Performance Work Statement.pdf
PDF 68 KB Posted
- Attached to
- Up Cut Saws Federal contract opportunity
- Solicitation number
- SP330025Q0136
- Issued by
- Defense Logistics Agency Distribution
About this file
This Performance Work Statement (PWS) details specifications for an Up Cut Saw to be procured by the Defense Logistics Agency for the Defense Distribution Depot in San Diego, California. The equipment requires a 230-volt, 3-phase electrical system with a 24-inch diameter carbide-tipped blade, 10hp TEFC arbor drive motor, and 24VDC PLC-controlled pushbutton operation. The saw features a manual angle set capability, automatic material clamping, and can make cuts up to 75 degrees from either side of 0 degrees.
The PWS specifies a comprehensive saw system including an in-feed table (120" long x 12" wide) with galvanized roller conveyor, an out-feed table (192" long x 20" wide) with a programmable 16ft Tiger Stop positioning system, and additional features such as a safety interlock kit and air supply prep package. The procurement includes equipment freight charges, installation, and an 8-hour training block for up to 4 personnel at the Naval Base 32nd Street location in San Diego. This solicitation is a 100% Small Business Set-Aside under NAICS code 332216, with the government intending to award a single Firm Fixed Price Purchase Order.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| DDDC Up Cut Saw specs.docx | DOCX document | |
| SP3300-25-Q-0136 Amendment 0001.pdf | ||
| SP330025Q0136.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Performance Work Statement
• 230 volt, 3 phase, 60 cycle electrical operation
• 24” diameter carbide tipped blade
• 10hp TEFC arbor drive motor
• 24VDC control for pushbutton operation via PLC
• Manual angle set
• Capable of cuts up to 75 degrees from left or right side of 0 degrees
• Banded 3 V-Belt Drive
• Saw access door with safety switch
• Automatic clamping of material before cutting
• Right side feed
• In-feed table 120” long X 12” wide galvanized roller conveyor with 3” steel high fence rail with rollers on 6” center. Includes 1 Heavy Duty support leg and machine mounting brackets.
• Out-feed table 192” (192” usable working space) long X 20” (16” usable working space) wide with programmable 16ft Tiger Stop made from solid 7 gauge steel with 3” fence rail including support leg and machine mounting brackets (18ft overall length)
• Programmable 12ft working length material positioning system (TIGER STOP)
• Gang Stop to extend material positioning system range 9” – 24”
• Safety Interlock Kit for material positioning system (Tiger Stop)
• Air Supply prep package with filter, regulator and shut off valve
Must include all Freight charges.
Installation of equipment and 8 hour block of training for up to 4 personnel required.
Shipping Information:
Defense Logistics Agency Defense Distribution Depot San Diego Naval Base 32nd Street
BLDG 3581
San Diego, CA 92136
File details come from the government source that posted it. Updated .