request is supported by a price reduction of $250.00 to cover the Government's administrative costs to process the change.

(b) The Government reserves the right to deny approval even if these four elements are met.

(End of Text)

ADMINSTRATIVE COSTS OF REPROCUREMENT AFTER DEFAULT

If this contract is terminated in whole or in part for default pursuant to the clause included herein entitled "Default," and the supplies or services covered by the contract so terminated are repurchased by the Government, the Government will incur administrative costs in such repurchases. The Contractor and the Government expressly agree that, in addition to any excess costs of repurchase, as provided in paragraph (b) of the "Default" clause of the contract, or any other damages resulting from such default, the Contractor shall pay, and the Government shall accept, the sum of $1,350.00 as payment in full for the administrative costs of such repurchase. This assessment of damages for administrative costs shall apply for any termination for default following which the Government repurchases the terminated supplies or services, regardless of whether any other damages are incurred and/or assessed. (End of clause)

SHADE EVALUATION OF CONTRACTOR FURNISHED MATERIALS:

- SHADE SAMPLING IS APPLICABLE

- The color of the test specimen shall match the standard sample viewed using AATCC Evaluation Procedure 9, Option A, with sources simulating artificial daylight D75 illuminant with a color temperature of 7500 (+/- 200)°K, with illumination of 100 (+/- 20) foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2856 (+/- 200)°K.

- FOR SHADE TESTING: THE COMPLETED DD FORM 1222 AND THE SWATCHES SHALL BE FORWARDED TO:

DLA Product Testing Center Analytical 700 Robbins Avenue Philadelphia, PA 19111

ATTN: BLDG 5D

EMAIL: paactlab@dla.mil

- FOR PHYSICAL (NON-SHADE) TESTING: IN ACCORDANCE WITH CLAUSE 52.246-9032, THE CONTRACTOR'S

APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT

FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE QAR WILL FORWARD THE

COMPLETED DD FORM 1222. SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON

REQUEST TO:

DLA Product Testing Center Analytical 700 Robbins Avenue mailto:paactlab@dla.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

Philadelphia, PA 19111

ATTN: BLDG 5D

EMAIL: paactlab@dla.mil

- THE USE OF ELECTRONIC SUBMISSION OF DD FORM 1222 IS AUTHORIZED.

SHADE EVALUATION OF CONTRACTOR FURNISHED COMPONENTS

Contracts awarded under this solicitation shall require shade evaluation of Contractor furnished components in accordance with the following provisions:

(a) Swatches shall be cut by the Contractor from those pieces or rolls selected by the Government representative. For yard goods, the dimensions of each swatch shall be 4" x 12" while for narrow loom material each swatch shall be a full width and 12" in length. The number of pieces or rolls to be sampled shall be in accordance with the following table:

Lot Size Pieces to be sampled

1 to 8 pieces Each piece

9 to 25 pieces 8 pieces

26 to 90 pieces 20 pieces

91 to 160 pieces 32 pieces over 160 pieces 1 of 5 pieces

(b) The swatches shall be submitted to the Government laboratory for shade evaluation. If any swatches are rejected, the end items made from the rejected component lot shall also be rejected. In these instances, the Contractor shall without cost to the Government, cut additional shade swatches from each remaining piece or roll in the rejected sample lot which was not previously sampled and submit these swatches to the Government for shade evaluation.

(c) Swatches submitted in accordance with (a) and (b) above, shall also be evaluated for uniformity of shade when so specified in section 3 of the fabric specification and when the standard sample is referenced for uniformity of shade.

(End of Text)

SHIPPING INSTRUCTIONS

Shipping instructions shall be provided with individual delivery orders. Destinations include various Department of Defense using activities and may include Defense Logistics Agency (DLA) depot locations.

(End of Text)

POINT OF CONTACT FOR TRANSPORTATION INSTRUCTIONS

(a) For Defense Contract Management Agency (DCMA) administered orders to include DCMA Americas, Canada:

The Contractor shall contact the transportation officer at the administering DCMA location. To obtain the applicable Government shipping document/instructions, 7 days prior to shipment availability, the Contractor shall use the Shipping Instructions Request (SIR) web-based eTool application available through the DCMA's website http://www.

mailto:paactlab@dla.mil http://www.dcma.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

DCMA.mil at http://www.dcma.mil/itcso/cbt/SIR/index.cfm.

(b) For DCMA International outside contiguous United States (OCONUS) administered orders (excluding DCMA Americas, Canada): The Contractor shall either use Department of Defense (DD) Form 1659 or the DCMA SIR eTool as directed by the DCMA International Transportation Office.

