specs redacted.pdf

Installation Specifi cations

Power Requirement

USA/Canada 115 Vac ± 10% (60 Hz) International 230 Vac ± 10% (50 Hz) Japan 100 Vac ± 10% (50/60 Hz) 200 Vac ± 10% (50/60 Hz) In all cases dedicated circuit is recommended

Electrical Receptacle

USA/Canada Standard Single Phase, 15 Amp Receptacle NEMA 5-15R

International Standard Single Phase, 10 Amp Receptacle

Japan 100 Vac Standard Single Phase, 15 Amp Receptacle 200 Vac Standard Single Phase, 10 Amp Receptacle

Specifi cations

Printer Speed

Fold Accuracy Exceeds industry standards including DIN 824 specifi cations

Print Width Minimum 8½” (216 mm) Maximum 36” (914 mm)

Maximum Print Length Base Model (accordion fold only)

14’ or 14 panels x selected accordion panel width

Maximum Crossfoldable Print Length

14’ or 14 panels x selected accordion panel width Maximum lengths given here assume 20 lb (75 gsm) media Heavier weights may limit capacity

Media Weights 18 lb to 22 lb bond (67.5 to 82.5 gsm)

Accordion Folds Choice of panel widths: 7½”, 8½”, 9”, 12”, 105 mm, 170 mm, 190 mm, 210 mm, 297 mm

Packet Folds

Choice of portrait (C- or Z-fold) or landscape (C-fold only):

ANSI packet dimensions: 8½” x 11” Architectural packet dimensions: 9” x 12” Metric (ISO) packet dimensions: 210 mm x 297 mm Custom fold packet sizes available

Book Folds Choice of binding edge from ½” to 2” in ¼” increments (metric choices: 20, 30 or 40 mm)

Communications Interface Tameran vivacé for Printfold Printfold Folder Interface Xerox General Folder Interface (GFI) for AccXES Controllers

Off -Line Folding Manual infeed feature allows off -line fl at sheet folding

Flat Sheet Stacker (Optional)

Option 1: Unfolded prints exit back of folder and stack on extendable (detachable) wire-form rack-approximately 100 sheet capacity Option 2: SureStak 300 - up tp 300 sheet capacity Option 3: SureStak 1000 - up to 1,000 sheet capacity

Extended Length-Fan Fold (Optional on Some Models)

30’ or 30 panels x selected accordion panel width [Example: with 8½” (216mm) panels, maximum length is 30’x 8½” = 255” (645 cm)]

Automatic Turner for A–C Size Prints (Optional on Some Models)

Rotates A–C size prints when necessary for the folder to properly handle the documents.

(Used when printers have roll capacity or paper feed limitations.)

Folded Sheet Stack Tray (Optional on Some Models) Approximately 40 E-size (A0) folded prints

Mid-Volume Exit Conveyor (Optional on Some Models) Stacks up to 100 E-size (A0) folded prints

High Volume Exit Conveyor (Optional on Some Models) Stacks up to 200 E-size (A0) folded prints

Printfold 2500 On-Line Wide Format Folder

Technical Data