Attachemnt 1_Performance Work Statement_Fort Meade_Contract Renewal_27-BE-025_v11.6.26.docx
DOCX document 173 KB Posted
- Attached to
- Fort Meade Hazardous Waste Disposal Contract
- Solicitation number
- SP450027F0004
- Issued by
-
Defense Logistics Agency
About this file
This is a Performance Work Statement (PWS) for the Fort George G. Meade Regional Hazardous Waste Disposal Contract, establishing requirements for removal, transportation, and disposal of hazardous and non-hazardous waste at military installations and locations within a 50-mile radius of service locations in Maryland, Virginia, Delaware, and the District of Columbia.
The contract covers RCRA hazardous wastes, non-RCRA wastes, universal wastes, compressed gases, polychlorinated biphenyls (PCBs), aqueous film-forming foam (AFFF), per- and polyfluoroalkyl substances (PFAS), batteries, corrosive materials, reactive wastes, and toxic wastes. Excluded items are infectious medical waste, DEA controlled substances, radioactive waste, and ammunition/explosives. The PWS is structured as an indefinite delivery/indefinite quantity (IDIQ), firm-fixed-price performance-based contract with one 30-month base period followed by one 30-month option period. Standard removal times are 15 business days for containerized waste and 5 business days for bulk waste. Pricing is based on container sizes for containerized waste and gallons, pounds, or cubic yards for bulk waste. The contract includes special services such as industrial cleaning services (ICS), equipment rentals (rolloff boxes, vacuum boxes, frac tanks), lab packing/loose packing, overpacking, waste characterization, analysis, and expedited removal options (1-business-day through 10-business-day timeframes). Contractor personnel must meet DOT, EPA, and OSHA training requirements. The contract includes specific security protocols for various installations, including DBIDS enrollment for Department of Defense facilities, advance notification requirements (ranging from 24 hours to 30 business days depending on location), and citizenship requirements for certain facilities such as NSA Fort Meade and AEDC White Oak. Minimum task order charges are $1,500 unless otherwise specified. The government will ensure waste is properly packaged, marked, and labeled per DOT and EPA regulations prior to removal, and the contractor must verify compliance and provide appropriate personal protective equipment and material handling equipment. The contract includes acceptable performance level (APL) requirements with potential for monetary deductions and negative past performance marks for non-compliance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachemnt 3_Pickup and Service Locations_Fort Meade_Contract Renewal_27-BE-025_v11.6.26.xlsx | XLSX spreadsheet | |
| Attachemnt 2_Price Schedule_Fort Meade_Contract Renewal_27-BE-025_v11.6.26.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fort George G. Meade Regional Hazardous Waste Disposal Contract v.11.6.26 (CKV)
Table of Contents
INTRODUCTION TO THE PERFORMANCE WORK STATEMENT (PWS)
1.0 REMOVAL PHASES
1.1 PRE-REMOVAL
1.1.1 CONTRACT LINE-ITEM NUMBER (CLIN) SELECTION CRITERIA
1.1.1.1 CLIN DISPUTES
1.1.2 PERMIT/SPECIAL REQUIREMENTS
1.1.2.1 REPORTING REQUIREMENTS
1.1.3 SHIPPING/DISPOSAL DOCUMENTATION
1.1.4 NOTIFICATIONS
1.1.5 CONVEYANCE VEHICLE OR TRAILER SECURITY
1.1.6 HOURS OF OPERATION
1.1.7 CONTRACT RELATED INFORMATION DISCLOSURE
1.1.8 DEFENSE BIOMETRIC IDENTIFICATION SYSTEM (DBIDS) INSTALLATION ACCESS
1.1.9 TREATMENT STORAGE DISPOSAL FACILITY (TSDF) CLOSURES AND OUTAGES
1.1.10 CONTRACTOR PERSONNEL
1.1.11 ADDING CONTAINERIZED WASTE TO ISSUED TASK ORDERS
1.1.12 PACKAGING, MARKING, LABELING, AND PLACARDING
1.2 REMOVAL
1.2.1 SPILL RESPONSIBILITY
1.2.2 SEGREGATION OF HAZARDOUS WASTE
1.2.3 CONTAINERS & SPECIAL PACKAGING
1.2.4 GOVERNMENT EQUIPMENT & PERSONNEL
1.2.5 TREATMENT OF HAZARDOUS WASTE ON GOVERNMENT FACILITIES
1.2.6 LOADING
1.2.7 WEIGHING OF ITEMS
1.2.7.1 TASK ORDER (TO) ADJUSTMENTS
1.2.8 DEFINITIONS, BULK & CONTAINERIZED WASTE
1.2.8.1 BULK WASTE
1.2.8.2 CONTAINERIZED WASTE
1.2.9 BULK LIQUID PUMPING
1.2.10 BULKING & CONSOLIDATION
1.2.11 EXPEDITED REMOVAL/PERFORMANCE OF SERVICES
1.3 POST REMOVAL
1.3.1 RETURN OF SHIPPING DOCUMENTATION
2.0 DISPOSAL/RECYCLING
2.1 CERTIFICATES OF DISPOSAL, DESTRUCTION, & RECYCLING
2.1.1 EMPTY CONTAINERS
2.2 LITHIUM BATTERIES
2.3 POLYCHLORINATED BIPHENYLS (PCB) RELATED WASTES
2.4 AQUEOUS FILM-FORMING FOAM (AFFF) AND OTHER POLYFLUOROALKYL SUBSTANCES (PFAS) RELATED WASTES
2.5 COMPRESSED GAS CYLINDERS, CARTRIDGES, VESSELS & CANISTERS
2.5.1 EVALUATION/IDENTIFICATION OF CYLINDERS/VESSELS/ CANISTERS
2.5.2 ANALYSIS TO IDENTIFY CYLINDER CONTENTS
2.5.3 ZONE “A” POISON GASES
2.5.4 TRANSPORTATION OF CYLINDERS TO ODS RESERVE, RICHMOND, VA
2.6 RECYCLING OR RECOVERY
2.6.1 COMMODITY SPECIFIC RECYCLING/RECOVERY REQUIREMENTS
2.7 DEMILITARIZATION
2.7.1 SUBMARINE TILES
2.7.2 OTHER MILITARY ITEMS
