Attachment_5-_Special_Packaging_Instructions_(SPI).pdf
PDF 22 MB Posted
- Attached to
- Wooden Pallets and Lid-Sheet Metal Container
- Solicitation number
- SP330019Q0096
- Issued by
-
Defense Logistics Agency Distribution
About this file
Attachment 5- Special Packaging Instructions (SPI)
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRESERVATION: IAW MIL-STD 2073
SERVICEABLE METHOD: 10
UNSERVICEABLE METHOD: 10
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-224-3098
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
C) NOT FOR OUTSIDE STORAGE
CLOSURE:
LEVEL A: IAW ASTM D 6251
LEVEL B: IAW ASTM D 6251
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6251 A III 2
B ASTM D 6251 A III 2
LEVEL A LEVEL B
GROSS CU FT 135.07 135.07
GROSS WT LBS 380 380
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 190 24 41
LEVEL B 190 24 41
CNTNR O.D.
LEVEL A 192 1/4 26 1/4 46 1/4
LEVEL B 192 1/4 26 1/4 46 1/4
ITEM DIM: N/A
ITEM WT LBS: N/A
4J20112-103A
1560-00-224-3098 LH
LEADING, EDGE ASSY.
5 3 PAD 2 X 8 X 24 A-A-59136
4 2 PAD 2 X 18 X 24 A-A-59136
3 2 TIE DOWN 2 X 6 (NOM) X 24 ASTM D 6199
2 4 TIE DOWN 1/2 X 6 X 19 A-A-55057
1 1 EXTERIOR CONTAINER SEE PACKING
A
A IAW W/O 234/19 19045
NOTES:
1. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
SEE
NOTE
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 15 Feb 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-224-3098
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 2
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-224-3098
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
M. RAINES
AutoCAD SHX Text
C. CORBIN
AutoCAD SHX Text 72042
LEADING, EDGE ASSY.
COMPUTER GENERATED
AutoCAD SHX Text F00-224-3098
AutoCAD SHX Text F00-224-3098
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 2 OF 2
E~dVATION AND PACKAGING
LEVEL A IN AIW SPEC WIL-P-116 METHOD I
LEVEL B
LEVEL C SAW .u 1..£'/EL "A"
CLEANING AND DRYING
!! AIW IPEC lflb-P-116
PRESERVATION COMPOUND
APPLY MIL-O·Z~7".l•ON IIEAII'IIf09
CUSHIONING AHQ DUNNAGE
AS INDICATED IN UST OF IIIIATERIAUI
AND ON NOTES- APPLIC.ULE tO
ALL Lf:Vt:L5.
PACKING
LEVEL A-tlll.•C•2!11:51
L£V£L II-
GROSS CUBE
.!!£_ 1!10 1!10
GROSS WEIGHT
~ ~ !174
SHIPPING CNTR. 0. D
Z04-114 )( Z!l )( !10•3/4
ITEM NET WT J..a.....!:.!!, ITEM NET DIM 191 x tl K 3!1·3~
MARKING B CLOSURE
":'JTL;':~;.::r"'~mtor · lM!!I1. «*T.foiNER WITH APPUCAIILE
TPO NO. 00-224·3100
1!1 APDtl!Otl TO OTHER SPEC!f!EQ IIAitii.INGS CONTAINEft SHALL liE iiiiiriKED IN ACCC>JtOANCE wrTHiiil.-STO·IU.
C:I..D$VftfSNAbllfAI~IP'IEO
IN AI"PLICAIILE COIIITAINEII' SPICifiCATIOfll
FED STOCK NO. PART NO. ~~GHT HAND SLAT ASSY. IS SHOWN BELow.
FOR INSTALI.ATION (T LEFT HAND SLAT
ASSY. REVERSE SI.IPPORTS 8 SADDLES.
r''"--1. ~,.
=· -~r~ oc•--~.
r'""'-i
$££DETAIL NO. 6
5££ 0£TAIL NO .J -
SEE DETAIL NO $
ASSEMBLY DETAIL
" ii {I ii ll !9.
t ,.
