SPBN253104_Install Speed Bumps.pdf

PDF 155 KB Posted

Attached to
ITB TRD02 Asphalt Paving SPBN253104 Install Speed Bumps (Otis ANGB)
Solicitation number
BD-26-1069-MILDV-40000-120013
Issued by
Barnstable County, Massachusetts

About this file

This is a Request for Proposal (RFP) memorandum from the 102d Intelligence Wing of the Department of the Air Force, located at Otis Air National Guard Base in Massachusetts, seeking a contractor to install asphalt speed bumps at the Gibbons Gate. The project involves installing speed bumps in three specific locations, with detailed specifications for the installation process, including saw-cutting and removing existing asphalt, preparing the sub-grade, applying tack oil, and installing new asphalt in layers. The speed bumps are to be 4 inches high and 2 feet 6 inches in depth, spanning the full width of the roadway, and must be capable of supporting heavy truck loads.

The contractor's proposal must include all associated costs for materials, labor, equipment, transportation, storage, and overhead. The project will follow the Department of Defense's Unified Facilities Criteria (UFC) and adhere to State, Federal, and local installation codes, with UFC guidance taking precedence in case of conflicting standards. Pavement requirements will be based on UFC 3-201-02 and local Department of Transportation regulations. Interested contractors can direct any questions to Maj Vincent J. Tripodi via email or telephone, with the proposal focused on a base bid for speed bump installation at the specified location.

View the file

Other files

Show all 12

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF THE AIR FORCE

1 0 2 D INTELLIGEN CE WI N G (ACC )

OTIS AIR N ATION AL GUARD B ASE MASSACH USETTS

23 July 2025

MEMORANDUM FOR MS. MICHAELA A. KOCHKA

FROM: 102d CES/BCE

SUBJECT: REQUEST FOR PROPOSAL, SPBN253104, INSTALL SPEED BUMPS

1. The 102d Intelligence Wing (IW) has a need for vehicle speed measures at the Gibbons Gate. The purpose of this memorandum is to request a proposal to install asphalt speed bumps in 3 locations.

Details will be specified below.

2. The Department of Defense (DoD) utilizes the Unified Facilities Criteria (UFC) as its building code, which refers to the latest version of the IBC. In addition to UFC guidance, the contractor shall adhere to all State, Federal, and local installation codes. Where State and Federal code differ from UFC guidance, the UFC shall be the standard followed. UFC guidance can be found at the following website:

https://www.wbdg.org/dod/ufc

3. For pavement requirements, refer to Attachment 1, UFC 3-201-02, Civil Engineering, Section 4-1, dated 20 December 2022. This UFC refers the contractors to local DOT regulations.

4. The contractor proposal shall include all cost associated with material, labor, equipment, transportation, storage, GAOH, and any other items necessary to provide the following:

a. Base Bid: Install Asphalt Speed Bumps

i. The contractor shall perform the following:

1. Properly mark areas of installation.

2. Saw-cut, remove and dispose of existing asphalt in area of addition.

Disposal shall be off-site.

3. Install Speed Bumps in areas shown on Attachment 2, Speed Bump Locations.

a. Ensure sub-grade is compact and ready for new asphalt.

b. Tack oil or other methods of bonding shall be utilized to ensure the non-separation of the new pavement.

c. Install new asphalt in lifts, properly shaping and tamping as required.

i. Compact and tamp asphalt to ensure it is even with the surrounding road.

d. Form speed hump to be 4” high x 2’-6” in depth spanning the width of the roadway.

e. Perform necessary actions to allow for proper cooling and curing of new asphalt.

f. NOTE: Asphalt frequently receives large trucks; asphalt should be capable of carrying heavy loads.

5. Direct any questions or concerns regarding this memorandum to Maj Vincent J. Tripodi by email at vincent.tripodi.1@us.af.mil or by telephone at 508-968-4238.

VINCENT J. TRIPODI, Maj, USAF Base Civil Engineer

Distribution:

1. Ms. Michaela Kochka, State KO

Attachments:

1. Attachment 1, UFC 3-201-02

2. Attachment 2, Speed Bump Locations

2025-07-24T14:44:37-0400
TRIPODI.VINCENT.JOSEPH.1256562266

File details come from the government source that posted it. Updated .