3.0 SPECIAL SERVICES
3.1 RENTAL EQUIPMENT SUMMARY – ROLLOFF BOX (ROB), VACUUM BOX, OR FRAC TANK
3.2 DAILY RENTAL OF A LINED ROB WITH COVER
3.3 WEEKLY RENTAL OF A LINED ROB WITH COVER
3.4 MONTHLY RENTAL OF A LINED ROB WITH COVER
3.5 ANNUAL RENTAL OF A LINED ROB WITH COVER
3.6 DAILY RENTAL OF A VACUUM BOX
3.7 WEEKLY RENTAL OF A VACUUM BOX
3.8 WEEKLY RENTAL OF A FRAC TANK WITH SECONDARY CONTAINMENT
3.9 MONTHLY RENTAL OF A FRAC TANK WITH SECONDARY CONTAINMENT
3.10 INITIAL PLACEMENT OR REMOVAL OF EMPTY RENTED ROB OR VACUUM BOX
3.10.1 MOVE EMPTY ROB, VACUUM BOX, OR FRAC TANK WITHIN INSTALLATION
3.11 INDUSTRIAL CLEANING SERVICES (ICS), DAILY, CREW OF 2
3.12 INDUSTRIAL CLEANING SERVICES (ICS), WEEKLY, CREW OF 2
3.13 INDUSTRIAL CLEANING SERVICES (ICS), DAILY, CREW OF 3
3.14 INDUSTRIAL CLEANING SERVICES (ICS), WEEKLY, CREW OF 3
3.15 SURCHARGE FOR WEEKEND WORK, DAILY, CREW OF 2
3.16 SURCHARGE FOR WEEKEND WORK, DAILY, CREW OF 3
3.17 ADDITIONAL CHARGE FOR HYDRO/WATER BLASTING WORK, DAILY, CREW OF 3
3.18 SURCHARGE FOR EXPEDITED COMMENCMENT OF ICS WORK, CREW OF 2 OR 3
3.19 ADDITIONAL CHARGE FOR PERMIT-REQUIRED CONFINED SPACE WORK, DAILY, CREW OF 3
3.20 ADDIONAL CHARGE FOR SUPPER VAC TRUCK WORK, DAILY, CREW OF 3
3.21 TEMPERATURE-CONTROLLED ORGANIC PEROXIDE OVERPACK SYSTEM
3.22 PERFORM ANALYSIS
3.23 PREPARE WASTE PROFILE SHEET
3.24 PERFORM WASTE CHARACTERIZATION TO IDENTIFY WASTE & PROVIDE A HWPS
3.25 PERFORM OVERPACKING/LOOSE PACKING SERVICES
3.26 PERFORM LAB PACKNG SERVICES
3.27 BULK NON-RCRA WASTEWATER
3.28 DENTAL AMALGAM
3.29 RCRA/NON-RCRA CHARACTERISTIC WASTE CONTAINING TRACE- LEVEL EXPLOSIVES
3.30 PRESSURIZED-FOR-USE CONTAINERS THAT ARE NOT COMPRESSED GAS CYLINDERS
3.31 HYBRID BID SCHEDULE AND CLIN SUFFIX DIRECTIVES
3.32 ADDITIONAL CHARGE FOR MANDATORY INCINERATION OF LAB AND LOOSE PACKS
3.33 PREPARE/RE-CONTAINERIZE AMMONIUM PERCHLORATE RELATED WASTE FOR RCRA INCINERATION
4.0 ACCEPTABLE PERFORMANCE LEVEL (APL)
4.1 APL TABLE
5.0 QUALIFIED FACILITIES AND TRANSPORTERS LISTS (QFL/QTL)
5.1 ADDING/UPDATING QUALIFIED FACILITIES AND TRANSPORTERS
5.2 FACILITY REMOVAL
5.3 TRANSPORTER REMOVAL
6.0 ADDITIONAL REQUIREMENTS
6.1 INDEMNIFICATION
6.2 PLACES OF GOVERNMENT INSPECTION
6.3 CONTRACTOR REPRESENTATIVE
6.4 INCIDENTAL FEES
7.0 STANDARD TIMES FOR WASTE REMOVALS AND PROVISION OF OTHER SERVICES
7.1 EXPEDITED REMOVALS AND PERFORMANCE OF SERVICES
8.0 DOCUMENTATION REQUIREMENTS, DLA DISPOSITION SERVICES ACCEPTANCE, INVOICING, AND TRACKING
8.1 SUBMISSION OF DOCUMENTATION TO FACILITATE ACCEPTANCE FOR PAYMENT
8.2 ACCEPTANCE AND INVOICING
9.0 CONTRACT MINIMUM/MAXIMUM
10.0 CONTRACTOR ACCESS TO PERFORMANCE LOCATIONS
10.1 CONTRACTOR PERSONNEL SECURITY REQUIREMENTS
10.2 CAC ISSUANCE AND ACCOUNTABILITY PROCEDURES
10.3 CONTRACTOR CAC REPORTING REQUIREMENTS
10.4 CAC SECURITY COMPLIANCE
11.0 PERIOD OF PERFORMANCE
INTRODUCTION OF THE PWS
a. This contract is referred to as the Fort Meade Regional Hazardous Waste Disposal Contract. Work will consist primarily of the removal, transportation, and disposal of Resource Conservation and Recovery Act (RCRA) hazardous wastes, non-RCRA wastes, State-Regulated wastes, Non-State Regulated wastes, Universal Wastes, Compressed Gases, Polychlorinated Biphenyls (PCBs), and Per- and Polyfluoroalkyl Substances (PFAS) located on or around military installations or within a 50-mile radius of any pickup/service location listed on the Pickup and Service Locations Table (See Attachment 3) of the contract in the states of Maryland, Virgina, Delaware, and the District of Columbia. Infectious Medical Waste, Drug Enforcement Administration (DEA) Controlled Substances, Radioactive Waste, Ammunition and explosives, will not be included under this contract. The Contractor is advised that some requirements for information may be required before start of work on this contract per Sections 1.1.8, 1.2.1, and 5.1.
b. The standard removal time for containerized waste under this contract is (15) business days, and for bulk waste is five (5) business days. The contract consists of one (1) 30-month Base Period, followed by one (1) 30-month Option Period.
c. Pricing for containerized waste will most commonly be based on container sizes; pricing for other containers is weight-based. Pricing for bulk wastes will most commonly be based on gallons, pounds, or cubic yards, as applicable.
d. This contract is a firm-fixed price indefinite delivery/indefinite quantity (IDIQ) contract written as a performance-based contract and allows the Contracting Officer (KO) to make monetary deductions and/or a negative mark on the Contractor’s Past Performance when an Acceptable Performance Level (APL) is not met.
e. The Government shall ensure that all items placed on a TO under this contract are packaged, marked, and labeled in accordance with (IAW) all applicable local, state, and federal laws and regulations relating to the generation, storage, and transportation of waste.
