SP4708-15-R-0001-0011.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE F PAGES

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

O

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting and Appropriation Data (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(X) A. (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN

THE CONTRACT ORDER NO. IN ITEM 10A.

B. VE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES ( such as changes in paying office, appropriation date, etc .) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. REEMENT IS ENTERED INTO

PURSUANT TO AUTHORITY OF:

D. HER (Specify type of modification and authority)

THIS CHANGE ORDER IS ISSUED PURSUANT TO:

THE ABO

THIS SUPPLEMENTAL AG

OT

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF SIGNER (Type or print)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

BY

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

SOLICITATION NUMBER: SP4708-15-R-0001, AMENDMENT 0011, “REFRESH NO. 4”

TABLE OF CONTENTS

A. CONTINUATION OF STANDARD FORM 1449

A.1. Block 8

A.2. Block 9

A.3. Block 17a

A.4. Block 17b

A.5. Block 18b

A.6. Blocks 19-24 – Schedule of Supplies/Services

A.6.1. General Information

A.6.2. Supplies

A.6.3. Excluded Items

B. CAUTION NOTICES

B.14. CONTRACTOR CODE OF BUSINESS ETHICS (DEC 2010)

B.15. Next Generation e-Commerce Solution (NGe-Com)

C. CONTRACT CLAUSES

FAR 52.212-4, Contract Terms and Conditions—Commercial Items (MAY 2015)

Addendum to FAR 52.212-4

DFARS 252.203-7999 Prohibition on Contracting with Entities that Require Certain Internal

Confidentiality Agreements (DEVIATION 2015-O0010)(FEB 2015)

DLAD 52.212-9001 Application of Fast Payment to Part 12 Acquisitions (NOV 2011)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—

Commercial Items (MAR 2016) ............................................................ Error! Bookmark not defined.

FAR 52.211-16 Variation in Quantity (APR 1984)

DLAD 52.211-9023 Substitution of Item after Award (NOV 2011)

FAR 52.216-19 Order Limitations (OCT 1995)

FAR 52.216-22 Indefinite Quantity (OCT 1995)

DFARS 252.216-7006 Ordering (May 2011)

DLAD 52.216-9006 Addition/Deletion of Items. (AUG 2005)

DLAD 52.216-9085 Economic Price Adjustment – DLA Multiple Award Schedule Contract (OCT

2015)

FAR 52.217-9 Option to Extend the Term of the Contract (MAR 2000)

DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions (MAY 2013)

FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998)

D. STATEMENT OF WORK

D.1. Overview

D.2. Electronic Commerce (eCommerce) Requirements

D.2.1. External Certificate Authority (ECA) Certificate

D.2.2. Order Transmission Types

D.3. DOD EMALL Supplier Catalog Management

D.3.1. Definitions

D.3.2. Supplier Catalogs

D.3.3. DOD EMALL Catalog Loader Template and Instructions

D.3.4. AbilityOne Program

D.3.5. Catalog Change Requests

D.4. Ordering Procedures

D.5. Delivery

D.6. Preservation, Packaging, Packing, Labeling and Marking (PPPL&M)

D.6.1. Commercial Packaging IAW ASTM D3951 is acceptable for customer direct shipments to

CONUS destinations

D.7. Invoicing and Payment

D.7.3. Wide Area Work Flow (WAWF)

D.7.4. Invoice Payment

D.8. Customer Service Requirements

D.9. Contract Administration Data

D.9.2. Performance Metrics

D.10. Special Terms and Conditions

D.11. Attachments

E. SOLICITATION PROVISIONS

FAR 52.212-1, Instructions to Offerors—Commercial Items (OCT 2015)

Addendum to FAR 52.212-1

EVALUATION OF PROPOSALS

FAR 52.212-3 Offeror Representations and Certifications -- Commercial Items (MAR 2016)

DFARS 252.225-7000 Buy American--Balance of Payments Program Certificate (NOV 2014) ... 80

DFARS 252.225-7020 Trade Agreements Certificate—Basic (NOV 2014)

DFARS 252.225-7018 Photovoltaic Devices—Certificate (JAN 2016)

FAR 52.203-2 Certificate of Independent Price Determination (APR 1985)

FAR 52.209-5 Certification Regarding Responsibility Matters (APR 2010)

FAR 52.209-7 Information Regarding Responsibility Matters (JUL 2013)

FAR 52.215-20 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data, Alternate IV (OCT 2010)

FAR 52.216-1 -- Type of Contract (APR 1984)

FAR 52.233-2 Service of Protest (SEP 2006)

DLAD 52.233-9001 Disputes—Agreement to Use Alternative Dispute Resolution (NOV 2011)

DFARS 252.209-7992 Representation by Corporations Regarding an Unpaid Delinquent Tax

Liability or a Felony Conviction under any Federal Law—Fiscal Year 2015 Appropriations

(DEVIATION 2015-O0005) (DEC 2014)

DFARS 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal

Confidentiality Agreements—Representation (DEVIATION 2015-O0010) (FEB 2015)

FAR 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998)

This page intentionally left blank.

A. CONTINUATION OF STANDARD FORM 1449

A.1. Block 8

Offer Due Date/Local Time: As of the effective date of Amendment 0006, Opening and Closing periods are hereby changed from “Quarterly Last Month Open Periods” to “Semiannual Open Periods”.

“Semiannual Open Periods” will be active for no less than the last 20 business days (excludes

Saturdays, Sundays, and Federal Holidays) of each of the following months: April and October.

The time for the receipt of proposals is hereby established as 3:00 P.M. Eastern Time (ET) on the last business day of each Semiannual Last Month Open Period. This solicitation is for a five-year period. There will be periodic openings and closings throughout the five-year period as depicted in the table below:

YEAR

OPENING

(Date/Month)

CLOSING

(Date/Month)

2015 10 March 09 April

2015 -- --

2015 06 July 14 August

2015 02 October 20 November

2016 -- --

2016 04 April 29 April

2016 -- --

2016 03 October 31 October

2017 -- --

2017 03 April 28 April

2017 -- --

2017 03 October 31 October

2018 -- --

2018 03 April 30 April

2018 -- --

2018 03 October 31 October

2019 -- --

2019 03 April 30 April

2019 -- --

2019 03 October 31 October

This solicitation is a standing solicitation from which the Government contemplates award of contracts for various commercial items (see Section A.6.2.1.). The solicitation will remain in effect five years from the issue date or will be replaced by an updated solicitation, whichever comes first. Offerors are requested to submit complete proposals for all requirements, including all certifications, as specified in this solicitation. Proposals may be submitted at any time during the open periods of the solicitation.

Any proposal not received during a Semiannual Open Period (on or between the Opening Date and its corresponding Closing Date) will not be evaluated and will be returned to the offeror. Federal Holidays

Section A. Continuation of Standard Form 1449 are identified as those established by Federal law (5 U.S.C. 6103) and made available to the public by the Office of Personnel Management thru the following website: http://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/.

A.2. Block 9

› Address and Submit “mailed” offers to:

DLA Troop Support

Post Office Box 56667

Philadelphia, PA 19111-6667

Solicitation Number: SP4708-15-R-0001

Opening/Closing Dates and Time: *__________________________

* Upon proposal submission, the offeror shall specify the “Opening/Closing Dates” using the appropriate “Semiannual Open Period” dates identified in Block 8. The “Time” shall always be depicted as “3:00 P.M./ET”.