(1) An electronic version of the DD Form 1659 can be accessed at: http://www.dtic.mil/whs/directives/infomgt/forms/ eforms/dd1659.pdf or may be obtained from the responsible DCMA International Contract Administration Office (CAO) Transportation Office.

(c) For Defense Logistics Agency (DLA) administered orders: The Contractor shall contact the DLA Distribution Supply Chain Transportation Office Helpdesk for shipping instructions at 1-800-456-5507 or via e-mail to delivery@dla.mil (preferred). The DLA Distribution's operating hours are Monday through Friday, 6:00 a.m. to 5:30 p.m. eastern standard time, excluding holidays. The DLA Vendor Shipment Module (VSM), previously known as the Distribution Planning and Management System (DPMS), available at https://vsm.distribution.dla.mil, may be used to obtain transportation instructions in lieu of contacting the transportation office.

52.246-15 Certificate of Conformance (Sep 2016)

CERTIFICATE OF CONFORMANCE

(a) Unless otherwise specified in the contract, the Contractor shall furnish a certificate of conformance for packaging, packing, labeling, marking and unitization materials and their performance in use in lieu of government sampling and testing. Performance in use applies to joint strength of strapping and tension of unit load strapping. The unitization materials covered by the certificate of conformance shall not include pallets.

Examination and testing of pallets shall be performed in accordance with specification requirements unless otherwise stipulated in the contract.

(b) When specified, the Contractor may also furnish a certificate of conformance for certain components/ ingredients or end item characteristics. The Contractor may still furnish a certificate covering any of the foregoing even though a subcontractor provided the materials. In such event, the Contractor is responsible for assuring that the materials met all contract requirements. For this reason, the Contractor should request a certificate of conformance from the subcontractor.

(c) The certificate of conformance should be worded substantially as follows:

(1) I certify that all (indicate type of material) called for by the contract conform to applicable contract requirements in every particular. (For meats only, the Contractor must also state that "no distressed, reconditioned meat has been used.")

(2) Such materials consist of the following: (Specify quantity, manufacturer and nomenclature for each item.)

Signature and Title of Certifying Official

Distribution: One copy to origin inspector, when applicable. One copy with shipment when origin USDA/ USDC inspection is not required. One copy with invoice for payment when Department of Defense (DD) form 250 is not used.

(d) It is the intent of the Government to be able to rely on the certificate of conformance. To assure that the http://www.dcma.mil/ mailto:delivery@dla.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED) certificate is reliable, the Government reserves the right to perform verification testing of each component for which specifications are established in the contract. Random samples shall be personally selected by the cognizant Government inspector. Random samples of packaging, labeling, packing and marking materials shall be submitted to the DLA analytical laboratory with a copy of the DD form 1222 furnished to DLA Troop Support HSQ. Food component materials shall be sent to the laboratory servicing the inspector's organization.

All costs incident to the sampling and submittal of materials shall be borne by the Contractor. The reliability of the Contractor's certificate of conformance will be determined on the basis of Government verification results.

(1) When it is determined by DLA Troop Support HSQ that the DLA analytical laboratory test samples meet the contract requirements, the certificate of conformance for these materials is considered reliable.

(2) When DLA Troop Support finds the materials do not meet the contract requirements based on recognized statistical methods, the certificate of conformance is considered unreliable. The Contractor shall be so advised and the particular deficiencies which render such certificate unreliable shall be identified. The unreliability status may be continued from contract to contract regardless of the particular contract on which the verification tests, or submission by Contractor of nonconforming material, has occurred. The Contractor is responsible for all costs incurred by the government in performing tests of future samples submitted for testing after such time as the Government has informed the Contractor of the unreliability status and until reliability is again established to the satisfaction of the Contracting Officer. Testing and administrative costs shall be assessed at the prevailing rate.

PROCUREMENT NOTES:

L06, Agency Protests (DEC 2016)

Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer. Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

ATTACHMENT I - EVALUATION FACTORS PLAN

SECTION L

TECHNICAL EVALUATION FACTORS

(To be addressed in Volume I of the offeror's proposal in accordance with DLA Troop Support solicitation provision, Instructions for Preparing Proposals)

(1) Product Demonstration Model(s) (Only Evaluation Factor)

52.215-9020 Instructions for Submitting Product Demonstration Models (PDM) for Supply Chains at DLA Troop Support (formerly DSCP). (NOV 2011) - DLAD

(a) The offeror shall submit Product Demonstration Models (PDM), as specified below, as part of its proposal.

