Questions_and_Answers_Received_During_Solicitation_Phase_Solicitation_Amend__0001.pdf

Questions and Answers Received During Solicitation Phase:

Q1. The number of end of aisle protectors on the written description doesn’t match up with the drawing.

If you go by the drawing there appears to be more end of aisle protectors required than what is in the written description. Please advise on how we should quote.

A1. Quote based on what is written in the SOW.

Q2. With the existing racks being 42" deep, will you please confirm that you want the new racks to be 48" deep?

A2. 48” deep is correct.

Q3. The layout drawing shows rows of 104' 6". Will you confirm that the rows required for the new racking is to be 105' and not 104' 6"?

A3. 105’ shall be quoted. However, if a rack is exceeding the length constraints a section may be removed at the time of installation.

Q4. Paragraph 3.1 states that there are to be (33) rows of 105'. The layout drawing shows (34) rows of 104' 6".

Will you confirm that you are asking for (33) rows or 105' and not (34)?

A4. 105’ shall be quoted.

Q5. In paragraph 3.1, when discussing row spacers, it is stated that 15 rows at 105' are to get 8" spacers and that

(1) row at 42' is to get 24" spacer. Row spacers are typically used for back-to-back rows, so having spacers for 15 rows and 1 row are odd numbers. Will you please confirm?

A5. Quote based on what is written in the SOW. The space may be for a wall spacer.

Q6. It is stated in 3.1 that for 8 rows, wall anchors are required, yet the drawings does not show any racks against walls. Will you please clarify?

A6. Quote based on what is written in the SOW.