DMM Tech Specs and PWS.pdf
PDF 344 KB Posted
- Attached to
- PTC Digital Multimeter (DMM), Keysight 3458A
- Solicitation number
- SP4706-26-Q-0016
- Issued by
-
Defense Logistics Agency
About this file
This is a Technical Specifications document for a federal contract opportunity to supply digital multimeters to the Defense Supply Center Columbus (DSCC) for the DLA Product Test Center in Columbus, Ohio.
The contractor must provide two (2) new Keysight 3458A digital multimeters with specific performance requirements, including at least 8.5 digit precision, minimum accuracy of 8ppm, and measurability capabilities up to 1kV, 1GΩ, 1.5A peak, and 2MHz. Each unit must be capable of measuring 2-wire and 4-wire Ohm resistance, AC/DC voltage and current, frequency, and period, with both front-unit and rear-unit input terminals. The multimeters must include an operating manual, NIST-traceable calibration certificate, and ISO 17025 accredited calibration certificate with data and uncertainties. A required upgrade includes a GPIB Interface. The units must function as drop-in replacements compatible with custom software created by EPTC. Delivery is required within 30 days of award to Defense Supply Center Columbus, 300 North James Road, Building 17-3, marked for DLA Product Test Center, Building 11-7 (TE Lab), Columbus, Ohio 43213. All shipping costs must be included in the contracted price, and the contractor must notify Kyle Palmer when instruments are ready for delivery. Invoices shall be submitted through the Wide Area Workflow (WAWF) system in accordance with DFARS 252.232-7003 and 252.232-7006 within 10 workdays after conclusion of each training session. The WAWF acceptance DODAAC for TA Lab is SL0700. The primary point of contact is Kyle Palmer, the Government Contract Officer Representative (COR), who can be reached at Kyle.palmer@dla.mil or (614) 692-8860.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF1449_SP470626Q0016.PDF |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Rev 04/10/2024
Technical Specifications
Digital Multimeter
DLA Product Test Center, VT
I. The contractor shall provide all labor, materials, tools, transportation, supplies, supervision, etc. (except as noted), necessary to provide all components for a digital multimeter to the Defense Supply Center Columbus (DSCC), Columbus, Ohio. The salient characteristics of the digital multimeter are as listed below:
A. Keysight, quantity two (2) of 3458A digital multimeter Brand Name with the following salient characteristics:
1. Shall be new, not refurbished.
2. Shall be supplied with Operating manual.
3. Shall have; at least 8.5 digit precision.
4. Shall at a minimum have: Accuracy of at least 8ppm
5. Shall at a minimum have: Measurability to 1kV, 1GΩ, 1.5A peak, 2MHz
6. Shall be able to measure 2-wire and 4-wire Ohm resistance, AC voltage and current, DC voltage and current, frequency, period
7. Shall have to use front-unit input terminals and rear-unit input terminals
8. Shall have: NIST Traceable Calibration Certificate and ISO 17025 accredited calibration certificate with data and uncertainties.
9. Must be a drop-in replacement of current digital multimeter that works with custom software created by
EPTC.
10. Shall at a minimum have: Included Accessories: Power cord.
B. Required Upgrades and Accessories - Brand Name:
1. GPIB Interface.
C. Place of Performance The instrument shall be delivered to:
Defense Supply Center Columbus 300 North James Road, Bldg 17-3 Mark for: DLA Product Test Center, Bldg 11-7 (TE Lab) Attn: Kyle Palmer (kyle.palmer@dla.mil / 614-693-5055) Columbus, Ohio 43213
D. Travel (if applicable) N/A
E. Invoicing Payment of invoices will be accomplished by payment through the Defense Finance and Accounting Service.
Invoices will be submitted to the Wide Area Workflow (WAWF) system in accordance with DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports and DFARS 252.232-7006 Wide Area Workflow Payment Instructions within 10 workdays after the conclusion of each training session.
F. WAWF Acceptance DODAAC#
1. TA Lab is SL0700.
mailto:kyle.palmer@dla.mil
Rev 04/10/2024
Technical Specifications
Digital Multimeter
DLA Product Test Center, VT
G. Other Requirements:
1. Delivery: 30 days from date of the award.
2. Contractor shall give notification to Kyle Palmer (kyle.palmer@dla.mil 614-693-5055) when the instrument is ready to be delivered.
3. All shipping costs are to be included in the contracted price.
4. The instrument shall be delivered to:
Defense Supply Center Columbus 300 North James Road, Bldg 17-3 Mark for: DLA Product Test Center, Bldg 11-7 (TE Lab) Attn: Kyle Palmer (kyle.palmer@dla.mil 614-693-5055) Columbus, Ohio 43213
5. Invoices shall be submitted through Wide Area Workflow (WAWF), See DFARS Clause 252.232-7006 Wide
Area Workflow Payment Instructions for detailed instructions on how to submit invoices.
H. Points of Contact
The Government Contract Officer:
TBD
The Government Contract Officer Representative (COR):
Kyle Palmer Kyle.palmer@dla.mil
(614) 692-8860
DLA Land & Maritime Product Test Center, 3990 E. Broad St., Columbus OH, Bldg. 11, Section 7 Larry Baas (614) 693-7591
The Government Technical Representative Name: Kyle Palmer Phone #: (614) 693-5055 Email: kyle.palmer@dla.mil mailto:Kyle.palmer@dla.mil
File details come from the government source that posted it. Updated .