SPE3SE25Q0203 Equipment List.pdf

1 2 ea DISHWASHER, FLIGHT TYPE Stero Model No. STPCW‐ER3T Stero Flight Type Dish Machine, three‐tank, (power scrapper, power wash, power rinse sections), 31x20” tunnel opening, variable speed 31" W conveyor belt (0 ‐ 9.2 fpm), Auto Fill, Kit 55 (pressure reducing valve, shock arrestor, and pressure gauge in final rinse), cold water AquaStat, door safety switches, top‐mount control panel, auto shut‐down, common plumbing connection (including drain), final rinse saver, (2) stainless steel vent cowls (ducts to ceiling by others), welded stainless steel frame, NSF

2 ea 1 year parts & labor warranty, standard 2 ea DIR0LR Left To Right Operation 2 ea ELE0CD 480v/60/3‐ph 2 ea Without Heat Recovery 2 ea ECNMNT Mounted Circuit Breakers, for each motor 2 ea HTEELE Electric Tank Heat 2 ea STPCWER3T‐BST024 Booster Heater, electric, 24kW 2 ea DRY0NO No Blower Dryer 2 ea DRH036 Drying Hood with Vent, 36" length 2 ea UNL096 Unload Section, 96" 2 ea UNLSTD Unload Section ‐ No Split 2 ea Overall Machine length: 22 feet total length 2 ea STPCWER3T‐FRC098 98 gallons per hour final rinse consumption 2 ea BLT002 Banquet Style, with Cross Rods every 4th row 2 ea CTR132 132” Main Section (44” Power Scrapper, 44” Power Wash, 44” Power Rinse) 2 ea CTRSTD Main Section ‐ no split 2 ea LDS036 Load Section, 36" 2 ea PMPFRT Front Accessible Pumps 2 ea DOROFF Lift‐Off Style Doors 2 ea VNTL09 Vent Hood, 9", standard 2 ea FETFLG Flanged Feet, Set Of 8 2 kt DWT0NO Without Drain Water Tempering Kit 2 ea SEC0NO No Security Package 2 kt HOS0NO Without Hose Kit 2 ea NSST‐DRNTEE Tee in drain line 90" from load end. Tee to face rear of machine.

Verify tee location

TO BE INSTALLED AT MESS HALL 3120

ITEM TOTAL:

CAMP PENDLETON ‐ MH 31 (2) STERO

& (2) TRAGENFLEX CAMP PENDLETON FOOD SVS Page 2 of 6

Item Qty Description Sell TotalSell

2 2 ea ASSEMBLY Stero Model No. ASSEMBLY

FORMAL ASSEMBLY MUST BE PERFORMED BY STERO AUTHORIZED

REP, IN ORDER FOR STERO TO HONOR A STANDARD WARRANTY

ITEM TOTAL:

3 1 ea CONVEYOR

Tragenflex Model No. CONVEYOR PER DRAWINGS #J234286‐01 Rev. A Standalone tray accumulator to include:

A ‐ (02) Window frame & sill B ‐ (02) Sight & sound baffle w/ LED tube lights C ‐ Stainless steel panel D ‐ (02) Rotary tray accumulators:

‐ Stainless steel carriers ‐ Electrical control panel ‐ Accumulation photo sensors

E ‐ Soiled dish table:

‐ (02) Waste troughs ‐ (02) Magnetic silver savers ‐ (06) Pre rinse stations ‐ (06) Perforated s/s ledges ‐ (02) Remote start/stop stations ‐ (04) Gusher Heads ‐ (02) End Gushers

F: (02) Hose clean up stations G: (02) Salvarjor Waste Collector S419

FOR MESS HALL 3120

ITEM TOTAL:

& (2) TRAGENFLEX CAMP PENDLETON FOOD SVS Page 3 of 6

4 1 ea ASSEMBLY Tragenflex Model No. ASSEMBLY TragenFlex Factory Technician will arrive at jobsite to field weld, polish and interconnect TragenFlexequipment. This covers all inter electrical and plumbing connections of TragenFlex components only.

Please be advised that all TragenFlex equipment MUST be assembled by TragenFlex Technician(s) or an TragenFlex authorized service agent. Warranty is void if assembled by an unauthorized service agent.

Please note this Assembly does not include:

Receive, uncrate, unload and delivery of equipment to dishroom Electrical and plumbing connection from and to building.

Utility service connections of accessory equipment to TragenFlex equipment such as waste equipment or dishmachine.

Unless specified in our quotation, removal and/or disposal of existing equipment are not included.

FOR MESS HALL 3120

ITEM TOTAL:

& (2) TRAGENFLEX CAMP PENDLETON FOOD SVS Page 4 of 6

Total

5 1 ea INSTALLATION ALL TRADES Model No. INSTALL

INSTALLATION SERVICES FOR ALL EQUIPMENT QUOTE FOR MESS

HALL 3120:

*Secure and disconnect all utilities to existing Dish Machine, Accumulator, and Scraping system. Utilities to include: Electrical, water, drains, exhaust duct, and steam lines.

*Disassemble accumulator, dish machine, and fast rack system and transport to main warehouse. Off Site Formal disposal by others.

*Receive and inspect at warehouse new equipment for any damage.

*Transport all new equipment from the warehouse to the building where install will take place.

*Uncrate set in place new FT dish machine, accumulator with scraping system, and waste collector.

*Assist with Assembly requirements for new equipment, per manufacturer's specs.

*Provide and install new water lines from existing shut off valves with‐in the room to new dish machine, accumulator, scraping system, and waste collector.

*Provide and install new drain lines from dish machine, accumulator, scraping system, and waste collector. All drain lines to be ran in copper. No plastic.

*Provide and install new stainless steel duct fitting from the existing exhaust duct to the new machine.

*Modify as needed, and install electrical circuits to the new dish machine, accumulator, and collector.

*Start up and test all new equipment for proper operation.

*Removal and installation to be done after hours so not to disrupt normal business.

Chemical system by others

ITEM TOTAL:

NEW CUSTOMERS FOR NON‐GOVERNMENT PURCHASE ORDERS:

& (2) TRAGENFLEX CAMP PENDLETON FOOD SVS Page 5 of 6