› Address and Deliver “hand carried” offers, including delivery by commercial carrier, to:

DLA Troop Support

Business Opportunities Office

Bldg. 36, 2nd Floor, Room 2035

700 Robbins Avenue

Philadelphia, PA 19111-5092

Solicitation Number: SP4708-15-R-0001

Opening/Closing Dates and Time: *__________________________

* Upon proposal submission, the offeror shall specify the “Opening/Closing Dates” using the appropriate “Semiannual Open Period” dates identified in Block 8. The “Time” shall always be depicted as “3:00 P.M./ET”.

Notes: 1. All hand carried offers are to be delivered to the Business Opportunities Office between 8:00 a.m. and

5:00 p.m., Monday through Friday, except for legal federal holidays as set forth in 5 USC 6103. Offerors using a commercial carrier service must ensure that the carrier service “hand carries” the package to the Business Opportunities Office specified above for hand carried offers prior to the scheduled opening/closing time. Package must be plainly marked ON THE

OUTSIDE OF THE COMMERCIAL CARRIER’S ENVELOPE with the solicitation number, date, and time set forth for receipt of offers as indicated in Block 8 of the Standard Form 1449.

2. Examples of “hand carried” offers include: In-person delivery by contractor, Fed Ex, Airborne, UPS, DHL, Emery, other commercial carrier, USPS Express Mail, and USPS Certified Mail.

Initial proposals must be mailed or hand carried to the Business Opportunities Office in accordance with the above instructions. E-mail transmissions are acceptable for discussions and any proposal revisions.

If and when a request for proposal revision is issued, the date and time for receipt of proposal revisions, if applicable, will be designated in that request along with acceptable e-mail address for submissions.

http://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/ http://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/

A.3. Block 17a

› Offeror’s assigned Data Universal Numbering System (DUNS) Number:_______________

(If you do not have a DUNS number, contact the individual identified in Block 7a of the SF 1449 or see 52.212-1, Instructions to Offerors—Commercial Items for information on contacting Dun and

Bradstreet.)

› Offeror’s assigned Contractor and Government Entity (CAGE) Code:__________________

A.4. Block 17b

Remittance Address: (if different from Contractor/Offeror address in block 17a of the SF 1449.)

Note: Payment will be made via Electronic Funds Transfer (EFT) to the contractor’s financial institution. The Government will mail checks to the above address only in the event of an Electronic

Funds Transfer (EFT) failure, pursuant to 52.232-33 (which is incorporated by reference at 52.212-

5(b)). The contractor’s electronic address is:

A.5. Block 18b

Detailed line item invoices will be submitted in accordance with the procedures for Invoicing (Section

B.6.3.) to the Defense Finance and Accounting Service’s (DFAS’s) Wide Area Work Flow (WAWF) system.

A.6. Blocks 19-24 – Schedule of Supplies/Services

A.6.1. General Information

A.6.1.1. This solicitation seeks to establish Indefinite Delivery/Indefinite Quantity (IDIQ)

Multiple Award Schedule (MAS) type contracts for various commercially available off-the-shelf

(COTS) items which will be ordered through the DOD EMALL system for delivery to DOD EMALL customers worldwide. DOD EMALL customers include DoD military and non-military customers, the

Defense Logistics Agency (DLA) acting as or on behalf of the customer, and customers of other

Government entities (including Federal, State, and/or Local).

A.6.1.2. Pricing for all contracts awarded as a result of this solicitation shall be Fixed Price with

Economic Price Adjustment (see DLAD 52.216-9085 Economic Price Adjustment – DLA Multiple

Award Schedule Contract). All delivery orders placed against resultant contracts shall be firm fixed price.

A.6.1.3. The term of the contracts awarded as a result of this solicitation will be a Base Ordering

Period and four (4) Option Ordering Periods (for a total of five (5) periods of performance). Each of these contract periods shall be for one year, unless otherwise specified in the award document. All contracts awarded as a result of this solicitation shall not exceed 60 months (should all option periods be exercised).

A.6.1.4. Indefinite Quantity Contract Limitations

A.6.1.4.1. The maximum quantity of supplies for this acquisition is set at $100 Million (M) based on the aggregated total value of all of the individual IDIQ maximums to be established for each individual contract awarded as a result of this solicitation.

A.6.1.4.2. The guaranteed minimum dollar value that the Government agrees to order during the period of any awarded contract will be $100.00. If the Contractor receives total orders for less than

$100 during the term of the contract, the Government will pay the difference between the amount ordered and $100. The guaranteed minimum covers the entire period of the IDIQ contract (Base Period and all Option Periods, if exercised). The Government is obligated to order only the minimum dollar figure stated above. The guaranteed minimum does not apply if the contract is terminated for cause or if the contract is canceled at the request of the Contractor.

A.6.1.5. All items offered in response to this solicitation must be a “Commercially available off-the-shelf (COTS) item” as defined by FAR 2.101. There are no exceptions to this rule. However, this statement does not prohibit items other than COTS from being added to the DOD EMALL system when awarded under a separate agreement or contract that is not the direct result of this solicitation provided that the separate agreement or contract contains all of the terms and conditions required for DOD

EMALL participation. An offeror does not need to have prior sales of an offered COTS item as long as the offeror can demonstrate that the item is “sold in substantial quantities in the commercial marketplace” (which may include sales by other legal business entities).

A.6.2. Supplies

A.6.2.1. The scope of this solicitation is limited to the following subset of the DLA Managed

Federal Supply Classes (FSCs; also referred to as Product Service Codes (PSCs)) and COTS items matching the FSC description:

A.6.2.1.1. As described in Table A.6.2.1 below, the column titled “Country of Origin

Restrictions” indicates the applicability of the Buy American – Balance of Payments Program (“BA-

BoPP”; see DFARS 252.225-7001); Trade Agreements (“TA”; see DFARS 252.225-7021 and 225.401-

70); or the “Berry Amendment” (“Berry”; see DFARS 225.7002-1, as implemented by 10 U.S.C. 2533a;

see also DFARS 252.225-7012 and DFARS 252.225-7015).

