Attachment 2 NSN 8120-015259001.pdf

Attachment #2

NSN: 8120-015259001

CYLINDER, COMPRESSED GAS

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF

TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/O ers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE

MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT

INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

TREATMENT AND PAINTING OF CYLINDERS SHALL BE BY

ANY METHOD/SYSTEM THAT WILL PROVIDE A FINISH

THAT WILL MEET THE REQUIREMENTS OF COMPRESSED

GAS ASSOCIATION TB-17-2000. TESTS 1, 3, 5, 6

AND 8 APPLY.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1

OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE

CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE

PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE

ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY.

UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL- STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO

NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT

CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

EMPTY CYLINDER

1.1.1.3.3.3-HEXAFLUOROPROPANE, HFC 236FA

DOT: 4BA300 OR 4BW300 VIRGIN PRODUCT

THE FOLLOWING EXCEPTION IS TAKEN TO A-A-59666: TABLE I, USE CLASS CODE P1 FOR SIZE ONLY. 12.250 IN. O.D. BY 36.0 IN. HGT., 122 LB WATER CAP., 150 LB PRODUCT CAP. WITH FLANGE AND VALVE PROTECTION CAP 3/4-14NGT INLET THD 3 1/8-11UNS-1 VALVE CAP THD WITH DUAL

CONTROL DUAL PORT VALVE.

VALVE NSN: 8120-01-204-0182. VALVE SHALL BE FITTED WITH A 3/8 IN BY 33 IN POLYPROPYLENE EDUCTION TUBE AND CLAMP, WITH THE BOTTOM OF THE TUBE CUT AT TWO 45 DEGREE ANGLES.

FILLED CYLINDER NSN: 6830-01-525-9381.

TREATMENT AND PAINTING: COLOR CODE AND STENCIL PER MIL STD 101B. COLOR ORANGE FOR

REFRIGERANT, STENCIL WITH "1.1.1.3.3.3 HEXAFLUOROPROPANE" ON EACH SIDE OF THE

CYLINDER.