f. The Contractor shall provide all services necessary for the transportation, final treatment and disposal of the items listed in the price schedule IAW all local, state, and federal laws and regulations, and the terms and conditions of this contract. These services shall include all necessary personnel, including subcontractors, labor, transportation, equipment, and the preparation, compilation, and submission of all documentation required by this contract. All items, regardless of the condition, are being discarded by the Government and will require treatment and disposal of the waste identified by the ordered CLIN descriptions.
g. The six-character disposal CLIN consists of two parts. The term “Base CLIN” refers to the first four characters of the CLIN. The Base CLIN represents the waste category or series according to the waste profile for a particular waste stream. The term “CLIN Suffix” refers to the last two characters of the CLIN. The CLIN Suffix designates the unit of measure for purposes of tracking and Contractor payment. For example, Base CLIN “FL16” represents “Non-Reactive paints and other coatings listing isocyanates, amines, or other polymerizable components in the ingredients” and CLIN Suffix “C4” designates the unit of measure as container up to 55-gallons in size. As such, one (1) 55-gallon drum of this waste would be represented by ordering one (1) each of CLIN FL16C4. General information regarding Profile Based CLINs may be found at the link below:
http://www.dla.mil/DispositionServices/Offers/Disposal/HazardousWaste/HazWasteDisposal.aspx
h. Some CLINs ordered under this contract require the Contractor to provide Certificates of Destruction or Disposal (CD), e.g., specific Demilitarization-required items, Aqueous Film-Forming Foam (AFFF), PFAS, and PCB-related wastes. The Contractor is cautioned to closely read all CLIN descriptions where such requirements are indicated. Unless explicitly written elsewhere in this PWS, the Contractor must only provide a CD when so reflected in the Price Schedule CLIN description and IAW Section 2.1.
i. Publications and attachments applicable to this contract will be made available upon request. During the solicitation and life of this contract, the Government may make requirement changes, additions, and/or deletions to those initially identified.
j. Industrial Cleaning Services (ICS) CLINs, when offered under this contract, require Contractor provision of all labor and equipment necessary to perform these services as specified under Section 3.0, Special Services.
k. Generators are responsible for ensuring that their containerized waste sent for disposal via this contract is in proper Department of Transportation (DOT) shipping containers.
l. Minimum TO charges under this contract will be $1,500.00 except where otherwise specified in the contract, including but not limited to various special services and expedited removals.
m. Required time frames for Contractor performance of services including waste removal are expressed in business days. For timekeeping purposes in the performance of services, the day in which the TO is issued to the Contractor will constitute “Day 0” (zero), and the following business day will constitute “Day 1”. All business days thereafter, whether in whole or in part, will constitute one (1) day for timekeeping purposes. A business day will be defined as any day in which normal business is conducted. It does not include weekends, federal holidays, or other days in which the Contractor is denied installation access due to force protection or other conditions.
n. Time frames pertaining to equipment rental periods are expressed in calendar days. For timekeeping purposes related to equipment rental, the day of equipment placement, regardless of time, will constitute “Day 0” (zero), and the following calendar day will constitute “Day 1”. All subsequent calendar days thereafter, whether in whole or in part, will constitute one (1) day toward the ordered rental period. For purposes of this contract, a calendar day will be defined as every day of the calendar year.
o. For purposes of this contract, the term Treatment, Storage, and Disposal Facility (TSDF) shall include recycling facilities.
p. In this contract, "Department of Defense (DoD)" and "Department of War (DoW)" are interchangeable terms that refer to the same entity. References to DoD or DoW installations also include their activities, such as remote training sites.
1.0 REMOVAL PHASES
The requirements for removal of waste under this contract are divided into three main phases: Pre-Removal (1.1), Removal (1.2), and Post-Removal (1.3). The Contractor and their Subcontractors must always perform in a prudent, conscientious, safe, and professional manner. The Contractor shall ensure that its agents, employees, and Subcontractors involved in handling and packaging the hazardous waste be trained for the level of expertise required for the proper performance of the task and in the areas of chemical incompatibility, general first aid and spill response procedures. The Contractor is required to provide only non-powered Material Handling Equipment (MHE) to move containers but has discretion to provide powered MHE if deemed advantageous to the Contractor. Refer to Section 1.2.6 for additional information. The Contractor shall provide appropriate Personal Protective Equipment (PPE) to Contractor and/or Subcontractor personnel to safely handle, move, and load wastes. The Contractor agrees that all personnel and equipment used in the performance of this contract are subject to safety inspections by Government personnel while on federal property.
1.1 PRE-REMOVAL
1.1.1 CLIN SELECTION CRITERIA
CLINs are assigned to waste streams by the Government and are designed around Resource Conservation and Recovery Act (RCRA) regulations, treatment, and disposal technology standards. DOT regulations, including Proper Shipping Name (PSN) and Hazard Class are not a basis for CLIN selection. The waste description, generation process, physical state, and EPA Waste Code(s) are the primary considerations for CLIN selection. CLIN selection begins with the identification of a Base CLIN category and sequence number. It is selected, if available, from the Price Schedule, and is completed with the assignment of a CLIN Suffix.
a. Base CLIN categories and their descriptions used for waste disposal CLINs under this contract are as follows:
(1) Batteries (BA) – Used for all battery types, some, or all of which may be turned in as Universal Waste (UW) where no EPA Waste Codes are assigned, or as Hazardous Waste (HW), where applicable EPA Waste Codes are assigned.
(2) Corrosives (CS) – Used for all corrosive wastes meeting the EPA definition of corrosive and carrying the EPA Waste Code D002, unless it is a Lab Pack/Loose Pack, or unless the waste is concurrently assigned a D001 (ignitable) or D003 (reactive) Waste Code. Some corrosive acid oxidizers may carry the D001 Waste Code and be assigned a CS CLIN.
(3) Compressed Gas Cylinders/Cartridges/Vessels (CY) – Used for all types of compressed gas cylinders, vessels, canisters, and cartridges. Base CLINs are assigned based on the specific chemical name of the gas or gases comprising the contents of the cylinder, vessel, or canister. Cartridges are assigned Base CLINs based on whether the gas is flammable or inert.
(4) Flammable/Combustible/Ignitable (FL) – Used for all ignitable and other than reactive or corrosive oxidizers carrying the D001 Waste Code, unless it is a Lab Pack or Loose Pack or unless the waste is concurrently assigned a D003 (reactive) Waste Code. FL CLINs may also be assigned to waste streams not carrying the D001 Waste Code but containing flammable/combustible/ignitable constituents such as organic solvents or chemicals.