TABLE A.6.2.1

PSC

Country of Origin

Restrictions

SHORT NAME

1080 BA-BoPP CAMOUFLAGE AND DECEPTION EQUIPMENT

1090 BA-BoPP ASSEMBLIES INTERCHANGEABLE BETWEEN WEAPONS IN TWO OR MORE CLASSES

1210 BA-BoPP FIRE CONTROL DIRECTORS

1220 BA-BoPP FIRE CONTROL COMPUTING SIGHTS AND DEVICES

1240 BA-BoPP OPTICAL SIGHTING AND RANGING EQUIPMENT

1250 BA-BoPP FIRE CONTROL STABILIZING MECHANISMS

1260 BA-BoPP FIRE CONTROL DESIGNATING AND INDICATING EQUIPMENT

1265 BA-BoPP FIRE CONTROL TRANSMITTING AND RECEIVING EQUIPMENT, EXCEPT AIRBORNE

1270 BA-BoPP AIRCRAFT GUNNERY FIRE CONTROL COMPONENTS

1280 BA-BoPP AIRCRAFT BOMBING FIRE CONTROL COMPONENTS

1285 BA-BoPP FIRE CONTROL RADAR EQUIPMENT, EXCEPT AIRBORNE

1287 BA-BoPP FIRE CONTROL SONAR EQUIPMENT

1290 BA-BoPP MISCELLANEOUS FIRE CONTROL EQUIPMENT

1560 BA-BoPP AIRFRAME STRUCTURAL COMPONENTS

1610 BA-BoPP AIRCRAFT PROPELLERS AND COMPONENTS

1615 BA-BoPP HELICOPTER ROTOR BLADES, DRIVE MECHANISMS AND COMPONENTS

1620 BA-BoPP AIRCRAFT LANDING GEAR COMPONENTS

1630 BA-BoPP AIRCRAFT WHEEL AND BRAKE SYSTEMS

1640 BA-BoPP AIRCRAFT CONTROL CABLE PRODUCTS

1650 BA-BoPP AIRCRAFT HYDRAULIC, VACUUM, AND DE-ICING SYSTEM COMPONENTS

1660 BA-BoPP AIRCRAFT AIR CONDITIONING, HEATING, AND PRESSURIZING EQUIPMENT

1670 BA-BoPP PARACHUTES; AERIAL PICK UP, DELIVERY, RECOVERY SYSTEMS; AND CARGO TIE DOWN EQUIPMENT

1680 BA-BoPP MISCELLANEOUS AIRCRAFT ACCESSORIES AND COMPONENTS

1710 BA-BoPP AIRCRAFT LANDING EQUIPMENT

1720 BA-BoPP AIRCRAFT LAUNCHING EQUIPMENT

1730 BA-BoPP AIRCRAFT GROUND SERVICING EQUIPMENT

1740 BA-BoPP AIRFIELD SPECIALIZED TRUCKS AND TRAILERS

1990 BA-BoPP MISCELLANEOUS VESSELS

2010 BA-BoPP SHIP AND BOAT PROPULSION COMPONENTS

2020 BA-BoPP RIGGING AND RIGGING GEAR

2030 BA-BoPP DECK MACHINERY

2040 BA-BoPP MARINE HARDWARE AND HULL ITEMS

2050 BA-BoPP BUOYS

2060 BA-BoPP COMMERCIAL FISHING EQUIPMENT

2090 TA MISCELLANEOUS SHIP AND MARINE EQUIPMENT

2230 TA RIGHT-OF-WAY CONSTRUCTION AND MAINTENANCE EQUIPMENT, RAILROAD

2240 TA LOCOMOTIVE AND RAIL CAR ACCESSORIES AND COMPONENTS

2250 TA TRACK MATERIAL, RAILROAD

2410 TA TRACTOR, FULL TRACKED, LOW SPEED

2420 TA TRACTORS, WHEELED

2430 TA TRACTORS, FULL TRACKED, HIGH SPEED

2510 TA VEHICULAR CAB, BODY, AND FRAME STRUCTURAL COMPONENTS

TABLE A.6.2.1 CONTINUED

PSC

Country of Origin

Restrictions

SHORT NAME

2520 TA VEHICULAR POWER TRANSMISSION COMPONENTS

2530 TA VEHICULAR BRAKE, STEERING, AXLE, WHEEL, AND TRACK COMPONENTS

2540 TA VEHICULAR FURNITURE AND ACCESSORIES

2541 TA WEAPONS SYSTEMS SPECIFIC VEHICULAR ACCESSORIES

2590 BA-BoPP MISCELLANEOUS VEHICULAR COMPONENTS

2805 BA-BoPP GASOLINE RECIPROCATING ENGINES, EXCEPT AIRCRAFT; AND COMPONENTS

2810 BA-BoPP GASOLINE RECIPROCATING ENGINES, AIRCRAFT PRIME MOVER; AND COMPONENTS

2815 BA-BoPP DIESEL ENGINES AND COMPONENTS

2820 BA-BoPP STEAM ENGINES, RECIPROCATING; AND COMPONENTS

2825 BA-BoPP STEAM TURBINES AND COMPONENTS

2830 BA-BoPP WATER TURBINES AND WATER WHEELS; AND COMPONENTS

2835 BA-BoPP GAS TURBINES AND JET ENGINES; NON-AIRCRAFT PRIME MOVER, AIRCRAFT NON-PRIME MOVER, AND COMPONENTS

2840 BA-BoPP GAS TURBINES AND JET ENGINES, AIRCRAFT, PRIME MOVING; AND COMPONENTS

2845 BA-BoPP ROCKET ENGINES AND COMPONENTS

2850 BA-BoPP GASOLINE ROTARY ENGINES AND COMPONENTS

2895 TA MISCELLANEOUS ENGINES AND COMPONENTS

2910 TA ENGINE FUEL SYSTEM COMPONENTS, NONAIRCRAFT

2915 TA ENGINE FUEL SYSTEM COMPONENTS, AIRCRAFT AND MISSILE PRIME MOVERS

2920 TA ENGINE ELECTRICAL SYSTEM COMPONENTS, NONAIRCRAFT

2925 TA ENGINE ELECTRICAL SYSTEM COMPONENTS, AIRCRAFT PRIME MOVING

2930 TA ENGINE COOLING SYSTEM COMPONENTS, NONAIRCRAFT

2935 TA ENGINE SYSTEM COOLING COMPONENTS, AIRCRAFT PRIME MOVING

2940 TA ENGINE AIR AND OIL FILTERS, STRAINERS, AND CLEANERS, NONAIRCRAFT

2945 TA ENGINE AIR AND OIL FILTERS, CLEANERS, AIRCRAFT PRIME MOVING

2950 TA TURBOSUPERCHARGER AND COMPONENTS

2990 TA MISCELLANEOUS ENGINE ACCESSORIES, NONAIRCRAFT

2995 TA MISCELLANEOUS ENGINE ACCESSORIES, AIRCRAFT

3010 TA TORQUE CONVERTERS AND SPEED CHANGERS

3020 TA GEARS, PULLEYS, SPROCKETS, AND TRANSMISSION CHAIN

3030 TA BELTING, DRIVE BELTS, FAN BELTS, AND ACCESSORIES

3040 TA MISCELLANEOUS POWER TRANSMISSION EQUIPMENT

3110 BA-BoPP BEARINGS, ANTIFRICTION, UNMOUNTED

3120 BA-BoPP BEARINGS, PLAIN, UNMOUNTED

3130 BA-BoPP BEARINGS, MOUNTED

3210 TA SAWMILL AND PLANING MILL MACHINERY

3220 TA WOODWORKING MACHINES

3230 TA TOOLS AND ATTACHMENTS FOR WOODWORKING MACHINERY

3405 TA SAWS AND FILING MACHINES

3408 TA MACHINING CENTERS AND WAY-TYPE MACHINES

3410 TA ELECTRICAL AND ULTRASONIC EROSION MACHINES

3411 TA BORING MACHINES

PSC

Country of Origin

Restrictions

SHORT NAME

3412 TA BROACHING MACHINES

3413 TA DRILLING AND TAPPING MACHINES

3414 TA GEAR CUTTING AND FINISHING MACHINES

3415 TA GRINDING MACHINES

3416 TA LATHES

3417 TA MILLING MACHINES

3418 TA PLANERS AND SHAPERS

3419 TA MISCELLANEOUS MACHINE TOOLS

3422 TA ROLLING MILLS AND DRAWING MACHINES

3424 TA METAL HEAT TREATING AND NON-THERMAL TREATING EQUIPMENT

3426 TA METAL FINISHING EQUIPMENT

3431 TA ELECTRIC ARC WELDING EQUIPMENT

3432 TA ELECTRIC RESISTANCE WELDING EQUIPMENT

3433 TA GAS WELDING, HEAT CUTTING, AND METALIZING EQUIPMENT

