Tab_62_SPE4AX-15-R-0005_Aircraft_Assembly_Award_Attachment_3_-_Packaging_Data

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:002148546

SUPPORT,STRUCTURAL

THE FOLLOWING EXCEPTIONS TO DWG: 9-25283 APPLY:

DWG: 9-25283(-8), E.O.# S 83C0001 & 2004C0091, NOTES:1-14

1.,,PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS

AND BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

REFERENCE NUMBER:ZD059

2.,,DELETE REFERENCE TO D2-5000 AND BAC 5005.

3.,,SURFACE TEXTURE PER ASME B46.1 IN LIEU OF BACD 2097.

4.,,DIMENSIONS AND TOLERANCES PER ASME Y14.5.

5.,,7075 ALUMINUM ALLOY FORGING PER SAE AMS-QQ-A-367 ALUMINUM ALLOY

FORGINGS IN LIEU OF QQ-A-367.

6.,,INSPECT FOR MECHANICAL PROPERTIES PER BMS 7-186 IN LIEU OF BAC

D-10875.

7.,,OPTIONAL TO OMIT RAISED LETTERING. OMIT REFERENCE TO THE WORD

"BOEING".

8.,,OPTIONAL TO PENETRANT INSPECT PER ASTM E1417 IN LIEU OF BAC 5423.

9.,,FINISH CODE F-2.10 DEFINED: APPLY NO FINISH, EXCEPT THAT TEMPORARY

PROTECTION MAY BE APPLIED FOR TRANSPORTATION, HANDLING, AND STORAGE.

10.,,FINISH CODE F-2.30 DEFINED: CHEMICAL TREAT ACCORDING TO

MIL-DTL-5541, CLASS 1A OR ANODIZE ACCORDING TO MIL-A-8625, TYPE I OR IC

(PREFERRED), CLASS 1. APPLY MIL-PRF-23377, TYPE I, CLASS C2 PRIMER TO A

DRY FILM THICKNESS OF 0.0003 TO 0.0005 INCH ACCORDING TO THE

MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264.

11.,,DELETE REFERENCE TO ".203 (.228/.203) DIA HOLE (2 PLACES) MX839.

12.,,SHOT PEEN PER SAE AMS 2430. THE LENGTH OF MACHINED PART MUST BE

PARALLEL TO THE LONGITUDINAL GRAIIN DIRECTION OF THE FORGED BILLET.

13.,,WHEN X'ED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE TO

THIS PRODUCT ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: An item, which requires special manufacturing processes, controls, and testing of material or end items.

Because of its use or application, failure to maintain the highest reliability of such an item could be catastrophic resulting in loss of life or serious injury, loss of a weapon system or extensive secondary damage, with direct impact on the capability to respond to a national emergency or to achieve wartime sustainability.

(B) CRITICAL CHARACTERISTICS: Characteristics which, when defective, are likely to result in hazardous or unsafe conditions for individuals using, maintaining or depending upon the product; or, are likely to prevent performance of the tactical function of a major end item such as an aircraft, missile, space vehicle, engine or a major part thereof.

(Derived from MIL-STD-1916).

(C) MAJOR CHARACTERISTICS: Characteristics (other than critical or minor), which, when defective, are likely to result in failure or to reduce the usability of the product or a major end item for its intended purpose. (Derived from MIL-STD-1916).

(D) MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required

(E) COMPLEX: Items having quality characteristics not wholly visible (hidden characteristics), in the end product for which contractual conformance must be established progressively through precise measurements, tests or controls applied during purchasing, manufacturing, performance, assembly and functional operation either as an individual item or in conjunction with other items [FAR SUBPART 46.203(b)].

(F). COMMERCIAL: Described in commercial catalogs, drawings or industrial standards [FAR SUBPART 46.203(a), (1)].

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS X'ED BELOW):

__X__,, Engineering critical in application.

______ Critical characteristics.

__X___ Major characteristics.

__X___ Minor characteristics, all except critical and major.

______ Complex.

______ Available as a commercial product.

14.,,When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation.

Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes. Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity.

Lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein.

Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel.

When prime design source specifications require or provide for participation by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the cognizant government contract administration office or this procuring activity for assistance.

The contractor is responsible for assuring that all dimensions, conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by themselves and their suppliers. This requirement applies to all characteristics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such.

PROCESS DATA REQUIREMENTS (X'ED WHEN APPLICABLE)

____Prior to beginning of manufacture, the contractor will notify the engineering office of this procuring activity of all manufacturing process and processing procedures intended for use in production of this product. Once these processes are established, no changes shall be made without prior approval of the engineering office of this procuring activity.

SERIALIZATION OF PARTS (X'ED WHEN APPLICABLE)

_____Serialization of each part/assembly (contract end item) is required.

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZD071

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD080

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 81205 9-25283

REVISION NR E DTD 08/29/1960

PART PIECE NUMBER: 9-25283-8

IAW REFERENCE DRAWING NR 81205 BAC5423

REVISION NR W DTD 09/15/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 9-25283

REVISION NR E DTD 12/08/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 06/22/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 12/05/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS7-186M

REVISION NR M DTD 05/16/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BSS7015

REVISION NR DTD 01/31/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BSS7015

REVISION NR DTD 10/25/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5423

REVISION NR W DTD 09/02/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 06/23/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

NSN:002499192

COVER,ACCESS

DRAWING EXCEPTIONS:

1. DOCUMENT 200415485 ENGINEERING NOTES 1,3,7 & 12 APPLY.

2.SPARES CONFIGURATION: PER DRAWING EXCEPT (38).196 DIA AND (2) .281 DIA

ATTACH HOLES OMITTED.

3.1/4" EXCESS TRIM ON ALL SIDES.

4.PER PROCESS SPEC: 68A900000 E0:2015C0002-R DATED:30 MARCH 2015.THIS EO

SPECIFIES THE PRIMER THAT IS APPROVED FOR USE ON ALL USAF F-15 AIRCRAFT

SPARED PARTS. THE ONLY PRIMERS CURRENTLY APPROVED FOR USE ON USAF

F-15C/D/E SPARED PARTS THAT ARE NOT FUEL WETTED ARE DEFT PPG 02GN084 AND

DEFT PPG 02GN093 NON-CHROME CORROSION INHIBITING POLYAMIDE PRIMERS. SEE

PARAGRAPH 3.6.9.1 OF THE FINISH SPEC FOR THE REQUIRED COATING FOR FUEL

WETTED PARTS.

CRITICAL APPLICATION ITEM:

REFERENCE NUMBER:A0003

HIGHER LEVEL CONTRACT QUALITY REQUIREMENT (MANUFACTURERS)

REFERENCE NUMBER:ZD059

GOVERNMENT FIRST ARTICLE TESTING REQUIREMENTS:

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD080

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 76301 68A230075

REVISION NR D DTD 06/06/1997

PART PIECE NUMBER: 68A230075-1005

IAW REFERENCE DRAWING NR 76301 68A900029

REVISION NR H DTD 10/08/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900029

REVISION NR H DTD 07/16/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A230075

REVISION NR D DTD 06/24/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 40M114

REVISION NR M DTD 07/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009998

REVISION NR C DTD 06/27/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-1

REVISION NR H DTD 04/30/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-10

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-11

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-2

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-231

REVISION NR D DTD 05/11/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-232

REVISION NR D DTD 05/11/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-3

REVISION NR D DTD 05/20/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-4

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-5

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-6

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-7

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-8

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-9

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.15500

REVISION NR W1 DTD 03/16/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.15500.4

REVISION NR A DTD 07/08/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 05/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.14007

REVISION NR AB DTD 12/14/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.15500

REVISION NR W DTD 07/30/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-233

REVISION NR G DTD 08/29/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-268

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-272

REVISION NR D DTD 05/20/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-276

REVISION NR D DTD 05/11/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A239998-277

REVISION NR D DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009998

REVISION NR C DTD 01/22/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.19000

