Attachment_6_-_C_AND_E_QAPS_Conformed_Amd_0003.pdf

DEFENSE LOGISTICS AGENCY ENERGY

8725 JOHN J. KINGMAN ROAD

FORT BELVOIR, VIRGINIA 22060-6222

Signature

Prepared by:

Quality / Technical Support Office Approval:

Contracting Approval:

DISTRIBUTION STATEMENT – A: APPROVED FOR PUBLIC RELEASE. DISTRIBUTION IS UNLIMITED

C36 FUEL OIL, INTERMEDIATE, GRADE RME-180 (IFO 180) (DLA ENERGY DEC 2016)

NATIONAL STOCK NUMBER PRODUCT NOMENCLATURE DLA ENERGY PRODUCT CODE

9140-01-443-5048 Fuel Oil, Intermediate RME

Supplies delivered under this contract, the Contractor shall conform to all International, Federal, State, and local environmental requirements applicable to the geographic location of the receiving activity on the date of delivery. The Contractor shall also comply with all applicable International Agreements, Treaties, Conventions, and the like to which the United States is a signatory or with whose terms the receiving activity has otherwise agreed to comply, including but not limited to, the requirements of MARPOL 73/78 Annex VI Regulations 14 and 18. The Contractor shall be responsible for determining the existence of all such requirements prior to the time deliveries are made. This includes delivery of fuel and documentation in a manner consistent with any existing or after-imposed Title V (Clean Air Act) Permits. The list of such requirements contained in this contract is not intended to be a complete list, and the Contractor shall be responsible for determining the existence of all such requirements. Selected regional environmental requirements are highlighted in the SPECIFICATIONS (CONT’D) clause. In the event that an International, Federal, State, and/or local environmental requirement, as identified above, is more stringent than a requirement contained in this contract, the Contractor shall deliver product(s) that complies with the more stringent requirement. Product(s) that fails to meet the more stringent requirement will be considered nonconforming supply.

Product(s) to be supplied shall fully meet the requirements of the applicable specification(s). In the event that compliance with the more stringent requirement causes the contractor to incur additional costs, the contractor may request an equitable adjustment.

Product shall conform to the latest revision of ISO 8217 for Intermediate Fuel Oil, RME, 180.

(a) SPECIFICATION MODIFICATION:

(1) APPROVED ALTERNATE TEST METHODS. Other than the test methods called for in ISO 8217, these test methods, below, may be used to determine the following requirements:

REQUIREMENTS TEST METHOD

Density @15oC, kg/m3 ASTM D 4052 Carbon Residue ASTM D 4530 Vanadium, mg/kg ASTM D 5863 Aluminum plus silicon, mg/kg ASTM D 5184

(2) FOR THE BULK PROGRAM. RME-180 (IFO 180) purchased under the DLA Energy Bulk Purchase Program shall not exceed a revised maximum sulfur weight percent of 3.5.

(b) SAMPLING REQUIREMENTS: Unless otherwise indicated by the Contractor in writing, prior to award, and in accordance with the EVALUATION (SHIPS’ BUNKERS) provision, product offered shall be required to fully meet the applicable specifications. The supplier shall provide to the receiving vessel a “Statutory Sample” of at least 400-milliters in volume, taken from the receiving vessel’s inlet bunker manifold, together with a Bunker Delivery Note (BDN). This sample will be sealed and carry a sample tag that provides the documentation required per MARPOL 73/78 Annex VI Regulation 18.

MEREDITH.MICHAEL.E.1290973453 Digitally signed by MEREDITH.MICHAEL.E.1290973453 Date: 2016.12.22 15:20:14 -05'00'

BANISZEWSKI.DANIEL.J.1287388698 Digitally signed by BANISZEWSKI.DANIEL.J.1287388698 Date: 2016.12.28 09:15:36 -05'00'

SHEPHERD.SANDRA.S.1012568459 Digitally signed by SHEPHERD.SANDRA.S.1012568459 Date: 2016.12.29 09:23:26 -05'00'