(5) Lab Packs/Loose Packs (LP) – Used for most overpacked small containers of chemicals and consumer commodity-type products. “Lab Pack” refers predominantly to the overpacking of multiple containers of like laboratory chemicals into a single outer container. The chemicals must be of the same DOT hazard class, and a detailed inventory must be affixed to the outer container. Lab packing is a packaging method performed by the Contractor (or subcontractor) under a separate service CLIN. “Loose Pack” refers predominantly to the overpacking of multiple containers of like consumer commodity products (e.g., paints, lubricants, expired products, etc.) into a single outer container and does not require the preparation of a detailed inventory. Generators of this waste may be authorized to loose-pack containers for turn-in. Lab-packed and loose-packed drums and boxes containing smaller containers of same type wastes provide the best alternative when consolidation is impractical. For purposes of disposal, Lab Packs and Loose Packs share the same Base CLIN depending upon the contents of the inner containers and their assigned EPA Waste Code(s) when applicable.
(6) Non-RCRA, Non-State and State-Regulated (NR) – Used for wastes that are not deemed hazardous under the United States Environmental Protection Agency (USEPA) Resource Conservation and Recovery Act (RCRA) regulations and carry no USEPA Waste Code(s). Some such wastes may be State regulated and may carry state-specific Waste Code(s). The Contractor is required to comply with state regulations, as applicable, in the management of such non-RCRA hazardous wastes.
(7) PCB-Related (PC) – Used for all wastes containing or contaminated by a source of PCBs that is equal to or greater than 50 parts per million (ppm) and regulated under the Toxic Substances Control Act (TSCA). Some Generators of PCB-related wastes may choose to utilize “PC” Base CLINs, even when PCB concentrations fall below regulatory thresholds. Additionally, some states regulate PCB-related wastes to a concentration threshold that is lower than 50 ppm. The Contractor is required to comply with state regulations, as applicable, in the management of such PCB-related wastes.
(8) PFAS-Related (PF) – Used for various wastes containing or contaminated by a source of PFAS including some AFFF wastes that may or may not be regulated under the RCRA and/or the TSCA. Some Generators of PFAS-related wastes may choose to utilize “PF” Base CLINs, even when PFAS concentrations fall below regulatory thresholds. Some states regulate PFAS-related waste to a lower concentration threshold than others. The Contractor is required to comply with state regulations, as applicable, in the management of such PFAS-related wastes. RCRA-regulated waste containing PFAS are managed under CLINs according to their assigned EPA Waste Code(s). DOD policy may dictate specific treatment and/or disposal technologies that are both state and federally compliant. Generators will assign disposal CLINs accordingly.
(9) Recycle/Recovery (RE) – Used for various wastes that require by contract and/or regulation the recycling/recovery of constituents and/or components contained in the waste stream, including some universal wastes, lamps, high mercury devices and residues, antifreeze, used oil, oil filters, and fully drained fuel filters. When “RE” CLINs are ordered, the Contractor is required to recycle/recover the waste under which the CLIN was ordered.
(10) Reactive (RX) – Used for various reactive wastes bearing the D003 Waste Code or potentially bearing reactive characteristics. All wastes bearing the D003 Waste Code will be turned in for disposal using an “RX” or appropriate “LP” Base CLIN, except for waste also contaminated by a source of PCBs that is equal to or greater than 50 ppm.
(11) Toxic (TX) – Used for various toxic wastes that are not ignitable, corrosive, or reactive waste bearing the D001, D002, or D003 Waste Codes, apart from hexavalent chromium related waste bearing the D001 Waste Code exclusively due to Cr+6 oxidizing properties.
b. CLIN selection criteria are further based upon information found in the waste profile sheet to include the waste description, physical state of the waste, and the assignment of EPA Waste Code(s) to RCRA-regulated HW. Every Base CLIN offered to Generators for use in the Price Schedule has corresponding permissible EPA Waste Code(s), unless the CLIN is for non-RCRA regulated waste. Permissible Waste Codes for purposes of this contract are those EPA Waste Code(s) identified in the CLIN descriptions on the Price Schedule of this contract. Permissible Waste Codes does not imply that any or all those waste codes will apply, but that no other waste code(s) may apply to waste streams assigned to that CLIN. CLINs showing D009* with the asterisk (*) as a permissible waste code must meet restrictions shown in Section 2.3 of this PWS. Furthermore, the term “Listed" for purposes of this contract does not imply that all EPA Listed Waste Codes may apply. Uncommon EPA Listed Waste Codes may be handled on a case-by-case basis, with consideration given to those Waste Codes that are permitted and accepted by the Contractor’s Treatment, Storage and Disposal Facility (TSDF) of choice. The Government will ensure that all waste being turned in for removal will carry only EPA Waste Code(s), if any, which are listed as permissible in the Price Schedule. The Government is responsible for assigning proper profile-based CLINs to every waste stream being turned in for removal. See Master Base CLIN Catalog at the below link.
http://www.dla.mil/DispositionServices/Offers/Disposal/HazardousWaste/HazWasteDisposal.aspx Some waste streams may fit under more than one CLIN. A CLIN is generally authorized for use by the Government when the subject waste meets the waste description, physical state, and permissible EPA Waste Codes, as specified for that CLIN in the contract. Base CLINs will be selected using the following Waste Codes and other descriptions as the order of precedence:
(1) PCB-Related, Containing or Contaminated by a Source >50 ppm (regulation varies by state)
(2) Reactive (D003)
(3) Ignitable/Oxidizer (D001), other than Cr+6 related waste bearing the D001 Waste Code exclusively due to the oxidizing properties of Cr+6.
(4) Corrosive (D002)
(5) Toxic (D004-D043 and any additional D-Codes newly established by EPA)
(6) Acutely Hazardous (P-Listed)
(7) Leachate (F039)
(8) Electroplating-Related (F006-F012, F019)
(9) Spent Solvent (F001-F005)
(10) Other F-Listed
(11) U-Listed
(12) K-Listed
(13) Non-RCRA, PFAS-Related Wastes
(14) Non-RCRA, State-Regulated Waste
(15) Non-RCRA, Non-State Regulated Waste
c. Base CLIN sequence number – Refer to the Master Disposal CLIN Catalog.