REVISION NR W1 DTD 06/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.13201

REVISION NR AK DTD 01/20/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20006

REVISION NR 18 DTD 11/07/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20006

REVISION NR R DTD 02/06/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 11/07/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR C DTD 09/05/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.19000

REVISION NR W DTD 01/23/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 01/23/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.13201

REVISION NR AK DTD 01/23/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 03/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 1MA100

REVISION NR AF DTD 08/30/2006

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:002749846

COVER, ACCESS, AIRCRAFT

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZD059

EXCEPTIONS TO DWG 68A480901:

1. FINISH: PER B/P

2. SPARES CONFIG: PER B/P EXCEPT ADD 1/4" EXCESS TRIM, AND (1) .500 DIA

HOLE OMITTED.

3.DRAWING NOTES 1, 3, 10, AND 12 APPLY

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:Q0070

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD080

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 76301 68A480901

REVISION NR B DTD 11/07/1980

PART PIECE NUMBER: 68A480901-2007

IAW REFERENCE DRAWING NR 76301 P.S.15500.4

REVISION NR A DTD 07/08/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 05/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009995

REVISION NR P DTD 10/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009995

REVISION NR P DTD 06/27/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.15500

REVISION NR W DTD 07/30/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1

REVISION NR H DTD 04/30/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-931

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-932

REVISION NR C DTD 05/17/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-933

REVISION NR E DTD 05/12/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-934

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-935

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-936

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-937

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-938

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-939

REVISION NR C DTD 05/14/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-945

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-946

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-947

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-948

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-949

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-950

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-951

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-952

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 04/21/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-10

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-11

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-2

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-3

REVISION NR C DTD 05/19/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-4

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-5

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-6

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-7

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-8

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-9

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A480901

REVISION NR B DTD 05/13/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A480901

REVISION NR B DTD 05/13/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 ST3M454

REVISION NR AD DTD 06/19/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.23041

REVISION NR V DTD 02/24/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.23041

REVISION NR V1 DTD 06/05/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20006

REVISION NR R DTD 02/06/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 11/07/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M1 DTD 03/15/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 01/23/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 03/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 08/14/2008

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:002838343

FAIRING,AIRCRAFT

REFERENCE NUMBER:ZD080

DRAWING EXCEPTIONS:

1. DOCUMENT 200415485 NOTES 1,3,10,11 & 12 APPLY.

2. OMIT ALL "MATE WITH" HOLES.

3. FINISH: NO PAINT REQUIRED.

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZD059

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:Q0070

EXPORT CONTROL APPLIES

REFERENCE NUMBER:CS001

SAMPLING:

MYLAR INFO:

REFERENCE NUMBER:ZD057

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 76301 68A335100

REVISION NR V DTD 06/20/2014

PART PIECE NUMBER: 68A335100-2153

IAW REFERENCE DRAWING NR 76301 40M114

REVISION NR M DTD 07/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009998

REVISION NR C DTD 06/27/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 05/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 6M39

REVISION NR AA DTD 06/19/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.14017

REVISION NR V DTD 10/23/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 04/21/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009998

REVISION NR C DTD 10/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.14017

REVISION NR V1 DTD 05/23/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-10

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1004

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1005

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1006

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1007

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1008

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1009

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1010

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1011

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1012

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1013

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1014

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1015

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1020

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1021

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1022

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1023

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1024

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1025

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1026

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1027

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1028

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1029

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1030

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1031

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1053

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1054

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1055

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1056

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1057

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1058

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1059

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1060

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1061

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1067

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1068

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1069

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1070

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1071

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1072

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1073

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1074

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1075

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-1076

REVISION NR C DTD 09/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-11

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-2

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-3

REVISION NR C DTD 05/19/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-4

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-5

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-6

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-7

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-8

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A339998-9

REVISION NR C DTD 05/08/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20006

REVISION NR R DTD 02/06/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 11/07/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100/3

REVISION NR K DTD 10/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100/4

REVISION NR W DTD 05/19/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR C DTD 09/05/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100/5