Models will be submitted at no expense to the Government and must be received prior to the time and date set forth for closing of offers. PDMs will be returned at the offeror's request and expense so long as the PDM(s) is(are) not destroyed by testing, retained by the Government as a manufacturing standard, and/or unless otherwise specified by

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED) the solicitation. PDMs will become Government property unless return is requested within 30 days after date of award.

Item: USMC SWEATPANTS No. of Units Required: 2 PAIR Size: Size LARGE (ALL PDM'S SUBMITTED MUST BE SIZE LARGE AND SIZE MUST BE INDICATED

ON THE LABEL ON THE PDM)

*NOTE: Two (2) pair of PDMs must be submitted for every intended place of performance, including all proposed subcontractors.

(b) Models will be tested or evaluated to determine compliance with all characteristics specified for such test or evaluation as referenced in FAR 15.3. Failure of models to conform to all such characteristics may result in the rejection of the entire offer. Failure to furnish models by the time and date specified in the solicitation may be cause for rejection of the entire offer if not otherwise acceptable under the provisions for considering late offers.

The following applies only when checked as paragraph (c):

[X ] If the PDM will be used as a manufacturing standard, for the successful offeror(s), the Government will return one approved Product Demonstration Model (PDM) which will serve as a manufacturing standard. Products delivered under any resulting contract shall conform to the approved model as to the characteristics listed for test or evaluation and shall conform to the specification/commercial product description characteristics.

Offerors shall submit TWO (2) PR (pair) PDMs, SIZE LARGE. Two (2) PR (pair) of PDMs must be submitted for every intended place of performance, including all proposed subcontractors. The materials used to manufacture the PDM(s) shall be in accordance with any specifications defined in Section C of this solicitation. However, shade will not be evaluated.

(End of Provision)

***PLEASE NOTE: TWO (2) PAIR OF PDM(s) ARE REQUIRED FOR EACH PROPOSED PLACE OF PERFORMANCE.

IF YOU INTEND TO SUBCONTRACT A PORTION OF THE REQUIREMENT, TWO (2) PAIR OF PDM(s) MUST BE

SUBMITTED FROM THE PROPOSED SUBCONTRACTOR'S PLACE OF PERFORMANCE***.

NOTE: PDM(s) MAY ONLY BE FURNISHED WITH THE OFFEROR'S PROPOSAL AT THE TIME AND DATE OF THE INITIAL CLOSING OF THE SOLICITATION. SUBSEQUENT SUBMISSIONS WILL NOT BE PERMITTED, EVEN IF DEFICIENCIES EXIST IN THE PDM(s) SUBMITTED; THEREFORE, THE OFFEROR MUST FURNISH ITS BEST EFFORT AT THIS TIME. CORRECTIONS OF THE PDM WILL NOT BE ACCEPTED BY THE GOVERNMENT.

SECTION M

EVALUATION FACTORS FOR AWARD DLA TROOP SUPPORT

The Technical Evaluation, in the form of Product Demonstration Model, provides the acceptability of the USMC Sweatpants. This is done through the establishment of minimum requirements to be evaluated on an “acceptable' or “unacceptable” basis.

(1) Product Demonstration Models (PDMs) will be reviewed for:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

a. Conformance to manufacturing operation requirements of the specification

b. Conformance to visual requirements of the specification

c. Conformance to dimensional requirements of the specification

The following technical acceptable/unacceptable Ratings will be assigned:

*NOTE: “Clearly meeting the minimum requirements of the solicitation” means the offer complies with all of the terms and conditions of the solicitation and the offer's PDM(s) meet the definition of PDM acceptability defined below.

**NOTE: “Not clearly meeting the minimum requirements of the solicitation” means the offer does not comply with all of the terms and conditions of the solicitation and/or the offer's PDM(s) DO NOT meet the definition of technical acceptability defined below.

PDM ACCEPTABILITY is defined as: PDM(s) meet the requirements of the acquisition documentation (i.e.

Specification; commercial item description, purchase description, etc.), and indicates an adequate approach and understanding of the requirements. The PDM(s) have at most a moderate number of weaknesses. Strengths and weaknesses are offsetting or will have little or no impact on contract performance. The PDM(s) meet the stated requirements.

*NOTE: Weaknesses are defined as deviations from the requirements as specified in the specification, commercial item description, purchase description etc. PDMs will be rated based on the frequency and severity of weaknesses.