3436 TA WELDING POSITIONERS AND MANIPULATORS

3438 TA MISCELLANEOUS WELDING EQUIPMENT

3439 TA MISCELLANEOUS WELDING, SOLDERING, AND BRAZING SUPPLIES AND ACCESSORIES

3441 TA BENDING AND FORMING MACHINES

3442 TA HYDRAULIC AND PNEUMATIC PRESSES, POWER DRIVEN

3443 TA MECHANICAL PRESSES, POWER DRIVEN

3444 TA MANUAL PRESSES

3445 TA PUNCHING AND SHEARING MACHINES

3446 TA FORGING MACHINERY AND HAMMERS

3447 TA WIRE AND METAL RIBBON FORMING MACHINES

3448 TA RIVETING MACHINES

3449 TA MISCELLANEOUS SECONDARY METAL FORMING AND CUTTING MACHINES

3450 TA MACHINE TOOLS, PORTABLE

3455 TA CUTTING TOOLS FOR MACHINE TOOLS

3456 TA CUTTING AND FORMING TOOLS FOR SECONDARY METALWORKING MACHINERY

3460 TA MACHINE TOOL ACCESSORIES

3461 TA ACCESSORIES FOR SECONDARY METALWORKING MACHINERY

3465 TA PRODUCTION JIGS, FIXTURES, AND TEMPLATES

3470 TA MACHINE SHOP SETS, KITS, AND OUTFITS

3510 TA LAUNDRY AND DRY CLEANING EQUIPMENT

3520 TA SHOE REPAIRING EQUIPMENT

3530 TA INDUSTRIAL SEWING MACHINES AND MOBILE TEXTILE REPAIR SHOPS

3605 TA FOOD PRODUCTS MACHINERY AND EQUIPMENT

3610 TA PRINTING, DUPLICATING, AND BOOKBINDING EQUIPMENT

3611 TA INDUSTRIAL MARKING MACHINES

3615 TA PULP AND PAPER INDUSTRIES MACHINERY

3620 TA RUBBER AND PLASTICS WORKING MACHINERY

PSC

Country of Origin

Restrictions

SHORT NAME

3625 TA TEXTILE INDUSTRIES MACHINERY

3630 TA CLAY AND CONCRETE PRODUCTS INDUSTRIES MACHINERY

3635 TA CRYSTAL AND GLASS INDUSTRIES MACHINERY

3640 TA TOBACCO MANUFACTURING MACHINERY

3645 TA LEATHER TANNING AND LEATHER WORKING INDUSTRIES MACHINERY

3650 TA CHEMICAL AND PHARMACEUTICAL PRODUCTS MANUFACTURING MACHINERY

3655 TA GAS GENERATING AND DISPENSING SYSTEMS, FIXED OR MOBILE

3660 TA INDUSTRIAL SIZE REDUCTION MACHINERY

3670 TA SPECIALIZED SEMICONDUCTOR, MICROCIRCUIT, AND PRINTED CIRCUIT BOARD MANUFACTURING MACHINERY

3680 TA FOUNDRY MACHINERY, RELATED EQUIPMENT AND SUPPLIES

3685 TA SPECIALIZED METAL CONTAINER MANUFACTURING MACHINERY AND RELATED EQUIPMENT

3690 BA-BoPP SPECIALIZED AMMUNITION AND ORDNANCE MACHINERY AND RELATED EQUIPMENT

3693 TA INDUSTRIAL ASSEMBLY MACHINES

3694 TA CLEAN WORK STATIONS, CONTROLLED ENVIRONMENT, AND RELATED EQUIPMENT

3695 TA MISCELLANEOUS SPECIAL INDUSTRY MACHINERY

3710 TA SOIL PREPARATION EQUIPMENT

3720 TA HARVESTING EQUIPMENT

3730 TA DAIRY, POULTRY, AND LIVESTOCK EQUIPMENT

3740 TA PEST, DISEASE, AND FROST CONTROL EQUIPMENT

3770 TA SADDLERY, HARNESS, WHIPS, AND RELATED ANIMAL FURNISHINGS

3805 TA EARTH MOVING AND EXCAVATING EQUIPMENT

3810 TA CRANES AND CRANE-SHOVELS

3815 TA CRANE AND CRANE-SHOVEL ATTACHMENTS

3820 TA MINING, ROCK DRILLING, EARTH BORING, AND RELATED EQUIPMENT

3825 TA ROAD CLEARING, CLEANING, AND MARKING EQUIPMENT

3830 TA TRUCK AND TRACTOR ATTACHMENTS

3895 TA MISCELLANEOUS CONSTRUCTION EQUIPMENT

3910 TA CONVEYORS

3915 TA MATERIALS FEEDERS

3920 TA MATERIAL HANDLING EQUIPMENT, NONSELF-PROPELLED

3930 TA WAREHOUSE TRUCKS AND TRACTORS, SELF-PROPELLED

3940 TA BLOCKS, TACKLE, RIGGING, AND SLINGS

3950 TA WINCHES, HOISTS, CRANES, AND DERRICKS

3960 TA FREIGHT ELEVATORS

3990 TA MISCELLANEOUS MATERIALS HANDLING EQUIPMENT

4010 TA CHAIN AND WIRE ROPE

4020 TA FIBER ROPE, CORDAGE, AND TWINE

4030 TA FITTINGS FOR ROPE, CABLE, AND CHAIN

4110 TA REFRIGERATION EQUIPMENT

4120 TA AIR CONDITIONING EQUIPMENT

4130 TA REFRIGERATION AND AIR CONDITIONING COMPONENTS

PSC

Country of Origin

Restrictions

SHORT NAME

4140 TA FANS, AIR CIRCULATORS, AND BLOWER EQUIPMENT

4150 TA VORTEX TUBES AND OTHER RELATED COOLING TUBES

4210 TA FIRE FIGHTING EQUIPMENT

4220 TA MARINE LIFESAVING AND DIVING EQUIPMENT

4230 TA DECONTAMINATING AND IMPREGNATING EQUIPMENT

4235 TA HAZARDOUS MATERIAL SPILL CONTAINMENT AND CLEAN-UP EQUIPMENT AND MATERIAL

4240 TA SAFETY AND RESCUE EQUIPMENT

4250 TA RECYCLING AND RECLAMATION EQUIPMENT

4310 TA COMPRESSORS AND VACUUM PUMPS

4320 TA POWER AND HAND PUMPS

4330 TA CENTRIFUGALS, SEPARATORS, AND PRESSURE AND VACUUM FILTERS

4410 TA INDUSTRIAL BOILERS

4420 TA HEAT EXCHANGERS AND STEAM CONDENSERS

4430 TA INDUSTRIAL FURNACES, KILNS, LEHRS, AND OVENS

4440 TA DRIERS, DEHYDRATORS, AND ANHYDRATORS

4460 TA AIR PURIFICATION EQUIPMENT

4510 TA PLUMBING FIXTURES AND ACCESSORIES

4520 TA SPACE AND WATER HEATING EQUIPMENT

4530 TA FUEL BURNING EQUIPMENT UNITS

4540 TA WASTE DISPOSAL EQUIPMENT

4610 TA WATER PURIFICATION EQUIPMENT

4620 TA WATER DISTILLATION EQUIPMENT, MARINE AND INDUSTRIAL

4630 TA SEWAGE TREATMENT EQUIPMENT

4710 TA PIPE, TUBE AND RIGID TUBING

4720 TA HOSE AND FLEXIBLE TUBING

4730 TA HOSE, PIPE, TUBE, LUBRICATION, AND RAILING FITTINGS

4810 TA VALVES, POWERED

4820 TA VALVES, NONPOWERED

4910 TA MOTOR VEHICLE MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT

4920 BA-BoPP AIRCRAFT MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT

4921 BA-BoPP TORPEDO MAINTENANCE, REPAIR, AND CHECKOUT SPECIALIZED EQUIPMENT

4923 BA-BoPP DEPTH CHARGES AND UNDERWATER MINES MAINTENANCE, REPAIR, AND CHECKOUT SPECIALIZED EQUIPMENT

4925 BA-BoPP AMMUNITION MAINTENANCE, REPAIR, AND CHECKOUT SPECIALIZED EQUIPMENT

4927 BA-BoPP ROCKET MAINTENANCE, REPAIR AND CHECKOUT SPECIALIZED EQUIPMENT

4930 TA LUBRICATION AND FUEL DISPENSING EQUIPMENT

