CMM Tech Specs.pdf

Technical Specifications

Coordinate Measuring Machine (CMM)

DLA Land and Maritime Engineering & Technical Support Directorate

DLA Product Test Center Division, Mechanical Lab, VTM

Objective:

This is a description of the DLA Product Test Center Division, Mechanical Lab, VTM, requirements for the procurement of a Coordinate Measuring Machine (CMM). It is the intent here to clearly define all required performance characteristics. In generating this statement, our objective is to end up with a CMM which expands our overall testing capability of inspecting large parts, in accuracy, efficiency, and size capability. Because we want to maximize the ease of use some of the required features listed below will be specific. Our general objective is to minimize any impact to the DLA Product Test Center

Division, Mechanical Lab, VTM, operations and our customers as a result of this procurement, especially with regards to test cycle time. This system will decrease time required to inspect large parts and remove any human errors possible with current measuring.

This will be a sole source purchase. We currently have 4 coordinate measuring machines with the OpenDMIS software. We have created hundreds of automatic CNC programs with this software and in order for the new machine to execute these programs it will need to be OpenDMIS software. Wenzel has been identified as our selection.

General Requirements:

1. Coordinate Measuring Machine must be new, not refurbished.

2. Coordinate Measuring Machine with motorized cnc drives.

3. OpenDMIS CNC measurement software.

4. Must have scanning software/hardware installed.

5. System must be “turn key” after setting up. Contractor must supply all cables, computers, monitors, stand, and software.

6. Training to be included in the purchase price. Five (5) Lab Techs will be trained one

(1) day at our facility.

7. Initial calibration to be include in the purchase price.

8. Measuring area must be a minimum of X=1500mm, Y=2000mm, and Z=1200mm.

9. Must include Renishaw PH10Mplus probe head.

10. M2 stylus kit included.

11. Able to create automatic inspection routines in the software.

12. Accuracy must be MPEe = 3.0 + L/350 microns or better.

13. Minimum 30”x30” mounting plate with ¼-20 threaded holes.

14. Must include a 42 “ monitor.

15. System must come with its own stand or desk.

16. Windows based, globally recognized OS for flexible data exporting and interface with

Windows® applications .

Warranty:

Contractor shall provide a minimum of a one-year warranty on all components from the date of installation at the DLA Product Test Center, Mechanical Lab, VTM, Bldg. 9, Columbus, OH. The warranty will include all costs for repair or replacement as required.

Calibration:

Manufacture must quote total cost of calibration (separate line item on quote).

Other Requirements:

1. Delivery: 15-18 weeks from date of the award.

2. Contractor shall give notification to Lee Shull (Lee.Shull@dla.mil/614-692-8107) when the system will be delivered and set-up date.

3. Contractor will be scheduling training with Lee Shull (Lee.Shull@dla.mil/614-692-

8107).

4. All shipping costs are to be included in the contracted price.

5. The set shall be delivered to

Defense Supply Center Columbus (DSCC)

300 North James Road, Bldg. 17-3

Mark For: DLA Product Test Center, Mechanical Lab, VTM, Bldg. 9-1

Attn: Lee Shull (Lee.Shull@dla.mil/614-692-8107)

Columbus, OH 43213-1152

6. Payment of invoices will be accomplished by payment through the Defense Finance and Accounting Service. Invoices will be submitted to the Wide Area Workflow system in accordance with DFARS 252.232-7003 Electronic Submission of Payment

Requests and Receiving Reports and DFARS 252.232-7006 Wide Area Workflow

Payment Instructions within 10 workdays after the conclusion of work performed.

Invoices shall be submitted through Wide Area Workflow (WAWF), See DFARS

Clause 252.232-7006 Wide Area Workflow Payment Instructions for detailed instructions on how to submit invoices.

7. DODAAC: SL0702.

Suggested sources:

Wenzel America Ltd

Quote WAMQ40700-C

Model LH Generation 1512 2000mm Y axis Standard Accuracy CMM

28700 Beck Rd

Wixom, MI 48393 mailto:Lee.Shull@dla.mil mailto:Lee.Shull@dla.mil mailto:Lee.Shull@dla.mil

Sales: Drew Shemenski 248-736-3105