WSN320-0004.pdf

Individual Waste Stream Report Waste Stream 320-0004 Aproved By JH Date: 3/29/2002

1. Specific Name of Waste: Ash,Dust,Slag,Plasma Arc Cutter and Cutting Operations

2. Description of Process Generating Waste Metal forming/cutting processes

3. Process Document Number NA

1. Physical Description Solid, grey to black dust

1. PPE: 009

2. Method Of Waste Management By Shipyard (Code): 07

3. Required Labels: ID HW D43

4. Container Requirements: Steel open top drum w/bung top lid 5. Compatibility Information: Keep away from water

6. Billing Codes a. BULK: A2 b. F

7. Additional Handling Info: WARNING! If this waste contains aluminum fines use extreme caution while handling! A ring top lid with bung should be used in order to allow drum to vent! Note: A pressure relief fitting which will fit bung opening is available and should be used whenever possible!!!

Various types of metal are cut using this machine (mild steel, CRES, Aluminum, etc.).

1. RCRA Waste? HZ 2. TSCA Waste? N 3. State Waste? DW 4. Land Disposal Restricted? Y

5. Use Separate LDR ? N 6. Problem Waste? N 7. Radioactive ? N 8 Exluded ? N NA

11. Primary Waste Code: 12. Sample Batch: N 13: pH: 14. Flashpoint:

A. General Information:

B. Physical / Chemical Characteristics:

2. Materials Found In The Waste:

3. Constituents:

(a). Test Method For TCLP Consituents:

(b). Metals:

(c). Other Constituents:

C. Waste Handling Information:

D. Designation:

E. DOT Description:

Waste Stream Originators

Stock Number Trade Name Manufacturer MSDS

CAS # Name Min Max Unit

CAS # Name Min Max Unit

9. EPA Waste Codes

10. State Waste Codes

11 17 PR

NICKEL7440-02-0 0 5.6 PPM

ZINC7440-66-6 0 99 PCT

Aluminum7429-90-5 0 100 PCT

BRASS12597-71-6 0 33 PCT

GRITS & DUSTSPS00-01-1 90 99 PCT

METALLIC WASTE, NON RCRAPS00-01-4 1 20 PCT

STAINLESS STEEL12681-83-3 0 33 PCT

TITANIUM7440-32-6 0 1 PCT

D001 D003

Monday, September 17, 2012 Page 1 of 2

Waste Stream 320-0004 Aproved By JH Date: 3/29/2002

1. Proper Shipping Name: WASTE WATER-REACTIVE SOLID, FLAMMABLE, N.O.S.

Hazard Class 4.3, 4.1, DOT ID Number UN3132 Packing Group II

Additional Description: (Aluminum)

2. Reportable Quanty (RQ) of the waste mixture: 100

1. NEESA Process Code: FP 2. Source Code G05 3. Form Code: W304 4. Origin Code: I

5. If Residual Gen Sys Code 6. Site Managed? OFF 7. If On-Site Mgt Sys Code

8. Treatment Code Type: a. Treatment By Generator? N b. Permit By Rule? N

(a.) Did New Activities In Report Year Result In Minimization Of This Waste Stream? N

(b). Waste Minimization Codes:

(c). Did Waste Min Activities Increase Toxicity or Air, Water, Land Emmissions? N

(d). On-Site Recycling Percent: 0 (e). Source Reduction Percent: 0

11. Report Comments:

E. DOT Description:

F. Additional Report Information:

9. Waste Minimization Activities:

Monday, September 17, 2012 Page 2 of 2