REVISION NR P DTD 10/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M1 DTD 03/15/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.19000

REVISION NR W DTD 01/23/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 01/23/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 03/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100/2

REVISION NR T DTD 10/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100

REVISION NR W DTD 01/21/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100

REVISION NR W DTD 03/20/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A335100

REVISION NR W DTD 03/20/2015

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:003617241

SKIN, AIRCRAFT

REFERENCE NUMBER:ZD071

REFERENCE NUMBER:ZD059

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:Q0070

FAT ADDRESS:

SEND FIRST ARTICLE TEST SAMPLES TO:

DODAAC FS2060

SPECIAL HANDLING UNIT, FIRST ARTICLE UNIT

455 BYRON STREET

ROBINS AFB, GA 31098-1887

MARK FOR: FIRST ARTICLE INSPECTION AND TEST.

DO NOT POST.

DWG EXCEPTIONS & ENGINEERING NOTES:

1. DOCUMENT 200415485 NOTES 1,3,10,11 & 12 APPLY.

2. FINISH: WHEN THE BLUEPRINT CALLS OUT ALUMINUM ALLOYS 2XXX -7XXX, USE

MIL-DTL-5541 FOR SURFACE PREPARATION (CHROMATE CONVERSION), FOLLOWED BY

2 COATS MIL-PRF-23377, TYPE I, CLS C2 (EPOXY PRIMER) FOR NON-FUEL WETTED

SURFACES AND SAE AMS-C-27725 (POLYURETHANE PRIMER) FOR FUEL WETTED

SURFACES. ALL OTHER SURFACE COATINGS WILL BE PER BLUEPRINT.

3. OMIT "MATE WITH" HOLES.

4. SUPPLY PART WITH .250" EXCESS TRIM ON ALL SIDES.

EXPORT CONTROL APPLIES:

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 76301 68A327180

REVISION NR B DTD 08/06/1984

PART PIECE NUMBER: 68A327180-2008

IAW REFERENCE DRAWING NR 76301 68A900001

REVISION NR P DTD 04/03/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 40M114

REVISION NR M DTD 07/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009998

REVISION NR C DTD 06/27/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A327180

REVISION NR B DTD 09/25/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 05/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 04/21/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1

REVISION NR H DTD 04/30/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-10

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-11

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-12

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1673

REVISION NR D DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1677

REVISION NR D DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1678

REVISION NR D DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1679

REVISION NR D DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1680

REVISION NR D DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1683

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1684

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1685

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1686

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1689

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1690

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1691

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1692

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1695

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1696

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1697

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1698

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1701

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1702

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1703

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1704

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1707

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1708

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1709

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1710

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1713

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1714

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1715

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1716

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1719

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1720

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1721

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1722

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1725

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1726

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-1727

REVISION NR D DTD 06/23/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-2

REVISION NR D DTD 03/22/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-3

REVISION NR D DTD 02/26/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-4

REVISION NR D DTD 05/20/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-5

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-6

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-7

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-8

REVISION NR D DTD 05/06/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A329998-9

REVISION NR D DTD 05/07/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A009998

REVISION NR C DTD 10/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.13201

REVISION NR AK DTD 01/20/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20006

REVISION NR R DTD 02/06/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 11/07/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR C DTD 09/05/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M1 DTD 03/15/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A327180

REVISION NR B DTD 08/22/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.16001

REVISION NR CA DTD 01/23/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.13201

REVISION NR AK DTD 01/23/1991

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 68A900000

REVISION NR K DTD 07/22/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.20022

REVISION NR M DTD 08/14/2008

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:XX

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:D3 OPI:M

INTRMDTE CONT:XX INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

NSN:007779173

BRIDGE ASSEMBLY,FAN

EXCEPTIONS AND ENGINEERING NOTES ATTACHED AS DWG 007779173-15316

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZD071

REFERENCE NUMBER:ZD059

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:ZAQMS

REFERENCE NUMBER:ZANAD

IAW BASIC DRAWING NR 81205 35-10738

REVISION NR G DTD 10/15/1962

PART PIECE NUMBER: 35-10738-2

IAW REFERENCE DRAWING NR 81205 BACD2032

REVISION NR B DTD 08/21/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 39-10776