d. CLIN Suffix – Refer to the following CLIN Suffix Table:
CLIN Suffix Table
Containerized Wastes
| CLIN Suffix→ |
| C1 |
| C2 |
| C3 |
| C4 |
Container Size:
Type:
Up to 5 Gal
(DM/DF)
Up to 15 Gal
(DM/DF)
Up to 30 Gal
(DM/DF)
Up to 55 Gal
(DM/DF)
| Unit of Issue: |
| EA |
| EA |
| EA |
| EA |
| CLIN Suffix→ |
| C5 |
| C6 |
| C7 |
| C8 |
Container Size:
Type:
Up to 110 Gal
(DM/DF)
| Pallet, CYB, or Tri-Wall Box |
| Containerized Pounds |
| Containerized Kilograms |
| Unit of Issue: |
| EA |
| EA |
| LB |
| KG |
Pumpable Liquid Wastes Removed in Totes / IBCs
| CLIN Suffix→ |
| T1 |
| T2 |
| T3 |
Container Size:
Type:
Up to 220 GL 850 Liters
(TP)
Up to 275 GL 1,050 Liters
(TP)
Up to 330 GL 1,250 Liters
(TP)
| Unit of Issue: |
| EA |
| EA |
| EA |
Bulk Solid & Liquid Wastes
| CLIN Suffix→ |
| B1 |
| B2 |
| B3 |
| B4 |
| Bulk Load Description |
| Bulk Heavy Solids (>600 lbs./Yd3) |
Priced per Lb., Based on Bulk Loads that are…
| Up to 10,000 lbs. |
| 10K up to 20K lbs. |
| 20K up to 30K lbs. |
| >30,000 lbs. |
| Unit of Issue: |
| LB |
| LB |
| LB |
| LB |
| Notes: |
| Weights shown above are net weights of actual waste per bulk load. |
Not to be used for lightweight solids weighing less than 600 lbs./yd3.
| CLIN Suffix→ |
| B5 |
| B6 |
| Bulk Load Description: |
| Bulk Pumpable Liquids |
Removed via Vac Truck or Tanker Bulk Solids Lightweight (<600 lbs./Yd3) Remove via ROB
| Unit of Issue: |
| Gallons |
(GL)
Cubic Yards
(CD)
| Minimum Load Ordered: |
| 1,500-Gallons |
| 75% of |
ROB Capacity
Compressed Gas Cylinders (Sizes do not include valve or handle.)
| CLIN Suffix→ |
| ME |
| M1 |
| M2 |
| M3 |
| Size Category: |
| Lecture |
| Small |
| Medium |
| Large |
| Size Up To: |
| 3" x 12" |
| 4" x 24" |
| 12" x 36" |
| 16" x 56" |
| Unit of Issue: |
| EA |
| EA |
| EA |
| EA |
CLIN Suffix ME (Miscellaneous, Each) also has applications for other than compressed gases.
e. Recycle/Recovery Base CLINs beginning with “RE” are designated for mandatory recycling/recovery by the Government. If the Contractor asserts that a waste designated for recycling cannot be recycled because it does not meet the required recycling parameters:
(1) The Contractor must notify the KO in writing of the rationale and proof for waste rejection at least five (5) business days before pickup. This must include written input from at least two recycling facilities listed on the Qualified Facilities List (QFL), at least one of which is not owned by the Contractor.
(2) The KO will notify the Contracting Officer Representative (COR) to resolve requests to change the assigned mandatory recycling CLIN to the appropriate disposal CLIN. The final decision to change a mandatory recycling CLIN to a disposal CLIN is solely that of the Government. If the Government agrees with the CLIN change, the applicable disposal CLIN will be assigned.
1.1.1.1 CLIN DISPUTES
a. CLIN discrepancies noted on a TO either before or during a removal by the Contractor will be addressed immediately via the COR and the Generator. If the COR and the Generator concur with the CLIN change request, a TO Modification will be issued.
b. The Government may unilaterally issue TO modifications for such reasons as quantity changes, noun description changes, CLIN changes, adding/deleting TO lines, extending TO end dates, etc. The Contractor will be paid for the actual items and quantities removed per the awarded contract price schedule. If upon receipt of a unilateral TO modification, the Contractor does not agree with the change or changes, the Contractor reserves the right to seek resolution with the KO. These modifications are only against TOs. No changes are made to the terms and conditions of the contract.
c. If the Contractor asserts after removal that an inappropriate CLIN has been assigned, the burden of proof lies with the Contractor. The Contractor must provide documentation electronically to the KO and COR within 10 business days from the TSDF receipt date supporting the assertion through independently acquired laboratory analysis at the Contractor’s expense, TSDF fingerprinting results, Safety Data Sheet, and/or other written supporting documentation such as a TSDF “off-spec” notification. Requests for a CLIN change without supporting documents will not be accepted. After review of the documentation, the Contractor will be notified by the KO of the Government’s final determination.
d. The Contractor must ensure the waste in question is not treated or disposed before the Government has made a final CLIN determination. If the subject waste has been treated or disposed of prior to the Government’s final determination, the Contractor will be deemed to have waived its objection to the CLIN assignment.
1.1.2 PERMIT/SPECIAL REQUIREMENTS
a. Without additional expenses to the Government, the Contractor shall be responsible for paying all fees, preparing, or obtaining any necessary licenses, permits, notifications, waste profiles, or reports, which result from a Contractor’s transportation, recycling, treatment, or disposal decision. This includes any fees associated with requirements of the EPA national electronic manifest (e-Manifest) system. This includes acquiring any required permits or registrations necessary to operate on any installation listed in this contract and completing the Notification of Regulated Waste Activity form for the Generator(s) of hazardous waste to sign and file with the applicable state regulators for waste disposal if required. This also includes signing (on behalf of the Government) waste profiles requested by the TSDF. All Contractor-signed waste profile sheets shall be written for the actual waste stream using the Generator’s profile for backup documentation. All Generator forms or other means of notifications including correspondence with federal or state agencies on behalf of a Generator must be coordinated with and concurred with by the affected Generator prior to submission to any federal or state agency. A copy of all forms and relevant documentation, including correspondence, shall be provided to the COR.
b. The Contractor may be required to attend special training, seminars, instructions, classes, safety orientations, etc., provided by the Government or to provide information to perform work or gain access to the installation. Example: pass and ID requirements, antiterrorist training, Environmental Management System (EMS) policies, and/or forklift training.
c. The Contractor and any subcontractor(s) shall use only the facilities and transporters currently (at the time) listed in the Defense Logistics Agency Disposition Services (DLADS) Qualified Facilities List (QFL) and Qualified Transporters List (QTL), per Section 5.0.
d. Any import or export shipment outside the United States must comply with all international agreements and all applicable foreign laws. For Importation of waste into Canada the Contractor must complete a transport manifest, submit a permit application before shipping, and a confirmation of disposal or recycling after final disposal. The Contractor is required to provide a current copy of the Acknowledgment(s) of Consent to the COR and the Generator with each TO/manifest.
e. The Contractor will not ship waste outside of the United States to circumvent Environmental Protection Agency (EPA) Land Disposal Restrictions (LDR) unless domestic treatment capability does not exist or domestic facilities are unable to meet EPA LDR requirements within the United States (e.g., Lithium batteries). Mercury wastes (>260 mg/kg) subject to the EPA’s Mercury Export Ban Act (MEBA) of 2008 will not be exported outside the United States.
1.1.2.1 REPORTING REQUIREMENTS
a. If the Contractor uses a TSDF which requires the Generator(s) of hazardous waste to register with an out-of-state hazardous waste management facility prior to utilizing the facility, the Contractor must adhere to the requirements of Section 1.1.2.
b. The Contractor shall prepare and provide a Summary Manifest Report, including the completed manifest documents, to the Generator via the COR for filing with the State regulatory office(s). This Summary Manifest Report will be provided in sufficient time to allow the Generators to file the reports within the time frames allotted by each state. The required time frame will be established and documented when the Notification of Regulated Waste Activities form is submitted to the Generator via the COR, per Section 1.1.2.
c. The content of this Summary Manifest Report will be in accordance with the regulations of the state requiring the report.
1.1.3 SHIPPING/DISPOSAL DOCUMENTATION
a. All references to manifests in this contract refer to the appropriate shipping documents. The Contractor shall use only a Non-Hazardous Waste Manifest or a Uniform Hazardous Waste Manifest for shipments of waste under this contract. Bill of Lading (BOL) documents are prohibited for use under this contract. Some states may require the use of state-specific waste codes and/or have unique requirements regarding the use of manifests. The Contractor will comply with all such state requirements in the performance of this contract. Prior to removal from a site identified as a pickup point in this contract, completed copies of all manifests and LDR notifications shall be furnished to the DLADS Field Activity coordinating the waste disposal at least five (5) business days prior to removal of containerized wastes and two (2) business days prior to removal of bulk wastes. All documentation shall be clearly marked with the name of the servicing DLADS Field Activity in addition to the Generator, contract, and TO number, as applicable. Emergency response information and 24-hour emergency phone numbers shall be listed on the manifest. If blocks for emergency information are not provided, this information shall be placed in the upper right-hand corner of each document.
c. Electronic Manifest System (e-Manifest System): Generators may continue to use paper manifests during their transition to fully electronic manifests in the e-Manifest System and the phase out of paper manifests. If presented with paper documents, the Contractor will provide the Generator with a paper copy of the manifest signed by the initial transporter.
d. The use of mock EPA identification (ID) numbers:
(1) When adding a TSDF to the Qualified Facility List (QFL), a unique mock EPA ID number will be created by DLA Disposition Services for:
(a) Any non-RCRA TSDF within United States (US) territories (CONUS, AK, HI, GU, and PR) and,
(b) Any TSDF located outside of United States territories (OCONUS). Some states have issued EPA IDs to TSDFs outside US territories to track HW shipments. In these scenarios, mock EPA IDs will not be created to replace the state issued EPA ID.
(2) When adding transporters to the Qualified Transporter List (QTL), a unique mock EPA ID number will be created by DLA Disposition Services for any “non-regulated only” transporter within the United States and its territories, and for any transporter located outside the United States and its territories.
(3) Mock EPA ID numbers for TSDFs and transporters will be used on DLA Form 2505 Invoice (See Attachment 5), when submitted to DLA for invoicing purposes.
(4) Mock EPA IDs for TSDFs and transporters must be entered on manifests. Regulations may dictate where the mock ID number will be entered on a manifest. Example: When exporting from US territories, 40 CFR section 262.83(c) requires only the destination company name and address to be used in block 8 of the Uniform Hazardous Waste Manifest (EPA Form 8700-22) when the export destination does not have an EPA ID. In this scenario, the mock EPA ID number will be entered in Block 14, “Special Handling Instructions and Additional Information.”
(5) The format for mock EPA ID numbers for Conditionally Exempt Small Quantity Generators (CESQG) and Very Small Quantity Generators (VSQG) shall be State abbreviation + Pick-up DoDAAC + “SMAL”, e.g., FLSY2314SMAL.
e. The “Universal Waste” Rule, 40 CFR § 273, does not require the use of a hazardous waste manifest to ship Universal Waste (UW) within, to, or through a state that has adopted the Universal Waste Rule, in which case, under this contract, a non-hazardous waste manifest may be used. Whenever UW is transported from, to, or through a state that has not adopted the rule, a hazardous waste manifest will be used. The Contractor will specify on the manifest in the “Special Handling Instructions and Additional Information” (or equivalent) block when UW is being transported (e.g., “Universal Waste Shipment”). Shipments of UW must comply with the requirements specified in 40 CFR § 273.18 and 273.38. UW includes but is not limited to batteries, pesticides, mercury containing equipment, and lamps as defined in 40 CFR § 260.10. It may also include state-regulated UW such as antifreeze, paint, and paint-related waste (PPRW), cathode ray tubes (CRTs), electronics, and aerosol cans. The regulations allow the Generator to make the determination about whether to handle these and other specific wastes as UW or as HW per 40 CFR. The Contractor will be advised on the TO if these wastes are to be handled as “Universal Waste”.
Note: While Generators have the option to manage some waste streams as UW, Generators under this contract may be required to order disposal/recycling CLINs that provide for the proper treatment and disposal of waste based on the waste characteristics if it were otherwise managed as a HW.
(1) Example: UW aerosol cans that would otherwise carry corrosive (D002) or reactive (D003) EPA Waste Codes, will be ordered under CLINs CS15C7 and RX01C7, respectively, and NOT under CLIN FL01C7, even when managed and turned in as UW with no EPA waste codes under state and/or federal regulations. This is because corrosive and reactive waste cannot typically be processed using fuels blending technologies for energy recovery as hazardous waste derived fuels. Generators are urged to segregate their aerosol cans accordingly. Other scenarios may apply.
f. Note on Fuels blending: Unless expressly prohibited by State or Federal regulations, fuels blending and subsequent thermal destruction will meet recycling/recovery requirements for wastes having a minimum energy value of 2,500 BTUs/Lb., including wastes consisting of or containing Petroleum, Oil, and Lubricants (POL), organic solvents, paints, and antifreeze.
1.1.4 NOTIFICATIONS
a. The Contractor shall notify the Contracting Officer Representative (COR) at least five (5) business days before attempting site visits, providing services, or removal efforts.
| (1) In addition to the notification above for removal efforts, the Contractor shall provide the name of the driver, the driver’s Commercial Driver License (CDL) number and its expiration date, personnel badge expiration date, and truck badge expiration date (where applicable) to the COR or other Government representative at least 24 hours prior to removal. The Contractor may opt to provide a list of approved, multiple drivers designated for pickups under this specific contract to the COR, or other Government representative prior to any attempted removals. If this option is elected and the list is approved by the Government and maintained by the Contractor, the 24-hour notification requirement is waived for the remainder of the contract unless otherwise modified. | |
| (2) If a driver, other than the one specified 24 hours in advance for the specific TO, or, one whose name does not appear on the optional list of approved, multiple drivers arrive for pickup, the COR or other designated Government representative will verify the personnel change with the Contractor before the pickup commences. This may require a written notice or fax from the Contractor. | |
| b. DBIDS may be mandatory for access to some DoW facilities. See Section 1.1.8 for further information. Where DBIDS is utilized, the 24-hour advance notification is not required. At some military installations, the Contractor and/or Subcontractors may be required to be escorted to and from the place of work. This requirement is for both safety and physical security purposes. Contractors, their employees, agents, and/or any Subcontractors are required to remain at the designated work area until released or escorted by the COR or other Government representative. | |
| c. Notification requirements for an excusable delay request. If at any time following the issuance of a written TO or anytime during the performance period, the Contractor determines standard removal times for any waste streams cannot be met due to unforeseen issues at the TSDF(s) beyond the Contractor’s control, the Contractor shall notify the KO and COR in writing via email by close of business (COB) the following business day, that a delay in removals under the subject TO will ensue. Written notifications shall include the subject TO number, reason(s) for the delay, substantiable documentation from TSDF(s), and the estimated date/time of performance completion. Substantiable documentation shall include written evidence showing earnest attempts were made by the Contractor to utilize at least two qualified alternative TSDFs to meet the performance requirements in the contract. Failure by the Contractor to make a proper notification to the KO, as needed to render an informed decision regarding the Contractor’s asserted inability to perform timely due to factors beyond their control, shall constitute a waiver by the Contractor to exercise its excusable delay request. |
(1) Following proper notification, if the KO determines the Contractor has met the burden of proof to demonstrate the delay is beyond the Contractor’s control, the following conditions apply:
(a) The Government reserves the right to issue a new (standalone) TO for impacted TO line(s) or modify and re-issue a previously issued TO. Minimum TO charges will not apply to these TOs.
(b) The Contractor will provide biweekly TO updates to the KO and COR beginning 30 days after the new or modified TO is issued. Updates shall include the status of the TO, the estimated time/date for removal, and further substantiable documentation that will provide the KO information to make an informed decision whether the delay remains beyond the control of the Contractor. The requirement for TO updates will terminate when the Contractor’s requirements under the TO have been met.
(c) The Contractor will notify the KO and COR immediately upon determining that meeting standard removal times will resume.
(d) If a delay situation arises after issuance of a TO having a combination of impacted and non-impacted wastes, the KO, COR, and Contractor will mutually agree upon how best to address the situation with follow-on TO issuances and execute a contract modification memorializing said agreement.
d. For TOs containing expedited removal or other performance CLINs, the Contractor shall notify the COR or other Government representatives for each location in the following timeframes before attempting installation access:
| CLINs |
| Description |
| Required Notifications Times |
| 1095SV |
| 1-Business Day Expedited Removal/Performance |
| One (1) Hour Prior to Removal/Performance |
| 1096SV |
| 3-Business Day Expedited Removal/Performance |
| One (1) Business Day Prior to Removal/Performance |
| 1097SV |
| 5-Business Day Expedited Removal/Performance |
| Four (4) Business Days Prior to Removal/Performance |
| 1098SV |
| 10-Business Day Expedited Removal/Performance |
| Five (5) Business Days Prior to Removal/Performance |
| 1099SV |
| Expedited Commencement of ICS Work, Crew of 2 or 3 |
| Based on day of week TO is issued. (Refer to Section 3.18) |
Note: Not all expedited service CLINs may be offered under this contract. Refer to the price schedule. See Section 1.2.11 for additional information on expedited service CLINs.
1.1.5 CONVEYANCE VEHICLE OR TRAILER SECURITY
a. The Government will notify the Contractor when a conveyance vehicle, trailer, or rolloff box (ROB) must be locked and/or sealed due to Government policy or preference. The Contractor will provide the lock and, if needed, the Government will provide the seal. The Contractor will in all cases comply with state and federal laws, including DOT regulations as they pertain to conveyance vehicle and trailer security.
b. The Government has the right to request identification and/or endorsement(s) from the driver, even beyond what is identified in this contract. The Government further has the right to refuse installation access and to stop Contractor/Subcontractor work of any kind, at any time, for any reason if/when the Government believes that a security risk may exist. Any demurrage resulting from the driver verification process will not be grounds for Government reimbursement to the Contractor.
1.1.6 HOURS OF OPERATION
| a. Standard Operating Hours: Services under this contract shall be performed during normal Government working days and hours, as specified for the applicable site(s) on the Task Order (TO). Specific office hours will be provided by the assigned COR on the TO or anytime the contractor requires upon advanced request. |
| b. Carry-Over Work: Work that cannot be completed by close-of-business at the TO site(s) must be discontinued and resumed on the following business day, subject to approval by the KO. |
| c. Federal Holidays: Services shall not be scheduled or performed on regular Federal holidays (listed below) or on any day designated as a holiday by Presidential proclamation. Note: When a holiday falls on a Saturday, it is observed on the preceding Friday. When a holiday falls on a Sunday, it is observed on the following Monday. |
| Federal Holiday |
| Observation Date |
| New Year’s Day |
| 1 January |
| Martin Luther King Jr. Day |
| 3rd Monday in January |
| Presidents Day |
| 3rd Monday in February |
| Memorial Day |
| Last Monday in May |
| Juneteenth |
| 19 June |
| Independence Day |
| 4 July |
| Labor Day |
| 1st Monday in September |
| Columbus Day |
| 2nd Monday in October |
| Veterans Day |
| 11 November |
| Thanksgiving Day |
| 4th Thursday in November |
| Christmas Day |
| 25 December |
d. Installation-Specific Operating Hours: While standard operating hours generally apply, this contract supports various military and Government installations that maintain distinct work schedules. Excluding weekends and observed Federal holidays, the Contractor shall adhere to the specific operating hours of each respective facility.
Note: The chart below outlines baseline operating hours for the listed service locations. For installations not listed, or to verify specific operating schedules, the Contractor must coordinate directly with the Contracting Officer's Representative (COR).
| Location |
| Days and/or Hours of Operation |
| US Army Garrison Adelphi Lab Center |
| 0700–1530 (Closed on Fridays) |
| Walter Reed Medical Center |
| 0730–1530, Monday–Friday |
| Fort George G. Meade |
| No pickups or site visits on Fridays |
| Naval Support Facility – Indian Head, MD |
| 0700–1430, Monday–Friday (No pickups/visits after 1430) |
| DE National Guard Units |
| 0700–1630 (Units are closed every other Monday) |
| JBAB |
| 0700–1400 (All trucks must be off-site by 1400 daily) |
| Naval District, Capitol Region (All facilities) (NSF Carderock, WNY, Naval Observatory, NMIC, NSA Bethesda) |
| 0700–1400 (All trucks must be off-site by 1400 daily) |
| Surface Combat Systems Center (SCSC) Wallops Island |
| 0800–1600 |
| National Security Agency (NSA) |
| 0800–1430, Monday–Friday |
| All Maryland Army National Guard Sites |
| 0630–1700, Tuesday–Friday (No pickups/visits on Mondays) |
| Patuxent River, MD |
| 0700–1430, Monday–Thursday (No pickups on Fridays) |
| Webster Field, St. Inigoes, MD |
| 0700–1430, Monday–Thursday (No pickups on Fridays) |
| Solomon's Annex, Solomon's MD |
| 0700–1430, Monday–Thursday (No pickups on Fridays) |
| Naval Support Activity Annapolis (U.S. Naval Academy / North Severn Complex) |
| 0700–1430, Tuesday–Thursday |
| Olney Federal Support Center, MD |
| 0700–1500, Monday–Friday |
e. General Security & Access Requirements: Many installations supported under this contract enforce stringent security procedures requiring the advanced submission of personnel information prior to granting site access. The Contractor is solely responsible for ensuring complete and timely compliance with these requirements. Access delays resulting from non-compliance shall not relieve the Contractor of its performance obligations.
The Contractor shall comply with the following baseline security protocols:
| Requirement Category |
| Protocol Details |
| Advance Notification |
| Minimum site visit notification is five (5) business days; however, some sites require up to 15 business days (or more). Irregularities or omissions in submitted information will delay processing times. |
| Required Documentation |
| Standard entry conditions may require proof of U.S. Citizenship, a letter from the Contractor stating the purpose of business, and valid driver’s licenses. |
| COR Coordination |
| To address unique security requirements at various service locations, the assigned COR(s) will coordinate with the Contractor to assist in installation access as required. The Contractor is advised to contact the COR to confirm specific security requirements and hours prior to attempting any visits. |
| Access Delays |
| The Contractor is advised that unexpected entry delays may occur at any time at any pickup point on this contract. |
| h. Installation-Specific Security Protocols: The following locations require specific, distinct security procedures and advance coordination. |
| Location |
| POC / Phone |
| Advance Notice |
| Specific Security Requirements |
| Adelphi Laboratory |
| (301) 394-6300 |
| Contact Assigned COR |
| All visitors must be U.S. Citizens with positive identification. |
| SCSC Wallops Island, VA |
| (757) 824-7185 |
| 5 Days |
| Employees must be U.S. Citizens. Provide: Name of pick-up company, Employee's full name, Social Security Number, Place/Date of birth. |
| Andrews AFB, MD |
| (301) 981-1773 |
| 72 Hours |
| Provide driver info prior to pick up at Generators location: Driver’s License Number & State, Date of Birth, Full Name. |
| US Coast Guard Yard |
| (410) 636-7026 |
| 24 Hours |
| Visitors must be U.S. Citizens with positive ID. Vehicles subject to search. Provide names 24 hours prior. |
| Washington Aqueduct |
| (202) 934-0775 |
Dalecarlia WTP Guard Station (202) 746-2760 McMillan WTP Guard Station (202) 762-0151
| 24 Hours |
| Visitors must be U.S. Citizens with positive ID. Vehicles subject to search. Provide names 24 hours prior to picking up at Generators location. |
| Washington Navy Yard / USMC Barracks (8th & I) |
| See Assigned COR |
| See Assigned COR |
| Tractor trailers are STRICTLY PROHIBITED. |
| Walter Reed Army Medical Center |
| See Assigned COR |
| See Assigned COR |
| Provide names/companies in advance. Use only the Georgia Ave/Butternut St. gate (closed at 0730 but manned; guards will open upon arrival). |
| NSA Bethesda |
| See Assigned COR |
| See Assigned COR |
| All trucks must enter through the USUHS gate (Gate 5) off Jones Bridge Road. |
| NSF Suitland (NMIC) |
| (202) 433-0415 |
| Up to 4 Weeks |
| Requires completion of Navy Local Population ID Card/Base Access Pass Registration Form. Requires quarterly resubmission. No cell phones or electronics allowed inside. |
i. AEDC White Oak, MD Protocols: Primary Security Point of Contact (POC): (301) 394-6401. Personnel Citizenship Requirements: All Contractor personnel performing on-site services must be either United States (U.S.) citizens or Lawful Permanent Residents (LPR).
Pre-Visit Submission Requirements:
The Contractor shall submit the following documentation prior to any scheduled site visit:
| Status |
| Advance Notice |
| Required Documentation |
| U.S. Citizens |
| 5 Business Days |
| 1. Company letter declaring individual as an employee. 2. Color copy of government-issued picture ID.3. Second form of picture ID. |
| Lawful Permanent Residents (LPR) |
| 30 Business Days |
| 1. Company letter declaring individual as an employee. 2. Color copy of government-issued picture ID.3. Copy of employee’s I-551 (front and back). |
j. NSA, Fort Meade Protocols: All Contractor personnel entering NSA Fort Meade shall be United States (U.S.) citizens with no criminal record, and all transport vehicles must be completely empty of waste upon arrival. The Contractor shall strictly comply with the following mandatory access protocols. If installation security requirements change during the period of performance, the designated Contracting Officer’s Representative (COR) will promptly notify both the Contracting Officer (KO) and the Contractor to facilitate necessary planning and schedule adjustments.
| Step / Requirement |
| Instructions |
| 1. Advance Notification |
| Provide to Security Office at (301) 688-5153: Name, Social Security Number, Date/Place of Birth, and Company Name. |
| 2. Routing & Arrival |
| You must use Route 198 and Route 32 NSA Inspection Gate. Proceed to the inspection area entrance at the bottom of the Route 198 ramp getting onto Route 32 westbound. |
| 3. Pre-Inspection Call |
| PRIOR to entering the inspection area, the driver must call (301) 688-5153 or (301) 688-7728 for an escort to SAB 4. (Escort required for initial pickups). Provide driver's license upon entering. |
| 4. Vehicle Inspection |
| Turn off vehicle, open all doors, and step away from the vehicle. A police officer and K-9 will inspect. Inform the officer you are going to NSA SAB 4 Door 19. |
| 5. Vehicle Plaque |
| Driver will be issued a vehicle plaque. Proceed to the front of the building (just right of the inspection area) to obtain a visitor’s badge. |
| 6. Visitor’s Badge |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .