DDDC Up Cut Saw specs.docx
DOCX document 16 KB Posted
- Attached to
- Up Cut Saws Federal contract opportunity
- Solicitation number
- SP330025Q0136
- Issued by
- Defense Logistics Agency Distribution
About this file
The document is a detailed specification sheet for an Up Cut Saw procurement by the Defense Logistics Agency Distribution at the San Diego Naval Base. The saw is a sophisticated piece of woodworking equipment featuring a 230-volt, 3-phase electrical system with a 24-inch diameter carbide-tipped blade, 10hp TEFC arbor drive motor, and 24VDC PLC-controlled operation. Key technical specifications include manual angle set capability (up to 75 degrees), automatic material clamping, a 120-inch in-feed galvanized roller conveyor, and a 192-inch out-feed table with a programmable 16ft Tiger Stop positioning system.
The solicitation (SP330025Q0136) is a 100% Small Business Set-Aside under NAICS code 332216 with a 750-employee size standard, targeting manufacturers in the Saw Blade and Handtool Manufacturing category. The procurement includes the Up Cut Saw, freight charges, equipment installation, and an 8-hour training block for up to 4 personnel. Quotes must be submitted electronically to Deborah.L.Johnson@dla.mil by 5:00 PM EST on April 25, 2025, with vendors required to be registered in the System for Award Management (SAM). The government intends to award a single Firm Fixed Price (FFP) Purchase Order, evaluating offers based on technical capability, past performance, and pricing to select the lowest-priced technically acceptable offer.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SP3300-25-Q-0136 Amendment 0001.pdf | ||
| Performance Work Statement.pdf | ||
| SP330025Q0136.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
· 230 volt, 3 phase, 60 cycle electrical operation
· 24” diameter carbide tipped blade
· 10hp TEFC arbor drive motor
· 24VDC control for pushbutton operation via PLC
· Manual angle set
· Capable of cuts up to 75 degrees from left or right side of 0 degrees
· Banded 3 V-Belt Drive
· Saw access door with safety switch
· Automatic clamping of material before cutting
· Right side feed
· In-feed table 120” long X 12” wide galvanized roller conveyor with 3” steel high fence rail with rollers on 6” center. Includes 1 Heavy Duty support leg and machine mounting brackets.
· Out-feed table 192” (192” usable working space) long X 20” (16” usable working space) wide with programmable 16ft Tiger Stop made from solid 7 gauge steel with 3” fence rail including support leg and machine mounting brackets (18ft overall length)
· Programmable 16ft working length material positioning system (TIGER STOP)
· Gang Stop to extend material positioning system range 9” – 24”
· Safety Interlock Kit for material positioning system (Tiger Stop)
· Air Supply prep package with filter, regulator and shut off valve
Must include all Freight charges.
Installation of equipment and 8 hour block of training for up to 4 personnel required.
Shipping Information:
Defense Logistics Agency Defense Distribution Depot San Diego Naval Base 32nd Street
BLDG 3581
San Diego, CA 92136
File details come from the government source that posted it. Updated .