REVISION NR C DTD 12/19/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 08/08/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 01/17/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5049

REVISION NR H DTD 05/24/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5049

REVISION NR H DTD 05/20/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 06/22/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 12/05/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 35-10738/1

REVISION NR G DTD 10/15/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 06/23/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 05/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 03/04/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 13873 007779173-15316

REVISION NR DTD 11/12/2015

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:007788301

ANGLE,INNER ENGINE

SEE BIDSET FOR ENGINEERING INSTRUCTIONS

FOR THIS NSN

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZD071

REFERENCE NUMBER:ZD059

REFERENCE NUMBER:A1209

A COMPLETE TECH DATA PKG/BIDSET EXISTS,BUT

IS EXPORT CONTROLLED

SAMPLING:

10242 digital mylar project completed.gsm5071

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 82918 35-8270

REVISION NR P DTD 12/02/1980

PART PIECE NUMBER: 35-8270-36

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR N DTD 08/22/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1639

REVISION NR J DTD 06/22/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BSPS-13-002

REVISION NR DTD 04/06/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 35-8270

REVISION NR P DTD 06/30/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1431

REVISION NR J DTD 05/18/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1431

REVISION NR J DTD 10/19/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1514-1465

REVISION NR BB DTD 03/13/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1639/3

REVISION NR H DTD 04/01/1960

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR N DTD 06/13/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR L DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR L DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR A DTD 05/07/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR A DTD 02/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1639/4

REVISION NR J DTD 07/14/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 13873 007788301-07155

REVISION NR DTD 06/04/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1431/6

REVISION NR J DTD 10/19/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1431/8

REVISION NR G DTD 05/17/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1431/2

REVISION NR F DTD 07/24/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1639/2

REVISION NR F DTD 07/14/1961

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:007879706

SKIN,AIRCRAFT

Refer to Contract Data Requirements List (CDRL) for additional information (form DSCR 1423-1).

REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND

DOCUMENTS: THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305

AND OR L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE

PROCESSES AND OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS,

SPECIFICATIONS AND DOCUMENTS.

THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH

MIL SPEC,MIL STD,INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE DATE

OF THIS CONTRACT UNLESS OTHERWISE NOTED.

1. PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND

BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748),ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

2. DELETE REFERENCE TO 2-5000 OR D2-5000 AND BAC 5005

3. DIMENSIONS AND TOLERANCES PER ASME Y14.5M IN LIEU OF MIL-STD-8 / ANSI

Y14.5

4. USE SAE AMS 4048 ALUMINUM ALLOY ALCLAD 7075 PLATE/SHEET IN LIEU OF

QQ-A-287,

5. ADD 0.50 INCH EXCESS TRIM ALLOWANCE TO ALL EXTERIOR EDGES OF PANEL

6. PART TO BE FURNISHED WITHOUT FASTENER HOLES EXCEPT THOSE REQUIRED FOR

MANUFACTURE

7. HEAT TREAT ALUMINUM ALLOY PER SAE AMS 2770 AND SAE AMS 2772 IN LIEU

OF BAC5602 AND MIL-H-6088

8. FINISH CODE F-2.130 DEFINED: CHEMICAL TREAT SKINS ACCORDING TO

MIL-DTL-5541, CLASS 3. TO THE INTERIOR SURFACES, APPLY MIL-PRF-23377,

TYPE I, CLASS C2 PRIMER TO A DRY FILM THICKNESS OF 0.0003 TO 0.0005 INCH

ACCORDING TO THE MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264.

9. DEFINITIONS APPLICABLE TO THIS PRODUCT ARE OR HAVE:

MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required.

10. When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation.

Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes. Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity.

Lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein.

Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel.

When prime design source specifications require or provide for participation by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity.