SPEC.pdf

SHIP: NAVAL SUBMARINE SUPPORT FACILITY (NSSF)

ORIGINATOR: Russ Joyner 860-694-2452 DATE: 17 July 2025

NAICS - 333515

1. SCOPE:

TITLE: PROCUREMENT OF INDUSTRIAL PIPE CUTTING AND BEVELING

EQUIPMENT

2. REFERENCE/PLANS:

2.1 None

3. REQUIREMENTS:

3.1 Naval Submarine Support Facility (NSSF) New London requires Industrial Pipe Cutting and Beveling Equipment. The Contractor shall provide the following equipment/material:

3.1.1 ITEM NUMBER 80-4000-10, Wachs 1” Small Diameter Split Frame Machine, complete with 1” Frame Pinion Housing, Storage Case, Spare Fastener Kit, Hand Tools and Manual. 1” Machine is Collet only, (QTY 1).

3.1.2 ITEM NUMBER 80-4004-00, Universal Right Angle Air Drive Motor for SDSF Machine Series, (Standard), (QTY 1).

3.1.3 ITEM NUMBER 80-5201-10, Collet Kit for 1” SDSF Machine. Includes ½”, ¾”,1” O.D. Pipe Aluminum Collets, Collet Nut and Spanner Wrench, (QTY 1).

3.1.4 ITEM NUMBER 80-5101-10, Radial Feed Tool Slide Kit for 1” SDSF.

Includes Parting Slide, Beveling Slide, and Trip Assembly, (QTY 1).

3.1.5 ITEM NUMBER 80-4100-10, Radial Feed Socket Weld Removal Tool Slide for 1” SDSF, (QTY 1).

3.1.6 ITEM NUMBER 80-5102-10, Axial Feed Tool Slide Kit for 1” SDSF.

Includes Axial Slide and Trip Assembly, (QTY 1).

3.1.7 ITEM NUMBER 80-7010-04, Socket Weld Removal Insert Holder Kit, (QTY 1). Includes (1) each of the following:

3.1.7.1-P/N 80-7010-01: Insert Holder Kit, Axial Socket Weld Tool 3.1.7.2- P/N 80-7010-02: Insert Holder Kit, Short Dog Leg 3.1.7.3- P/N 80-7010-03: Insert Holder Kit, Long Dog Leg

3.1.8 ITEM NUMBER 80-7006-02, HSS Radial Socket Weld Removal Tool, 3/8” x ½”, 1.5” length-Standard, (QTY 10).

3.1.9 ITEM NUMBER 81-701-00, Insert Tooling, DuoEdge HSS, (QTY 20).

3.2 Contractor shall Deliver/Ship to (FOB Destination). Delivery must be accomplished between Monday - Friday between 0700 and 1330 EST.

Delivery location is as follows:

SUBBASE NEW LONDON CT

NSSF Business Office NLON, BLDG 478

ARGONAUT ROAD

LOWER SUBMARINE BASE

Groton, CT 06340 M/F: Jim Crudden Phone: 860-694-2424

4. NOTES:

4.1 For Contractor personnel that do not have a CAC card or an NCACS card, the following is required to obtain DBIDS credentials to gain access to the base:

a. Ensure you provide the names of personnel requiring access to the SUBASE to the NSSF POC. NSSF will pass the information to the SUBASE Pass and ID office as your Government Sponsor.

b. Upon arrival at SUBASE, Present valid identification, Real ID Act-compliant state driver's license. If you don’t have a Real ID compliant driver’s license, you can use a passport. If you don’t have a passport, you will be required to have an original birth certificate and your social security card (not just your number).

c. Present a completed copy of the SECNAV 5512/1 form to obtain your

d. background check. A copy of SECNAV 5512/1 can be obtained by contacting the NSSF POC. Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, fingerprints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential. You may now proceed to enter the base. The Government assumes no liability for failed background checks and all costs incurred as a result of failed background checks is the responsibility of the Contractor.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 None