**NOTE: Price Evaluation---For each item the total price will be calculated by taking the offeror's proposed unit price and multiplying it by the corresponding evaluative quantity. This calculation will be done for each of the performance periods (base and option years). The total price for each item (inclusive of options) will be added together to arrive at the total proposal price. The total proposal price of each offeror will be compared against the other offerors. The Government will select the lowest price/technically acceptable offeror and determine if that firm is responsible, complies with terms and conditions of the solicitation and an award to that firm is in the best interest of the Government.

***NOTE: This evaluation does not necessarily determine the pricing to be fair and reasonable. Pricing for each item will need to be determined fair and reasonable. Additionally, pricing significantly unbalanced between any of the performance periods may result in a determination that the pricing cannot be determined fair and reasonable. Failure to determine the pricing fair and reasonable may result in the removal of the offeror from award consideration.

SWEATPANTS, MARINE CORPS 7/22/2021

PGC 02359

NSN: 8415-01-443-7722

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 89 PAGES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND

QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A

FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

SWEATPANTS MARINE CORPS, GREEN

SHALL BE MADE IN ACCORDACE WITH

CRFD-02359A DATED 28 MARCH 2013

SHADE STANDARD OD GREEN 522, ROLL NUMBER 3858

50/50 POLYESTER/COTTON

IDENTIFICATION LABEL: EACH SWEATPANT SHALL

HAVE A SEWN ON COMMERCIAL TYPE FIBER

IDENTIFICATION, SIZE AND CARE LABEL.

BAR CODE LABEL/TAG: EACH ITEM SHALL BE

INDIVIDUALLY BAR- CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER TAG SHALL

BE STANDARD BLEACHED SULFATE HAVING A BASIS

WEIGHT OF 100 POUNDS. THE PAPER USED FOR THE

TAG SHALL HAVE A SMOOTH FINISH TO ACCEPT THERMAL

TRANSFER AND DIRECT PRINTING. THE TAGS SHALL

HAVE A HOLE AND BE ATTACHED WITH A FASTENER.

THE TAGS SHALL BE CLEARLY LEGIBLE AND READABLE

BY SCANNER. THE BAR CODING ELEMENT SHALL BE A

13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL

BE A 12 DIGIT UPC NUMBER ASSIGNED FOR ALL NSNS

BY THE PROCURING AGENCY. THE INITIALS "UPC" MUST

APPEAR BENEATH THE UPC CODE. THE BAR CODE

FOR THE NSN AND UPC TYPE SHALL BE A MEDIUM TO

HIGH DENSITY AND SHALL BE LOCATED SO THAT IT IS

COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED

AND/OR PACKAGED AS SPECIFIED AND SO IT CAUSES NO

DAMAGE TO THE ITEM. THE UPC CODE MUST ALSO

BE PLACED ON ALL CARTONS ON WHICH THE NSN APPEAR

AQLS SHALL BE AS FOLLOWS: END ITEM DIMENSIONAL 4.0 - INSPECTION LEVEL S-3 VISUAL

4.0 INSPECTION LEVEL II . ACCEPTABILITY OF LOTS SHALL BE DETERMINED BY THE USE OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4. . SHADE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

SWATCHING EVALUATION REQUIREMENT 52.246-9031 (A) SAMPLING: NOTWITHSTANDING ANY CURRENT PROVISIONS OF THE FABRIC SPECIFICATION, THE FOLLOWING SHADE EVALUATION SHALL APPLY TO THIS SOLICITATION. A 4X12 INCH SHADE SWATCH WILL BE CUT BY THE CONTRACTOR FROM THOSE PIECES OR ROLLS SELECTED BY THE GOVERNMENT REPRESENTATIVE, IN ACCORDANCE WITH THE FOLLOWING TABLE:

LOT SIZE (PIECES) PIECES TO BE SAMPLED 1 TO 8 EACH PIECE 9 TO 25

8 PIECES 26 TO 90 20 PIECES 91 TO 160 32 PIECES OVER 160

PIECES 1 OF EVERY 5 PIECES THE SWATCHES SHALL BE IDENTIFIED AND SUBMIT TO THE DLA TROOP SUPPORT LABORATORY FOR SHADE EVALUATION. IF ONE OR MORE OF THE SHADE SWATCHES ARE FOUND UNACCEPTABLE, THE ENTIRE LOT SHALL BE REJECTED. A LOT THAT WAS REJECTED FOR SHADE SHALL BE SCREENED AND ALL DEFECTIVE PIECES IN THE LOT SHALL BE REMOVED BEFORE SUCH A LOT IS RESUBMITTED. RESUBMITTED LOTS SHALL AGAIN BE SUBJECTED TO THE SAMPLING AND SHADE

