SALIENT CHARACTERISTICS FOR SP4707-12-R-0001 Labels and Ribbons.docx

RFP SP4707-12-R-0001

SALIENT CHARACTERISTICS FOR ITEMS LISTED IN THE BID SCHEDULE 1, 5

Items 0001, 1001, 2001: 4”wide x 6” length POLYETH 3MIL thermal transfer Barcode Label Labels must be useable in an Intermec PD42G printer Maximum 8” diameter rolls Equivalent to Syntran material 950 to 1,000 labels per roll Permanent all-temp adhesive Label will have an exposed liner of 1/8” on all four sides Label will have a perforated edge and must be rounded on the corners Label color is white 6 months or greater outdoor use Physical Attributes

3.2 - 3.8 Liner 50# Super Calendered Kraft Caliper Mils: 3.0 target

Items 0002, 1002, 2002: 3”wide x 1” length POLYETH 3MIL thermal transfer Barcode Label Labels must be useable in an Intermec PD42G printer Maximum 8” diameter rolls Equivalent to Syntran material Minimum 5,888 labels per roll Permanent all-temp adhesive Label will have an exposed liner of 1/8” on all four sides Label will have a perforated edge and must be rounded on the corners Label color is white 6 months or greater outdoor use Physical Attributes

3.2 - 3.8 Liner 50# Super Calendered Kraft Caliper Mils: 3.0 target

Items 0003, 1003, 2003 4” wide x 6,000 “ resin ribbon Ribbon must be useable in an Intermec PD42G printer Ribbon color is black Ribbon Film Type: Polyethylene terephthalate Total Ribbon Thickness: 7.2 to 8.8 ųm Ribbon Film Thickness: 4.4 to 5.4 ųm Image Density (4ips/4420): 1.4 OD min.

Flaking Resistance: No flaking Film Break Strength (MD): 29 kg/mm2 min.

IPA Crock (2 ips/4420): B at 25 cycles/2.95# arm Scratch (2 ips/4420): B at 200 cycles/2.95# arm Ambient Operating Temperature and RH: 5 to 35°C, 5 to 70% RH Print Quality (4ips/PM4i): ANSI A on 10 mil ladder Eq