Redacted Justification and Approval (Yokota AB).pdf
PDF 201 KB Posted
- Solicitation number
- SPE60318C5025P00013
- Issued by
-
Defense Logistics Agency Energy
About this file
This is a Justification and Approval (J&A) document for other than full and open competition issued by the Defense Logistics Agency (DLA) Energy. DLA Energy seeks to award a bilateral, out-of-scope contract modification to the incumbent contractor, Ahntech Inc., for personnel and management services related to the Additive Injection System at Yokota Air Base, Japan. The modification extends from November 1, 2026, through August 31, 2027 (ten-month base period), with a fully evaluated six-month extension option from September 1, 2027, through February 28, 2028. The existing parent contract, SPE60318C5025, was originally awarded to Ahntech on July 25, 2018, and was competitively solicited using full and open competition. The estimated total dollar value for this modification is redacted in the document.
The required services involve daily management, quality control, calibration, and routine maintenance of the Additive Injection System that converts commercial aviation turbine fuel (Jet-A) into military-specification jet fuel (JP-8) by injecting three critical additives: Fuel System Icing Inhibitor (FSII), Static Dissipative Additive (SDA), and Corrosion Inhibitor/Lubricity Improver (CI/LI). DLA Energy justified the sole-source award under 10 U.S.C. § 3204(a)(1) and FAR 6.103-1, asserting that Ahntech is the only responsible source capable of performing this work without unacceptable delays or mission risk. The justification emphasizes that the minimal scope and low dollar value create prohibitive barriers to entry for competitors, that mobilization costs for alternative contractors would exceed the contract value, and that operational continuity is critical to flight safety. A Notice of Intent to Sole Source was posted to SAM.gov on June 12, 2026, with a capability statement deadline of June 29, 2026; zero responses were received from industry, supporting the determination that no other viable sources exist. Price reasonableness will be established using streamlined commercial pricing procedures under FAR Parts 12 and 15, comparing the proposed price against identical commercial labor categories under the parent contract.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEFENSE LOGISTICS AGENCY
ENERGY
8725 JOHN J. KINGMAN ROAD
FORT BELVOIR, VIRGINIA 22060-6222
J&A Tracking Number:
Justification for Other than Full and Open Competition
1. Summary/Introduction:
The Defense Logistics Agency (DLA) Energy, a Major Subordinate Command of DLA, is the contracting activity for bulk petroleum products and services for the Department of War (DoW).
This Justification and Approval (J&A) is for the acquisition of personnel to manage the Additive Injection System at Yokota AB, Japan. The existing Misawa contract SPE60318C5025, awarded July 25, 2018, is for a four-year base period, one five-year option period, and a six-month extension option to Ahntech Inc. (Ahntech). The following justification is presented to support the decision to award new work via a contract modification to Ahntech for the remainder of the option period effective November 01, 2026, through August 31, 2027, and a six-month extension option from September 01, 2027, through February 28, 2028. The estimated total dollar value for this acquisition is .
2. Nature and/or description of the action being approved (FAR 6.303-2(b)(2)):
This Justification and Approval (J&A) authorize and documents the use of other than full and open competition to procure personnel and management services for the Additive Injection System at Yokota Air Base (AB), Japan. This requirement will be executed as a bilateral, out-of-scope modification to existing Contract SPE60318C5025 awarded to Ahntech and is funded by FY26 Defense Working Capital Funds. The period of performance consists of a ten-month base period extending from November 01, 2026, through August 31, 2027, alongside a fully evaluated six-month extension option extending from September 01, 2027, through February 28, 2028. The statutory authority permitting this action is 10 U.S.C. § 3204(a)(1), as implemented by FAR 6.103-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements.
Ahntech, the incumbent contractor currently executing identical bulk petroleum and additive operations at Misawa AB, is the only responsible source capable of satisfying the Government's requirement without causing unacceptable delays. Ahntech possesses the requisite specialized technical expertise, cleared personnel, and a fully established logistical footprint within the Japanese operational theater. Market research indicates that the abbreviated duration and localized scope of this requirement present prohibitive barriers to entry for alternative vendors.
Transitioning this requirement to a new contractor would result in a substantial duplication of mobilization, equipment procurement, and administrative costs that the Government cannot expect to recover through competition.
Utilizing Ahntech’s existing infrastructure and supply chain allows the Government to rapidly absorb this new requirement at the most advantageous cost. Furthermore, uninterrupted additive injection services are a critical operational necessity. Any lapse in contractual coverage at
Yokota AB would immediately disrupt aviation fuel supplies, causing severe degradation to the installation's flying mission and generating an unacceptable risk to military operational readiness.
3. Description of supplies or services required to meet the agency’s need (including estimated value) (FAR 6.303-2(b)(3)):
The current contract was solicited using full and open competition and was competitively awarded to Ahntech on July 25, 2018. The required services involve the daily management, quality control, calibration, and routine maintenance of the Additive Injection System located at Yokota AB, Japan. The primary purpose of the Additive Injection System at Yokota AB is to convert standard commercial aviation turbine fuel (Jet-A) into military-specification jet fuel (JP- 8). Because the US military relies on commercial fuel supplies for logistics and cost-efficiency, the base uses this injection equipment to automatically blend precise amounts of additives directly into the fuel stream during bulk storage or refueling operations.
The injection system treats the commercial fuel with three vital components required for flight safety:
Fuel System Icing Inhibitor (FSII): Prevents water dissolved in the fuel from freezing at high, sub-zero altitudes, which would otherwise clog fuel lines and stall aircraft engines.
Static Dissipative Additive (SDA): Increases the electrical conductivity of the fuel. This prevents the dangerous buildup of static electricity during rapid high-pressure refueling, significantly reducing the risk of explosions or fires.
Corrosion Inhibitor / Lubricity Improver (CI/LI): Protects the aircraft's fuel system components, pumps, and engine parts from rusting and premature wear.
Automated Additive Injection System management is strictly necessary to ensure the chemical blend is perfectly uniform, preventing human error and guaranteeing the fuel meets strict MIL- DTL-83133 standards. The estimated value of this additional effort is , with the performance period aligned with the remaining period of performance of the base contract.
The proposed service is an additional requirement for managing the new Additive Injection System at Yokota AB, Japan. The requirement is for the remaining ten months of the option period effective November 01, 2026, through August 31, 2027, and a six-month extension option from September 01, 2027, through February 28, 2027.
4. Identification of the statutory authority permitting other than full and open competition (FAR 6.303-2(b)(4)):
This J&A is based upon the authority of 10 U.S.C. §3204(a)(1) as implemented by Federal Acquisition Regulation 6.103-1. The services required by the agency are only available from one responsible source and no other type of service will satisfy the agency’s requirements.
5. Demonstration that the proposed contractor’s unique qualifications or the nature of the acquisition requires use of the authority cited (FAR 6.303-2(b)(5)):
Awarding this minimal scope of work to any source other than the incumbent, Ahntech, would result in a substantial and non-recoverable duplication of costs to the Government. Ahntech is currently performing overarching fuel management services at Misawa AB under the parent contract and already possesses the fully qualified, technically certified, and base-cleared personnel required to safely operate fuel systems on-site. Utilizing a separate contractor would require them to mobilize personnel, secure base access, and establish independent oversight. The mobilization, administrative, and safety-compliance costs to stand up an external contractor for this minor requirement would far exceed the actual value of the services.
Furthermore, due to the extremely minimal scope and low dollar value of the Additive Injection System management task, it lacks commercial viability for competitors. It is highly improbable that any other responsible commercial source would find this requirement economically viable or profitable to bid on as a standalone effort. Ahntech is uniquely positioned to absorb this highly specialized task with zero mobilization delay and negligible additional overhead, as their personnel and equipment are already fully integrated into the Misawa AB fuel yard.
Finally, competing this requirement separately would introduce extreme operational and safety risks. Given the vital nature of FSII, SDA, and CI/LI additives, any delay, mismanagement, or lack of coordination between the primary fuel contractor and a separate Additive Injection System contractor could result in off-specification fuel. Failure to strictly adhere to MIL-DTL- 83133 standards poses a direct threat to flight safety, including risks such as engine stalling due to ice or static fires during refueling, which would jeopardize the mission capability of aircraft operating out of Misawa AB. Ahntech is the only source that can seamlessly execute this work without mobilization lead times or disjointed fuel handling, ensuring zero disruption to safe military fuel support.
6. Description of the efforts made to ensure that offers are/were solicited from as many potential sources as is/was practicable, including whether a notice was or will be publicized as required by Subpart 5.2 and, if not, which exception under 5.202 applies (FAR 6.303- 2(b)(6)):
To validate market conditions, a Notice of Intent to Sole Source (Notice ID: SPE60318C5025- P00013) was posted to the Governmentwide Point of Entry (SAM.gov) on in accordance with FAR 5.101. The notice provided a clear description of the requirement and gave all responsible sources until , to submit capability statements. As of the closing date, zero (0) capability statements, inquiries, or alternative proposals were received. This lack of response confirms the prohibitive barriers to entry and substantiates the conclusion that only the incumbent possesses the capability to perform this work without causing unacceptable mission risk.
7. Determination by the contracting officer that the anticipated cost to the Government will be fair and reasonable (FAR 6.303-2(b)(7)):
The Contracting Officer will determine the anticipated cost to the Government to be fair and reasonable prior to the execution of the modification. Because this requirement meets the definition of a commercial service, price reasonableness will be established using streamlined commercial pricing procedures in accordance with FAR Parts 12 and 15. The Contracting Officer's analysis will primarily rely on commercial market analysis techniques, specifically comparing the proposed price against the for identical commercial labor categories currently utilized under the parent contract. Consistent with commercial acquisition policies, the Government will not request data other than certified cost or pricing data unless price reasonableness cannot be established through these preferred market-based comparative methods. The basis for the fair and reasonable price determination will be documented in the contract file.
8. Description of the market research conducted and the results or a statement of the reason market research was not conducted (FAR 6.303-2(b)(8)):
In compliance with FAR Part 10, DLA Energy conducted thorough market research to identify potential sources and alternative solutions for this requirement. Market research was conducted by the Contracting Officer and the requiring activity to determine the availability of commercial sources capable of performing the additive injection services at Yokota AB, Japan. Based on historical knowledge of the operating environment and the specialized nature of the localized requirements, Ahntech was identified as the only vendor with the requisite personnel, existing logistical footprint, and technical expertise currently positioned to seamlessly integrate and manage the new Additive Injection System without causing unacceptable delays or mission failure.
To further validate this finding and maximize transparency, a Notice of Intent to Sole Source (Notice ID: SPE60318C5025-P00013) was posted to the Governmentwide Point of Entry (SAM.gov) on June 12, 2026, in accordance with FAR 5.101. The notice clearly detailed the requirement and provided industry with the opportunity to submit capability statements by June 29, 2026. As of the close of the response period, zero (0) capability statements, inquiries, or alternative proposals were received from industry.
Therefore, based on the specialized technical requirements of the Additive Injection System and the complete lack of response from the commercial market via the SAM.gov synopsis, the Contracting Officer has determined that Ahntech remains the only responsible source capable of satisfying the agency's requirements.
9. Any other facts supporting the use of other than full and open competition, such as (FAR 6.303-2(b)(9)):
(i) Explanation of why technical data packages, specifications, engineering descriptions, statements of work, or purchase descriptions suitable for full and open competition have not been developed or are not available.
Not applicable.
(ii) When 6.302-1 is cited for follow-on acquisitions as described in 6.302-1(a)(2)(ii), an estimate of the cost to the Government that would be duplicated and how the estimate was derived.
Not applicable.
(iii) When 6.302-2 is cited, estimated cost, or other rationale as to the extent and nature of the harm to the Government.
Not applicable.
10. A listing of the sources, if any, that expressed, in writing, an interest in the acquisition (FAR 6.303-2(b)(10)):
DLA Energy failed to receive any responses to the Notice of Intent to Sole Source.
11. Actions that may be taken to remove or overcome barriers to competition before any subsequent acquisition for the supplies or services are required (FAR 6.303-2(b)(11)):
There are no known actions that will allow DLA Energy to overcome the competition barriers for this requirement.
File details come from the government source that posted it. Updated .