4931 BA-BoPP FIRE CONTROL MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT

4933 BA-BoPP WEAPONS MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT

4935 BA-BoPP GUIDED MISSILE MAINTENANCE, REPAIR, AND CHECKOUT SPECIALIZED EQUIPMENT

4940 TA MISCELLANEOUS MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT

4960 BA-BoPP SPACE VEHICLE MAINTENANCE, REPAIR, AND CHECKOUT SPECIALIZED EQUIPMENT

4970 BA-BoPP MULTIPLE GUIDED WEAPONS, SPECIALIZED MAINTENANCE AND REPAIR SHOP EQUIPMENT

PSC

Country of Origin

Restrictions

SHORT NAME

5110 Berry HAND TOOLS, EDGED, NONPOWERED

5120 Berry HAND TOOLS, NONEDGED, NONPOWERED

5130 Berry HAND TOOLS, POWER DRIVEN

5133 Berry DRILL BITS, COUNTERBORES, AND COUNTERSINKS: HAND AND MACHINE

5136 Berry TAPS, DIES, AND COLLETS; HAND AND MACHINE

5140 Berry TOOL AND HARDWARE BOXES

5180 Berry SETS, KITS, AND OUTFITS OF HAND TOOLS

5210 Berry MEASURING TOOLS, CRAFTSMEN'S

5220 Berry INSPECTION GAGES AND PRECISION LAYOUT TOOLS

5280 Berry SETS, KITS, AND OUTFITS OF MEASURING TOOLS

5305 TA SCREWS

5306 TA BOLTS

5307 TA STUDS

5310 TA NUTS AND WASHERS

5315 TA NAILS, MACHINE KEYS, AND PINS

5320 TA RIVETS

5325 TA FASTENING DEVICES

5330 TA PACKING AND GASKET MATERIALS

5331 TA O-RING

5335 TA METAL SCREENING

5340 TA HARDWARE, COMMERCIAL

5342 TA HARDWARE, WEAPON SYSTEM

5345 TA DISKS AND STONES, ABRASIVE

5350 TA ABRASIVE MATERIALS

5355 TA KNOBS AND POINTERS

5360 TA COIL, FLAT, LEAF, AND WIRE SPRINGS

5365 TA BUSHINGS, RINGS, SHIMS, AND SPACERS

5410 TA PREFABRICATED AND PORTABLE BUILDINGS

5411 TA RIGID WALL SHELTERS

5419 TA COLLECTIVE MODULAR SUPPORT SYSTEM

5420 TA BRIDGES, FIXED AND FLOATING

5430 TA STORAGE TANKS

5440 TA SCAFFOLDING EQUIPMENT AND CONCRETE FORMS

5445 TA PREFABRICATED TOWER STRUCTURES

5450 TA MISCELLANEOUS PREFABRICATED STRUCTURES

5510 TA LUMBER AND RELATED BASIC WOOD MATERIALS

5520 TA MILLWORK

5530 TA PLYWOOD AND VENEER

5630 TA PIPE AND CONDUIT, NONMETALLIC

5640 TA WALLBOARD, BUILDING PAPER, AND THERMAL INSULATION MATERIALS

5650 TA ROOFING AND SIDING MATERIALS

PSC

Country of Origin

Restrictions

SHORT NAME

5660 TA FENCING, FENCES, GATES AND COMPONENTS

5670 TA BUILDING COMPONENTS, PREFABRICATED

5675 BA-BoPP NONWOOD CONSTRUCTION LUMBER AND RELATED MATERIALS

5680 BA-BoPP MISCELLANEOUS CONSTRUCTION MATERIALS

5805 BA-BoPP TELEPHONE AND TELEGRAPH EQUIPMENT

5810 BA-BoPP COMMUNICATIONS SECURITY EQUIPMENT AND COMPONENTS

5811 BA-BoPP OTHER CRYPTOLOGIC EQUIPMENT AND COMPONENTS

5815 BA-BoPP TELETYPE AND FACSIMILE EQUIPMENT

5820 BA-BoPP RADIO AND TELEVISION COMMUNICATION EQUIPMENT, EXCEPT AIRBORNE

5821 BA-BoPP RADIO AND TELEVISION COMMUNICATION EQUIPMENT, AIRBORNE

5825 TA RADIO NAVIGATION EQUIPMENT, EXCEPT AIRBORNE

5826 TA RADIO NAVIGATION EQUIPMENT, AIRBORNE

5830 BA-BoPP INTERCOMMUNICATION AND PUBLIC ADDRESS SYSTEMS, EXCEPT AIRBORNE

5831 BA-BoPP INTERCOMMUNICATION AND PUBLIC ADDRESS SYSTEMS, AIRBORNE

5835 BA-BoPP SOUND RECORDING AND REPRODUCING EQUIPMENT

5836 BA-BoPP VIDEO RECORDING AND REPRODUCING EQUIPMENT

5840 BA-BoPP RADAR EQUIPMENT, EXCEPT AIRBORNE

5841 BA-BoPP RADAR EQUIPMENT, AIRBORNE

5845 BA-BoPP UNDERWATER SOUND EQUIPMENT

5850 BA-BoPP VISIBLE AND INVISIBLE LIGHT COMMUNICATION EQUIPMENT

5855 BA-BoPP NIGHT VISION EQUIPMENT, EMITTED AND REFLECTED RADIATION

5860 BA-BoPP STIMULATED COHERENT RADIATION DEVICES, COMPONENTS, AND ACCESSORIES

5865 BA-BoPP ELECTRONIC COUNTERMEASURES, COUNTER-COUNTERMEASURES AND QUICK REACTION CAPABILITY EQUIPMENT

5895 BA-BoPP MISCELLANEOUS COMMUNICATION EQUIPMENT

5905 BA-BoPP RESISTORS

5910 BA-BoPP CAPACITORS

5915 BA-BoPP FILTERS AND NETWORKS

5920 BA-BoPP FUSES, ARRESTORS, ABSORBERS, AND PROTECTORS

5925 BA-BoPP CIRCUIT BREAKERS

5930 BA-BoPP SWITCHES

5935 BA-BoPP CONNECTORS, ELECTRICAL

5940 BA-BoPP LUGS, TERMINALS, AND TERMINAL STRIPS

5945 BA-BoPP RELAYS AND SOLENOIDS

5950 BA-BoPP COILS AND TRANSFORMERS

5955 BA-BoPP OSCILLATORS AND PIEZOELECTRIC CRYSTALS

5960 BA-BoPP ELECTRON TUBES AND ASSOCIATED HARDWARE

5961 BA-BoPP SEMICONDUCTOR DEVICES AND ASSOCIATED HARDWARE

5962 BA-BoPP MICROCIRCUITS, ELECTRONIC

5963 BA-BoPP ELECTRONIC MODULES

5965 BA-BoPP HEADSETS, HANDSETS, MICROPHONES AND SPEAKERS

5970 BA-BoPP ELECTRICAL INSULATORS AND INSULATING MATERIALS

PSC

Country of Origin

Restrictions

SHORT NAME

5975 BA-BoPP ELECTRICAL HARDWARE AND SUPPLIES

5977 BA-BoPP ELECTRICAL CONTACT BRUSHES AND ELECTRODES

5980 BA-BoPP OPTOELECTRONIC DEVICES AND ASSOCIATED HARDWARE

5985 BA-BoPP ANTENNAS, WAVEGUIDES, AND RELATED EQUIPMENT

5990 BA-BoPP SYNCHROS AND RESOLVERS

5995 BA-BoPP CABLE, CORD, AND WIRE ASSEMBLIES: COMMUNICATION EQUIPMENT

5996 BA-BoPP AMPLIFIERS

5998 BA-BoPP ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE

5999 BA-BoPP MISCELLANEOUS ELECTRICAL AND ELECTRONIC COMPONENTS

6010 BA-BoPP FIBER OPTIC CONDUCTORS

6015 BA-BoPP FIBER OPTIC CABLES

6020 BA-BoPP FIBER OPTIC CABLE ASSEMBLIES AND HARNESSES

6021 BA-BoPP FIBER OPTIC SWITCHES

6030 BA-BoPP FIBER OPTIC DEVICES

6032 BA-BoPP FIBER OPTIC LIGHT SOURCES AND PHOTO DETECTORS

6035 BA-BoPP FIBER OPTIC LIGHT TRANSFER AND IMAGE TRANSFER DEVICES

6060 BA-BoPP FIBER OPTIC INTERCONNECTORS

6070 BA-BoPP FIBER OPTIC ACCESSORIES AND SUPPLIES

6080 BA-BoPP FIBER OPTIC KITS AND SETS

6099 BA-BoPP MISCELLANEOUS FIBER OPTIC COMPONENTS

6105 TA MOTORS, ELECTRICAL

6110 TA ELECTRICAL CONTROL EQUIPMENT

6115 TA GENERATORS AND GENERATOR SETS, ELECTRICAL

6116 TA FUEL CELL POWER UNITS, COMPONENTS, AND ACCESSORIES

6117 TA SOLAR ELECTRIC POWER SYSTEMS

6120 TA TRANSFORMERS: DISTRIBUTION AND POWER STATION

6125 TA CONVERTERS, ELECTRICAL, ROTATING

6130 TA CONVERTERS, ELECTRICAL, NONROTATING

6135 TA BATTERIES, NONRECHARGEABLE

6140 TA BATTERIES, RECHARGEABLE

6145 TA WIRE AND CABLE, ELECTRICAL

6150 TA MISCELLANEOUS ELECTRIC POWER AND DISTRIBUTION EQUIPMENT

6160 TA MISCELLANEOUS BATTERY RETAINING FIXTURES, LINERS AND ANCILLARY ITEMS

6210 TA INDOOR AND OUTDOOR ELECTRIC LIGHTING FIXTURES

6220 TA ELECTRIC VEHICULAR LIGHTS AND FIXTURES

6230 TA ELECTRIC PORTABLE AND HAND LIGHTING EQUIPMENT

6240 TA ELECTRIC LAMPS

6250 TA BALLASTS, LAMPHOLDERS, AND STARTERS

6260 TA NONELECTRICAL LIGHTING FIXTURES

6310 TA TRAFFIC AND TRANSIT SIGNAL SYSTEMS

6320 TA SHIPBOARD ALARM AND SIGNAL SYSTEMS

PSC

Country of Origin

Restrictions

SHORT NAME

6330 TA RAILROAD SIGNAL AND WARNING DEVICES

6340 TA AIRCRAFT ALARM AND SIGNAL SYSTEMS

6350 TA MISCELLANEOUS ALARM, SIGNAL, AND SECURITY DETECTION SYSTEMS

6532 TA HOSPITAL AND SURGICAL CLOTHING AND RELATED SPECIAL PURPOSE ITEMS

6625 TA ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING INSTRUMENTS

6630 TA CHEMICAL ANALYSIS INSTRUMENTS

6635 TA PHYSICAL PROPERTIES TESTING AND INSPECTION

6640 TA LABORATORY EQUIPMENT AND SUPPLIES

6645 TA TIME MEASURING INSTRUMENTS

6650 TA OPTICAL INSTRUMENTS, TEST EQUIPMENT, COMPONENTS AND ACCESSORIES

6655 TA GEOPHYSICAL INSTRUMENTS

6660 TA METEOROLOGICAL INSTRUMENTS AND APPARATUS

6665 TA HAZARD-DETECTING INSTRUMENTS AND APPARATUS

6670 TA SCALES AND BALANCES

6675 TA DRAFTING, SURVEYING, AND MAPPING INSTRUMENTS

6680 TA LIQUID AND GAS FLOW, LIQUID LEVEL, AND MECHANICAL MOTION MEASURING INSTRUMENTS

6685 TA PRESSURE, TEMPERATURE, AND HUMIDITY MEASURING AND CONTROLLING INSTRUMENTS

6695 TA COMBINATION AND MISCELLANEOUS INSTRUMENTS

6710 TA CAMERAS, MOTION PICTURE

6720 TA CAMERAS, STILL PICTURE

6730 TA PHOTOGRAPHIC PROJECTION EQUIPMENT

6740 TA PHOTOGRAPHIC DEVELOPING AND FINISHING EQUIPMENT

6750 TA PHOTOGRAPHIC SUPPLIES

6760 TA PHOTOGRAPHIC EQUIPMENT AND ACCESSORIES

6770 TA FILM, PROCESSED

6780 TA PHOTOGRAPHIC SETS, KITS, AND OUTFITS

6820 TA DYES

6840 TA PEST CONTROL AGENTS AND DISINFECTANTS

6850 TA MISCELLANEOUS CHEMICAL SPECIALTIES

6910 TA TRAINING AIDS

6920 TA ARMAMENT TRAINING DEVICES

6930 TA OPERATION TRAINING DEVICES

6940 TA COMMUNICATION TRAINING DEVICES

7110 TA OFFICE FURNITURE

7125 TA CABINETS, LOCKERS, BINS, AND SHELVING

7195 TA MISCELLANEOUS FURNITURE AND FIXTURES

7210 TA HOUSEHOLD FURNISHINGS

7310 TA FOOD COOKING, BAKING, AND SERVING EQUIPMENT

7320 TA KITCHEN EQUIPMENT AND APPLIANCES

7330 TA KITCHEN HAND TOOLS AND UTENSILS

7340 TA CUTLERY AND FLATWARE

PSC

Country of Origin

Restrictions

SHORT NAME

7350 TA TABLEWARE

7360 TA SETS, KITS, OUTFITS AND MODULES, FOOD PREPERATION AND SERVING

7450 TA OFFICE TYPE SOUND RECORDING AND REPRODUCING MACHINES

7490 TA MISCELLANEOUS OFFICE MACHINES

7510 TA OFFICE SUPPLIES

7520 TA OFFICE DEVICES AND ACCESSORIES

7530 TA STATIONERY AND RECORD FORMS

7610 TA BOOKS AND PAMPHLETS

7630 TA NEWSPAPERS AND PERIODICALS

7660 TA SHEET AND BOOK MUSIC

7670 TA MICROFILM, PROCESSED

7690 TA MISCELLANEOUS PRINTED MATTER

7910 TA FLOOR POLISHERS AND VACUUM CLEANING EQUIPMENT

7920 TA BROOMS, BRUSHES, MOPS, AND SPONGES

7930 TA CLEANING AND POLISHING COMPOUNDS AND PREPARATIONS

8010 TA PAINTS, DOPES, VARNISHES, AND RELATED PRODUCTS

8020 TA PAINT AND ARTISTS' BRUSHES

8030 TA PRESERVATIVE AND SEALING COMPOUNDS

8040 TA ADHESIVES

8105 TA BAGS AND SACKS

8110 TA DRUMS AND CANS

8115 TA BOXES, CARTONS, AND CRATES

8125 TA BOTTLES AND JARS

8130 TA REELS AND SPOOLS

8135 TA PACKAGING AND PACKING BULK MATERIALS

8140 BA-BoPP AMMUNITION AND NUCLEAR ORDNANCE BOXES, PACKAGES AND SPECIAL CONTAINERS

8145 TA SPECIALIZED SHIPPING AND STORAGE CONTAINERS

8150 TA FREIGHT CONTAINERS

8405 Berry OUTERWEAR, MEN'S

8410 Berry OUTERWEAR, WOMEN'S

8415 Berry CLOTHING, SPECIAL PURPOSE

8420 Berry UNDERWEAR AND NIGHTWEAR, MEN'S

8425 Berry UNDERWEAR AND NIGHTWEAR, WOMEN'S

8430 Berry FOOTWEAR, MEN'S

8435 Berry FOOTWEAR, WOMEN'S

8440 Berry HOSIERY, HANDWEAR, AND CLOTHING ACCESSORIES, MEN'S

8445 Berry HOSIERY, HANDWEAR, AND CLOTHING ACCESSORIES, WOMEN'S

8450 Berry CHILDREN'S AND INFANTS' APPAREL AND ACCESSORIES

8455 Berry BADGES AND INSIGNIA

8460 TA LUGGAGE

8465 Berry INDIVIDUAL EQUIPMENT

PSC

Country of Origin

Restrictions

SHORT NAME

8475 Berry SPECIALIZED FLIGHT CLOTHING AND ACCESSORIES

8540 TA TOILETRY PAPER PRODUCTS

9110 TA FUELS, SOLID

9150 TA OILS AND GREASES: CUTTING, LUBRICATING, AND HYDRAULIC

9160 BA-BoPP MISCELLANEOUS WAXES, OILS, AND FATS

9310 TA PAPER AND PAPERBOARD

9505 BA-BoPP WIRE, NONELECTRICAL

9510 BA-BoPP BARS AND RODS

9515 BA-BoPP PLATE, SHEET, STRIP, FOIL, AND LEAF

9520 BA-BoPP STRUCTURAL SHAPES

9525 BA-BoPP WIRE, NONELECTRICAL, NONFERROUS BASE METAL

9530 BA-BoPP BARS AND RODS, NONFERROUS BASE METAL

9535 BA-BoPP PLATE, SHEET, STRIP, AND FOIL; NONFERROUS BASE METAL

9540 BA-BoPP STRUCTURAL SHAPES, NONFERROUS BASE METAL

9545 TA PLATE, SHEET, STRIP, FOIL, AND WIRE: PRECIOUS METAL

9905 TA SIGNS, ADVERTISING DISPLAYS, AND IDENTIFICATION PLATES

A.6.2.2. Descriptions of the Product Service Codes/Federal Supply Classes listed in the table above can be found at one of the following websites:

https://www.dibbs.bsm.dla.mil/refs/fsc.aspx http://www.dlis.dla.mil/H2/search.aspx https://www.fpds.gov/downloads/psc_data_Oct012015.xls

A.6.3. Excluded Items

A.6.3.1. It is the Offeror’s responsibility to exclude the following from the proposal and associated catalog:

• Mandatory source items; items that compete with AbilityOne and UNICOR

(see FAR 8.602 and 8.700 Policy, and FAR 8.603 and 8.704 Purchase Priorities)

• Non-COTS items (see FAR Subpart 2.101 Definitions, “Commercially available off-the-shelf

(COTS) item”)

• Non-DLA type items or items not falling within the scope of the listing above at A.6.3.1.

• Actively Managed National Stock Numbers (NSNs), which means all NSNs with an

Acquisition Advice Code (AAC) except NSNs with an AAC of "J", "V", "Y", or no AAC value

• Items requiring Government Source Inspection

• Qualified product list and critical safety items (see DLAD 8.400-90(d)(2), 11.301, and

52.211-9005, and FAR 2.101)

• Services

• Surplus Items or Surplus material (see DLAD 11.301) https://www.dibbs.bsm.dla.mil/refs/fsc.aspx http://www.dlis.dla.mil/H2/search.aspx https://www.fpds.gov/downloads/psc_data_Oct012015.xls

• Ammunition

• Tires (TACOM managed)

• Any individual item that has an offered price greater than $100,000.00 (or $35,000 if only

Fast Payment Procedures are utilized under the contract).

• Items not in accordance with the Buy American Balance of Payments Program or Trade

Agreements (see DFARS 252.225-7001, 252.225-7021, and 225.401-70), and other

Authorization Acts, Appropriations Acts, and Other Statutory Restrictions on Foreign

Acquisition (see DFARS 225.70) including the “Berry Amendment” (see DFARS 225.7002-

1, as implemented by 10 U.S.C. 2533a; see also DFARS 252.225-7012 and DFARS 252.225-

7015).

A.6.3.2. Offers failing to comply with the exclusions above may be rejected. Offerors may re-submit a corrected proposal as long as the solicitation remains open.

A.6.3.3. Offered items that are considered to be “Essentially the Same” (ETS) as those listed on the AbilityOne Procurement List of products are considered excluded items. The AbilityOne

Procurement List can be viewed at http://abilityone.org/work_with_us/procurement.html. A listing of

ETS-type items can be viewed at http://www.abilityone.gov/distributors/potential.html. All vendors are subject to a formal ETS review conducted by AbilityOne personnel.

A.6.3.4. Any item offered in response to this solicitation that has an assigned NSN will be removed from the offeror’s catalog and will not be loaded to the DOD EMALL system unless the DOD

EMALL Contracting Office receives a prior request or authorization from the cognizant DLA Supply

Chain or Program Office responsible for managing the NSN to add the NSN to DOD EMALL.

A.6.3.5. Offers containing items that require Government source inspection will be removed, but may be added to the DOD EMALL system under separate agreement or contract that has been entered into outside of this solicitation provided that the separate agreement or contract contains all of the terms and conditions required for DOD EMALL participation.

A.6.3.6. Offerors are advised that DFARS Clause 252.225-7012, Preference for Certain

Domestic Commodities (FEB 2013) and DFARS Clause 252.225-7021, Trade Agreements (NOV 2014) apply to this solicitation.

[END OF SECTION]

http://www.acq.osd.mil/dpap/dars/dfars/html/current/225_4.htm#225.401-70 http://abilityone.org/work_with_us/procurement.html http://www.abilityone.gov/distributors/potential.html

B. CAUTION NOTICES

B.1. As America’s Combat Logistics Support Agency, the Defense Logistics Agency (DLA) provides effective and efficient worldwide support to Warfighters and our other customers. We receive guidance from the Deputy Under Secretary of Defense (Logistics and Materiel Readiness), and as a statutory

Combat Support Agency we report to the Chairman, Joint Chiefs of Staff and the Combatant Commands in providing worldwide logistics support to deployed forces. DLA is responsible for sourcing and providing most of the repair parts and virtually all fuel and troop support consumable items used by our military forces. We also procure Service-managed depot-level repair items. In addition, DLA provides a broad array of supporting supply chain management services, including storage and distribution, reutilization or disposal of surplus military assets, managing Defense strategic materials, providing catalogs and other logistics information, and supplying a wide range of document services. We support

U.S. allies through Foreign Military Sales and are a vital contributor whenever this country undertakes humanitarian relief efforts at home or abroad. We provide human resources management and workforce development services to other DOD components.

B.2. Our values are DLA’s foundation for all we do. They provide our guiding principles as we accomplish our mission, pursue our vision, and strive to do what is right for the Armed Forces and DoD:

Warfighter needs guide us

Integrity defines us

Diversity strengthens us

Excellence inspires us

B.3. The Department of Defense Electronic Mall (DOD EMALL) is a web-based online ordering platform meant to provide a full service e-Commerce site to find and acquire finished goods and services from the commercial marketplace and government sources for the Department of Defense and other

State and Federal agencies.

B.4. This solicitation is being issued as part of a Multiple Award Schedule (MAS) Program. using the guidance of FAR and DFARS Subpart 8.4 for ordering procedures. (See DLAD 8.400-90 DoD electronic mall (EMALL) and FAR 38.000 Federal Supply Schedule Contracting). The DoD MAS program is designed to provide logistic support that empowers the customer to select the product that best meets their mission needs using best value ordering procedures.

B.5. All items offered in response to this solicitation must be a “Commercially available off-the-shelf

(COTS) item” as defined by FAR 2.101. See Section A.6.3.1 of this solicitation for a complete listing of all excluded items, including items with assigned National Stock Numbers (NSNs) and items requiring

Government Source Inspection.

B.6. This solicitation applies to Government facilities worldwide. Offerors may provide “Zoned

Pricing” for up to ten (10) geographical areas covering Contiguous United States (CONUS) delivery and/or Outside Contiguous United States (OCONUS) delivery (see Section D.3.3.3 of the Statement of

Work, and Addendum to 52.212-1, Subparagraph (b)(6)).

B.7. Offerors are required to provide with their offers a list of contracts (commercial and/or government) performed within the last two years as detailed in Section E, Addendum to 52.212-1, Subparagraph

(b)(10)(ii) of this solicitation.

Section B. Caution Notices

B.8. Offerors are required to submit their past year’s history of sales to DoD and to other Federal

Government entities as detailed on Section E, Addendum to 52.212-1, Subparagraph (b)(10)(iii) and

FAR 52.215-20 of this solicitation with your offer.

B.9. Offerors are required to provide an Electronic Commerce (“EC”) Implementation Plan as detailed

Section E, Addendum to 52.212-1, Subparagraph (b)(4)(v) of this solicitation.

B.10. Offerors are required to submit other than cost and pricing data in accordance with FAR 52.215-

20 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing

Data, Alternate IV (OCT 2010) of this solicitation.

B.11. An initial assessment of all proposals submitted prior to the closing date and time will be performed within a reasonable amount of time after offers are retrieved from the Business Opportunities

Office to determine completeness. The proposals will be reviewed in order of receipt and compared to the checklist found in Section E, Addendum to 52.212-1, Subparagraph (g)(3) of this solicitation. Upon evaluation of the proposal, the Contracting Officer will make a determination as to whether the offeror has an understanding of the solicitation requirements sufficient enough to move forward. If the

Contracting Officer determines that the offeror has not demonstrated an understanding of the solicitation requirements, he/she may determine the proposal to be non-compliant and may return the proposal without further evaluation.

B.12. Minimum Surge Requirements. The DOD EMALL Contracting Office intends to partner with the contractors in supporting deploying units. DOD EMALL may be used as a vehicle for the rapid acquisition of essential supplies to respond to DoD wartime, contingency or humanitarian operations.

Surge as used in this solicitation is the ability of the industrial base to meet accelerated delivery requirements with existing industrial base capabilities across the spectrum of contingencies. This includes both the capability to ramp-up quickly to meet early requirements as well as sustain this increased pace throughout the conflict. Recognizing the unique requirements of the DoD and its national security roles, those contractors offering items required to support surge requirements will be requested to participate when the actual requirements are known.

B.13. DFARS Clause 252.225-7012, Preference for Certain Domestic Commodities (FEB 2013) and

DFARS Clause 252.225-7021, Trade Agreements (NOV 2014) apply to this solicitation.

B.14. CONTRACTOR CODE OF BUSINESS ETHICS (DEC 2010)

FAR Part 3.1002(a) requires all government contractors to conduct themselves with the highest degree of integrity and honesty. Contractors should have a written code of business ethics and conduct. To promote compliance with such code of business ethics and conduct, contractors should have an employee business ethics and compliance training program that facilitates timely discovery and disclosure of improper conduct in connection with government contracts and ensures corrective measures are promptly instituted and carried out. A contractor may be suspended and/or debarred for knowing failure by a principal to timely disclose to the government, in connection with the award, performance, or closeout of a government contract performed by the contractor or a subcontract awarded there under, credible evidence of a violation of federal criminal law involving fraud, conflict of interest, bribery, or gratuity violations found in title 18 of the United States Code or a violation of the False Claims Act. (31 U.S.C. 3729-3733).

The solicitation or contract includes FAR Clause 52.203-13, Contractor Code of Business Ethics and

Conduct (APR 2010) contained elsewhere in the solicitation. The contractor shall comply with the terms of the clause and have a written code of business ethics and conduct; exercise due diligence to prevent and detect criminal conduct, promote ethical conduct and a commitment to compliance with the law within their organization; and timely report any violations of Federal criminal law involving fraud, conflict of interest, bribery or gratuity violations found in Title 18 of the United States Code or any violation of the False Claims Act (31 U.S.C 3729-3733).

B.15. Next Generation e-Commerce Solution (NGe-Com)

B.15.1. Under the auspices of the Office of the Secretary of Defense (OSD), Defense Procurement and Acquisition Policy (DPAP), DLA is pursuing NGe-Com to serve as a technology refresh to its legacy system. DLA has partnered with the General Services Administration (GSA) Federal Acquisition

Service (FAS) to develop a single Government Electronic Mall to provide one-stop shopping for GSA and DoD customers (note: this effort was previously referred to as “DOD EMALL 2.0”). The NGe-

Com effort is expected to provide the government with a cost effective way to address current and future user needs by providing industry best practices, enhanced system performance, flexibility, and scalability. The chosen solution will be able to do this while also improving the user experience to provide more of a commercial look and feel, and may be in its Full Deployment (FD) phase of development as early as the end of the third quarter of Fiscal Year (FY) 2015. Given this aggressive timeline and the overall complexity of this effort, it is anticipated that there will be an integrated concurrent approach to development and deployment.

B.15.2. The new system resulting from the NGe-Com effort will offer current and new functionality that may include, but not be limited to: the ability to support purchases of a variety of goods and services under different terms and conditions; capability to promote preferred sources; real-time order tracking and status; Vendor Dynamic Pricing (new policy pending); open interface standards supporting vendor-managed catalogs (new policy pending); the ability to support Reverse Auctions (see DLAD 52.215-

9023); capability for customers to provide reviews on vendors and products; new messaging features; a mobile-ready application; and et cetera. Some functionality of the new system is dependent upon policy changes, which may or may not be established at the time of FD.

B.15.3. Current DOD EMALL contractors, including those awarded contracts resulting from this solicitation, may be required to agree to new terms and conditions prior to transitioning to the system developed as a result of the NGe-Com effort (see B.17. and B.18.). Any new terms and conditions may be modified into the existing contract in accordance with FAR 52.212-4(c) “Contract Terms and

Conditions – Commercial Items”.

B.16. The DLA does not warrant the accuracy, completeness, or timeliness of information provided through DOD EMALL. Support contractors to the DLA and the DoD EMALL shall not be held liable for loss or damages resulting from information provided through the DOD EMALL.

B.17. The DLA reserves the right to change the terms and conditions for participation in the DOD

EMALL. Vendors will be notified of such changes at least 15 calendar days…