EVALUATION PRESCRIBED HEREIN. THIS REQUIREMENT DOES NOT NEGATE THE CONTACTOR'S

RESPONSIBILITY TO PERFORM SHADE EVALUATION PRIOR TO THE SUBMITTAL OF A LOT TO THE GOVERNMENT. (B) WHEN SECTION 3 OF THE FABRIC SPECIFICATION CONTAINS A SPECIFIC REQUIREMENT FOR UNIFORMITY OF SHADE AND WHEN THE STANDARD SAMPLE IS REFERENCED FOR UNIFORMITY OF SHADE, THE SWATCHES SUBMITTED IN ACCORDANCE WITH (A) ABOVE SHALL ALSO BE EVALUATED FOR UNIFORMITY OF SHADE. (C) THE CONTRACTOR SHALL TRANSMIT THE SWATCHES TO: DLA PRODUCT TESTING CENTER ANALYTICAL 700 ROBBINS AVENUE PHILADELPHIA, PA 19111 ATTN: BLDG 5D EMAIL:

jamie.hieber@dla.mil PHONE: 215-737-3265 THE LETTER SHALL INDICATE "FOR GOVERNMENT SHADE APPROVAL" AND CONTAIN THE FOLLOWING INFORMATION: (1) NAME OF PRIME CONTRACTOR. (2) CONTRACT NUMBER. (3) NOMENCLATURE. (4) GOVERNMENT INSPECTION LOT NUMBER. (5) NUMBER OF SWATCHES BEING SUBMITTED. (6) QAR'S NAME. (7) NAME AND ADDRESS OF THE QAR'S BASE PLANT.

(8) PIECE NUMBER OF STANDARD SAMPLE CITED IN CONTRACT. (9) TALLY LIST WITH PIECE NUMBERS (NOT APPLICABLE TO CASE SWATCHING). (D) IF ANY SWATCHES ARE REJECTED BY THE DLA PRODUCT TESTING CENTER--ANALYTICAL FOR SHADE, THOSE PIECES FROM WHICH THE REJECTED SWATCHES WERE CUT WILL BE REMOVED FROM THE LOT. EACH PIECE ACCEPTABLE FOR SHADE FROM WHICH A SHADE SWATCH HAS BEEN REMOVED SHALL BE CUT BY THE CONTRACTOR FROM SELVAGE TO SELVAGE SO THAT THERE WILL BE NO EVIDENCE OF THE SHADE SWATCH CUT-OUT. THE PORTION REMOVED SHALL NOT BE INCLUDED IN THE YARDAGE INDICATED ON THE PIECE TICKET. (E) IF THE CONTRACTOR REWORKS AND RESUBMITS PIECES ORIGINALLY REJECTED FOR SHADE OR FINISH, IT SHALL NOT COMBINE THE REJECTED PIECES WITH NORMAL PRODUCTION OR WITH LOTS REJECTED FOR OTHER CAUSES. SUCH PIECES SHALL BE COMBINED TO FORM ONE RESUBMITTED LOT. EACH PIECE SHALL RETAIN ITS ORIGINAL PIECE NUMBER, SUFFIXED WITH AN "X". THE LOT NUMBER SHALL ALSO BE SUFFIXED WITH AN "X". The color and appearance of the trunks shall match the standard sample when viewed using AATCC Evaluation Procedure 9, Option A, with filtered tungsten lamps that approximate artificial daylight and having a correlated color temperature of 7500 +/- 200 K, with illumination of 100 +/- 20 foot candles, and shall be a good match to the standard sample under Incandescent A lamplight at 2856 +/- 200 K.# EACH PAIR OF PANTS SHALL BE NEATLY FOLDED AND INSERTED IN A CLOSE FITTING CLEAR POLYETHYLENE BAG. TWENTY FOUR PAIR PANTS OF ONE SIZE ONLY SHALL BE PACKED IN A SNUG FITTING FIBERBOARD SHIPPING CONTAINER CONFORMING TO ASTM-D5118, TYPE CF, STYLE RSC-L (LINER), GRADE 275, VARIETY SW, CLASS DOMESTIC. APPROXIMATE BOX DIMENSIONS ARE FURNISHED AS A GUIDE ONLY: LENGTH 23 1/2

INCHES, WIDTH 15 INCHES, DEPTH 15 INCHES

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR

SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 89 PAGES

SPE1C1-21-Q-0223

Part 12 Clauses (CONTINUED)

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS

OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS

"PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE…