FY_19_Lab_Base_Equipment_Solicitation.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart

12.6 & 13.5 of the Federal Acquisition Regulations (FAR), as supplemented with additional information included in Federal Acquisition Circular 2005-95 dated June 05 2019. The clauses and provisions referenced in this solicitation may be reviewed/obtained in full text form at http://farsite.hill.af.mil/vffara.htm.

Quotes are being requested and a written solicitation will not be issued. The award resulting from this procurement will be firm fixed price. The solicitation SPE60519Q0250 is issued as a Request for Quotation (RFQ). The clauses and provisions referenced in this solicitation may be reviewed/obtained in full text form at http://farsite.hill.af.mil/vffara.htm.

Scope of Contract:

Acquisition type: Unrestricted

SCHEDULE B:

The following pieces of laboratory equipment are required in support of testing/analyzing petroleum product lubricant oil. This is not being solicited on an “all or none basis" for the equipment listed below and the quoted price is all-inclusive. Quotations can be submitted on individual line items.

CLIN 0001:

Nomenclature: Density Meter, Benchtop

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Instrument shall adhere to ASTM D4052, Standard Test Method for Density.

• MU/I: EAsure reliable and accurate 4 digit density values within 0.0001 g/cm3 and temperature range from 0-100 degrees C.

• Instrument must include API functions in settings.

• Shall utilize either 110/115 volts or 220/230/240 volts 50/60Hz with United States style electrical plugs.

to match building voltage..

• Depth must be equal to or less than 30" to accommodate benchtop available space. Height and width is unrestricted.

• The equipment shall include a one-yU/I: EAr warranty.

• All instrument documentation must be provided via either email or on a CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference Anton Paar, Model: DMA- 4100M

SHIP TO:

FLC San Diego Petroleum Laboratory http://farsite.hill.af.mil/vffara.htm

199 Rosecrans St Bldg 70A Point Loma Annex San Diego, CA 92106

CLIN 0001AA

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0001.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0002:

Nomenclature: Existent Gum Bath, Jet Fuel

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description: Shall adhere to ASTM D381, Gum Content in Fuels by Jet Evaporation

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• The equipment shall include a one-yU/I: EAr warranty.

• Four bath unit with stU/I: EAm and air evaporation capability.

• Electrical requirements: must meet the voltage requirement of either 115 or 220 volts 60Hz with US style electrical.

• Must have a pressure regulator and an air flowmeter built-in as a single unit.

• Dimensions must not exceed: 39” x 27” x 30” to accommodate benchtop space.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6): MFG: Koehler Instruments, Model:

K33800.

SHIP TO:

FLC San Diego Petroleum Laboratory 199 Rosecrans St Bldg 70A Point Loma Annex San Diego, CA 92106

CLIN 0002AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0002

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0002)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0002AB

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0002.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0003:

Nomenclature: Centrifuge

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Instrument shall adhere to ASTM D893 provide a convenient mU/I: EAns of determining sediment and water content in crude oil, fuel oils, middle distillate fuels, and biodiesel.

The equipment shall include a one-yU/I: EAr warranty.

Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

Must have capacity for Four (4) oil test centrifuge tubes: long (100mL), short (100mL), pU/I: EAr (100mL), or finger tubes (12.5mL) Must accommodate 115V 60 Hz, 7A 230V 50/60 Hz, 3.5A power supply with US-style plug All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD Dimensions must be no grU/I: EAter than 36x29x20 in. (91.4x73.7x50.8 cm) and weight of 125 lbs (56.7 kg

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Koehler, Centrifuge

SHIP TO:

FLC Jacksonville FL Code 700, Fuel Dept.

8808 Somers Road, Bldg. 56 Jacksonville, FL 32226-2600

CLIN 0003AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0003

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0003)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0003AB

Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0003.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0004:

Nomenclature: Emulsion Analyzer

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description: Instrument shall adhere to ASTM D1401, Method for Water Separability of Petroleum Oils

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• The equipment shall include a one-yU/I: EAr warranty.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• Weight shall not exceed 75 lbs.

• Test positions shall accommodate 8.

• Automatic timer stop with audible alarm from 1 to 10,000 s.

• Bath capacity shall accommodate maximum of 30 liters.

• Safety fU/I: EAtures included are: low level protection, safety cut-off stirrer lift.

• Stainless steel stirrer paddle. No copper.

• Electrical requirements shall accommodate 230 V, 50 Hz/60 Hz, 2100 W or 115 V, 50 Hz/60 Hz, 1600

W

• Dimensions must be no grU/I: EAter than 440 mm x 440 mm x 700 mm (W x D x H)

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Anton PAAR, Model: DH5

SHIP TO:

FLC Jacksonville FL

Code 700, Fuel Dept.

CLIN 0004AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0004

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0004)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0004AB

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0004.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

CLIN 0005:

Nomenclature: Microbalance

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description: Instrument automatically detects static charges and warns you when your results are out of tolerance

• The equipment shall include a one-yU/I: EAr warranty.

• Must accommodate balance capacity of 26 grams with a rU/I: EAdability of 0.001 milligram (1 µg) to full capacity.

• Accommodate large color touchscreen display that is detachable from the main unit.

• Must accommodate 230/115/100 VAC, 50–60 Hz configurable/selectable power supply.

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Mettler Toledo XPE26, Model:

Micro Balance.

SHIP TO:

FLC Jacksonville FL Code 700, Fuel Dept.

CLIN 0005AA

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0005.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0006:

Nomenclature: Microseparometer (MSEP)

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description: Shall adhere to ASTM D3948, Determining Water Separation Characteristics.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• The equipment shall include a one-yU/I: EAr warranty.

• Shall be portable and contain a rechargU/I: EAble battery.

• Shall include: clU/I: EAr glass vial, turbidimeter, a mechanical mixer, plastic syringe and disposable coalescer filter.

• Electrical requirements: must meet the voltage requirement of either 115 or 220 volts 60Hz with US style electrical.

• Weight shall not exceed 45 pounds.

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Emcee, Model: 1140 Micro- Separometer.

SHIP TO:

NAVSUP FLC Rota Fuels Laboratory Building 55 Rota, Cadiz, Spain 11530

CLIN 0006AA

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0006.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

CLIN 0007:

Nomenclature: Density Meter, Benchtop

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Instrument shall adhere to ASTM D4052, Standard Test Method for Density.

• MU/I: EAsure reliable and accurate 4 digit density values within 0.0001 g/cm3 and temperature range from 0-100 degrees C.

• Instrument must include API functions in settings.

• Can utilize 110 VAC/60Hz with US-style plug.

• Depth must be equal to or less than 30" to accommodate benchtop available space. Height and width is unrestricted.

• The equipment shall include a one-yU/I: EAr warranty.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference Anton Paar, Model: DMA- 4100M

SHIP TO:

NAVSUP FLC Rota Fuels Laboratory building 55 Rota, Cadiz, Spain 11530

CLIN 0007AA

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0007.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0008:

Nomenclature: Ellipsometer, Jet Fuel Unit of Issue: U/I: EA

QTY: 0001

UNIT PRICE $_________

EXTENDED PRICE: $____________________

Description:

Instrument shall adhere to ASTM D3241, Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels, Annex A3 “Rating of D3241HU/I: EAter Tubes – Ellipsometric Method.”

• Shall mU/I: EAsure deposit thickness ranging 0 to 350nm.

• Shall utilize either 110/115 volts or 220/230/240 volts 50/60Hz with US style electrical plugs.

• Dimensions shall not exceed 12" x 16" x 14"

• Weight shall not exceed 17kg

• Shall conform to ASTM D3241 Annex 3.

• Shall use an optical detection system.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG Falex, Model: 430

NAVY FUELS DEPT

690 SAN CARLOS RD

PENSACOLA, FL 32508

CLIN 0008AA:

INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0008

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0008)

QTY: 1 U/I: EA

UNIT PRICE $__________________

CLIN 0008AB

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0008.

QTY: 0001 1 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0009:

Nomenclature: Existent Gum Bath, Jet Fuel

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

Description: Shall adhere to ASTM D381, Gum Content in Fuels by Jet Evaporation

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• Four bath unit with stU/I: EAm and air evaporation capability.

• Electrical requirements: must meet the voltage requirement of either 115 or 220 volts 60Hz with US style electrical plugs.

• Must have a pressure regulator and an air flowmeter built-in as a single unit.

• Dimensions must not exceed: 39” x 27” x 30” to accommodate benchtop space.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6): MFG: Koehler Instruments, Model:

K33800.

NAVY FUELS DEPT

690 SAN CARLOS RD

PENSACOLA, FL 32508

CLIN 0009AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0009

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0009)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0009AB:

Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0009.

QTY: 1 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0010:

Nomenclature: Emulsion Analyzer

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

Description: Instrument shall adhere to ASTM D1401, Method for Water Separability of Petroleum Oils

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• Weight shall not exceed 75 lbs.

• Test positions shall accommodate 8.

• Automatic timer stop with audible alarm from 1 to 10,000 s.

• Bath capacity shall accommodate maximum of 30 liters.

• Safety fU/I: EAtures included are: low level protection, safety cut-off stirrer lift.

• Stainless steel stirrer paddle. No copper.

• Electrical requirements shall accommodate 230 V, 50 Hz/60 Hz, 2100 W or 115 V, 50 Hz/60 Hz, 1600

DLA Energy Alaska Petroleum Laboratory BLDG 986 Warehouse Street JBER-Richardson, AK 99506

CLIN 0010AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0010

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0010)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0010AB:

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0010.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

CLIN 0011:

Nomenclature: Density Meter, Benchtop

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Instrument shall adhere to ASTM D4052, Standard Test Method for Density.

• MU/I: EAsure reliable and accurate 4 digit density values within 0.0001 g/cm3 and temperature range from 0-100 degrees C.

• Instrument must include API functions in settings.

• Can utilize 110 VAC/60Hz with US-style plug.

• Depth must be equal to or less than 30" to accommodate benchtop available space. Height and width is unrestricted.

• The equipment shall include a one-yU/I: EAr warranty.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference Anton Paar, Model: DMA- 4100M

SHIP TO:

DLA Energy Alaska Petroleum Laboratory BLDG 986 Warehouse Street JBER-Richardson, AK 99506

CLIN 0011AA

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0011.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0012:

Nomenclature: Emulsion Analyzer

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

Description: Instrument shall adhere to ASTM D1401, Method for Water Separability of Petroleum Oils

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• Weight shall not exceed 75 lbs.

• Test positions shall accommodate 8.

• Automatic timer stop with audible alarm from 1 to 10,000 s.

• Bath capacity shall accommodate maximum of 30 liters.

• Safety fU/I: EAtures included are: low level protection, safety cut-off stirrer lift.

• Stainless steel stirrer paddle. No copper.

• Electrical requirements shall accommodate 230 V, 50 Hz/60 Hz, 2100 W or 115 V, 50 Hz/60 Hz, 1600

Defense Logistics Agency Energy Laboratory Okinawa Chibana Compound, RTE #74 Bldg. 53145 Chibana Okinawa City, Okinawa, Japan 904-2143

CLIN 0012AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0012

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0012)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0012AB:

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0012.

QTY: 0001 U/I: EA

CLIN 0013:

Nomenclature: Net HU/I: EAt of Combustion, Automatic Isoperibol Calorimeter

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Shall adhere to ASTM D4809, Standard Test Method for HU/I: EAt of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter.

• Initial on-site installation/calibration/hands-on demonstration within 12 weeks of the equipment arrival.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• The equipment shall include a one-yU/I: EAr warranty.

• Electrical requirements must meet the voltage requirement of 230 Volts/50Hz with NEMA style electrical plugs.

• Dimensions to fit laboratory allotted space/ 42w x 46d x 51h (cm)

• Instrument must be capable of Precision Classification to 0.10%

• Four vessel capability with oxygen “bombs”

• Instrument must be capable of testing a minimum of 6 per hour

• Temperature resolution of 0.0001 °C

• System shall include software, PC, and accessories to support test method application.

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Parr, 6400 Calorimeter

Defense Logistics Agency Energy Laboratory Okinawa Chibana Compound, RTE #74 Bldg. 53145 Chibana Okinawa City, Okinawa, Japan 904-2143

CLIN 0013AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0013

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0013)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0013AB:

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment CLIN 0013.

CLIN 0014:

Nomenclature: FAME Tester

QTY: 0001 U/I: EA

UNIT PRICE $_________

DELIVERY DATE:_______________

Description:

Shall adhere to ASTM D7797, IP 583 and ASTM D7963

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• The equipment shall include a one-yU/I: EAr warranty.

• MU/I: EAsurement range: 10-150 ppm (mg/kg) FAME in Jet Fuels and 20 mg/kg to 20% FAME in

Distillate & Residual Fuels

• Sample size shall not exceed 50ml

• Temperature range: 5 to 35°C maximum

• Electrical requirements shall meet the voltage/ available in volts 50Hz.

• Dimensions to fit laboratory allotted space /equipment size must be less than 56cm height x 38cm wide x

42cm depth to accommodate available space.

• Weight must not exceed 75lbs.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG Seta Analytics, Fiji MF, Model SA5200-0.

SHIP TO:

FLC Yokosuka Sasebo Fuel Terminals Laboratory Mubanchi Akasaki-cho, Sasebo City, Nagasaki Pref, Japan 857-0064

CLIN 0014AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0014

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0014)

QTY: 0001 U/I: EA

UNIT PRICE $__________________

CLIN 0014AB:

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0014.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0015:

Nomenclature: FAME Tester

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Shall adhere to ASTM D7797, IP 583 and ASTM D7963

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• The equipment shall include a one-yU/I: EAr warranty.

• MU/I: EAsurement range: 10-150 ppm (mg/kg) FAME in Jet Fuels and 20 mg/kg to 20% FAME in

Distillate & Residual Fuels

• Sample size shall not exceed 50ml

• Temperature range: 5 to 35°C maximum

• Electrical requirements shall meet the voltage/ available in volts 50Hz.

• Dimensions to fit laboratory allotted space /equipment size must be less than 56cm height x 38cm wide x

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG Seta Analytics, Fiji MF, SHIP TO:

725 Oakridge Dr Romeoville, IL 60446

CLIN 0015AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0015

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0015)

QTY: 0001 U/I: EA

CLIN 0015AB:

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0015.

QTY: 0001 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $______________

DELIVERY DATE:_______________

CLIN 0016:

Nomenclature: FAME Tester

QTY: 0001 U/I: EA

UNIT PRICE $_________

EXTENDED PRICE: $____________________

DELIVERY DATE:_______________

Description:

Shall adhere to ASTM D7797, IP 583 and ASTM D7963

• Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

• All instrument documentation (if provided electronically) must be provided via either email or on a

CD/DVD.

• The equipment shall include a one-yU/I: EAr warranty.

• MU/I: EAsurement range: 10-150 ppm (mg/kg) FAME in Jet Fuels and 20 mg/kg to 20% FAME in

Distillate & Residual Fuels

• Sample size shall not exceed 50ml

• Temperature range: 5 to 35°C maximum

• Electrical requirements shall meet the voltage/ available in volts 50Hz.

• Dimensions to fit laboratory allotted space /equipment size must be less than 56cm height x 38cm wide x

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG Seta Analytics, Fiji MF, SHIP TO:

Pyongtaek Fuel Lab Camp Humphreys Bldg S 848 Anjongri, Pyongtaek 17815 KorU/I: EA, South

CLIN 0016AA:

Nomenclature: INSTALLATION, CALIBRATION & ONSITE DEMONSTRATION FOR CLIN 0016

(WITHIN TWO WEEKS OF ARRIVAL OF CLIN 0016)

QTY: 1 U/I: EA

UNIT PRICE $__________________

EXTENDED PRICE $____________

DELIVERY DATE:_______________

CLIN 0016AB:

Nomenclature: Accessory kit including all items needed to utilize and calibrate equipment for CLIN 0016

QTY: 0001 U/I: EA

UNIT PRICE $__________________

SPECIAL NOTE:

PlU/I: EAse state estimated delivery date after receipt of award (ROA).

Installation, calibration, and onsite demonstration to be completed no later than 2 weeks after delivery.

Invoicing and payment: Invoicing will be in accordance to Wide ArU/I: EA Work Flow (WAWF) Reference FAR 52.232-33 Payment by Electronic Funds Transfer-- System for Award Management (Oct 2018), and DFARS

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING

The following provisions and clauses apply to this acquisition: FAR 52-212-1, Instructions to Offerors Commercial Items; 52.212-2 Evaluation of Commercial Items; the evaluation criteria stated in paragraph (a) of the provision are as follows: The award will be offered to the Lowest Price Technically Acceptable (LPTA) offer made to the Government. 52.212-3 Offeror Representations and Certifications Commercial Items; 52.212-4, Contract Terms and Conditions Commercial Items and 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive orders – Commercial Items. In paragraph (b) of 52.212-5, the following apply:

FAR 52.203-6 ALT 1, 52.204-18, 52.209-6, 52.209-10, 52.219-6, 52.219-8, 52.222-21, 52.223-18, 52.225-13, and 52.232-34. FAR 52.203-3, 52.204-18, 52.209-7, DFAR 252.203-7005, 252.204-7003, 252.204-7008, 252.204-7011, 252.204-7012, 252.204-7015, 252.209-7004, 252.223-7006, 252.225-7001, 252.225-7002, 252.225-7020, 252.225-7031, 252.225-7048, 252.232-7003, 252.232-7006, 252.232-7010, 252.243-7001, 252.244-7000 and 252.247-7023. FAR 52.211-11 shall be applicable.

All responsible Offerors shall submit quotes to Anthony Brown, Anthony.t.brown@dla.mil and Orlando Merritt, Orlando.Merritt@dla.mil. Offers are due by July 31, 2019, 1:00pm U/I: EAstern (Fort Belvoir local time).

mailto:Anthony.t.brown@dla.mil mailto:Orlando.Merritt@dla.mil