TPO NO. 00-224-3100
COII .. ..-e'l'l!.t:r CoOt. CJU Of<TA.I'- A.IQ. ~ C::<>oJT~"l) I :ll n....._,82 ..,..._, f- •. ,. --1 -i r"' '"" ""' ""' ro -------Q1 ~ ~ Ul~ DETAIL ~2
~· ..... -1
"'CoNTAIN[fl 203•t/2lC23·1i2--~I.D.
CAG BOLT (WITH ~UT WASHE~, a LOCK W~M[A) ST~,EL
22 )( 12: lC3/4 -- 2:2: II 4 II 2: l NOM)
II )( 2 X I (NOIII)
l2 II 12: X 311 2:Z X 12 X 3/4
2:2 II 4 X 2 !1110111
II )( 2 X I !NOM
2:S II II X I
LOWER Sl.IPPOI'IT Ill X 13 lC ~/4 OWER SUPPORT Ill K 12 X 314
U_~EII SUPPOfiT II X I X 314
UPJ;i~ SUPPOII
!!ill.
f"LO~IIfCI
SKID
iiUiiiNG STittP
MATERIALS
.. :u
TYP1:I,CL 2 '' ''
U.S. AIR FORCE
SE~ ,,. ... ,...
NN·P·SSO
,...·C·!712
""'•C•I ,.,..,.."
/J}/I..LJEJ... .:51Juc.EDO
SA/ALC KELLY AFB, TEXAS
ASSY.__NQ. 6 ·
D c
A
RU
r
~6!U l"'5<:l ~
1---" _j__
E:E::::::===r:::=J---T
T~·~~
II 0
I lL
1·1/I!IR
1----- 10·718
.. '111:1. ... ~
I l 514 R
DETAIL M?, 3
DETAIL NO. 5
-j•"'l--
+11 I
H~.f-H-1-t-I~Jl
I .;, ~ .:. ~ ~ ;;
5 1 r------- " ----I_L I I :::J ,_,, ·i --, r·~~~1 0 I I
DETAIL NO. 4
"' .,. ' ~.l
APPLICATION
1-------- " ----------1
QTY REQO
K. ----- LIIIlUS"""""""""""c~D O....:IOSIO ... MliMI~OOU ro..uo.:ca.:.....,o• u! ... ~
'~REF
2 TPO NO. I 00-224-3100
REVISIONS
DETAIL NO. 6
$££ IKiAIL NO. S FOR CONiOUff DIM
LIST Qlf MATERIALS
US AIR FORCE
SA/ALC KELLY AFB, TEXAS
'iiiii'f 2 Of' Z
D c i I I I I I I I I I I I u
UNSERVICEABLE METHOD: 10
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-249-8312
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
CLOSURE:
LEVEL A: IAW ASTM D 6251
LEVEL B: IAW ASTM D 6251
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6251 A III 2
B ASTM D 6251 A III 2
LEVEL A LEVEL B
GROSS CU FT 89.79 89.79
GROSS WT LBS 192 192
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 82 33 47
LEVEL B 82 33 47
CNTNR O.D.
LEVEL A 84 1/4 35 1/4 52 1/4
LEVEL B 84 1/4 35 1/4 52 1/4
ITEM DIM:
ITEM WT LBS: 120
MULTIPLE
INLET DUCT ASSY.
11 A/R WEBBING NYLON 2 INCH ASTM D 3950
10 A/R STRAPPING 3/4 WIDE ASTM D 3953
9 2 PAD 1/2 THICK PPP-C-1797, <6>, DET. 1 & 6
8 A/R ADHESIVE FOR LAMINATION A-A-59692, <3>
7 4 CARR BOLT W/NUT & WASHER 3/8 X 3 COMMERCIAL, <1>, DET. 1
6 A/R PAD 1/4 THICK PPP-C-1797, <3>, DET. 1
5 3 PLYWOOD PANEL 33 X 24 X 3/8 A-A-55057, <2>, <3>, <5>, DET. 1
4 2 SUPPORT 2 X 4 (NOM) X 93 1/2 ASTM D 6199, <1>, <2> DET. 1 & 3
3 2 SUPPORT 2 X 4 (NOM) X 34 3/4 ASTM D 6199, <2> DET. 1 & 2
2 12 RUBBING STRIP 2 X 4 (NOM) X 12 ASTM D 6199, DET. 1
1 1 EXTERIOR CONTAINER SEE PACKING
G
G IAW W/O 040/19 19065
SEE
NOTE
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 06 Mar 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
MULTIPLE
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 4
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
M. RAINES
AutoCAD SHX Text
J. HOLMES
73247
NOTES:
1. SECURE P/N 4 IN PLACE WITH P/N 7.
2. SECURE 2 EA. P/N 5 TO P/N 4 AND 1 EACH P/N 5 TO P/N 3 BY NAILING.
3. LAMINATE P/N 6 TO P/N 5 WITH P/N 8.
4. REPAIRABLES SHALL BE PACKAGED AS SHOWN HEREON. LEVEL "B" SHALL APPLY.
5. MARK P/N 5 WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.
6. USE P/N 9 TO LINE BOTTOM AND SIDES OF CONTAINER. CUT SIDE PADS AS DEPICTED BY DETAIL 6.
7. CONTAINER CLOSURE, SEALING AND REINFORCEMENT SHALL BE IAW APPLICABLE SPECIFICATION.
8. PLYWOOD USED IN CONSTRUCTION OF CONTAINER SHALL CONFORM TO PS1-09 STANDARD INTERIOR WITH EXTERIOR GLUE, GRADE C/D.
9. SPECIFICATION ORDERING DATA NOT SPECIFIED (STYLE, TYPE, CLASS, GRADE, ETC.) SHALL BE THE PACKERS OPTION..
10. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
11. USE 2 X 4 FOR BATTONS ON BOTTOM OF CONTAINER.
INLET DUCT ASSY.
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 2 OF 4
INLET DUCT ASSY.
COMPUTER GENERATED
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SHEET 3 OF 4
AutoCAD SHX Text
AutoCAD SHX Text o
AutoCAD SHX Text
AutoCAD SHX Text o
AutoCAD SHX Text 93 1/2
AutoCAD SHX Text 7 1/2
AutoCAD SHX Text 3 1/2
AutoCAD SHX Text 2"
AutoCAD SHX Text 34 3/4
AutoCAD SHX Text
DETAIL 3, P/N - 4
AutoCAD SHX Text
DETAIL 2, P/N -3
AutoCAD SHX Text
DETAIL 1
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
1 1/16 TYP.
AutoCAD SHX Text
2 TYP.
INLET DUCT ASSY.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
TYP.
AutoCAD SHX Text 42 1/16
AutoCAD SHX Text 84 1/4
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DETAIL 6
AutoCAD SHX Text P/N-9
AutoCAD SHX Text
DETAIL 4
AutoCAD SHX Text
DETAIL 5
AutoCAD SHX Text
TOP & BOTTOM PANEL
AutoCAD SHX Text
SIDE PANEL
AutoCAD SHX Text
END PANEL
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text F00-249-8312
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 4 OF 4
SERVICEABLE METHOD: 20
UNSERVICEABLE METHOD: 20
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: MIL-PRF-23827 AS REQUIRED
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-136-3084
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
CLOSURE:
LEVEL A: IAW ASTM D 6251
LEVEL B: IAW ASTM D 6251
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6251 A III 2
B ASTM D 6251 A III 2
LEVEL A LEVEL B
GROSS CU FT 70.80 70.80
GROSS WT LBS 359 359
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 105 57 14
LEVEL B 105 57 14
CNTNR O.D.
LEVEL A 107 1/4 59 1/4 19 1/4
LEVEL B 107 1/4 59 1/4 19 1/4
ITEM DIM: 102 53 7 7/8
ITEM WT LBS: 105
MULTIPLE
MULTIPLE
SPOILER, WING, AIRCRAFT
17 A/R PRESERVATIVE MIL-PRF-23827, <5>
16 A/R ADHESIVE LAMINATION A-A-59692, <7>
15 A/R STRAPPING STEEL ASTM-D-3953
14 2 CUSHIONING 1 X 10 X 56 7/8 A-A-59136, TY. 1, CL. 4, <7>
13 1 CONTAINER 105 X 57 X 14 I.D. SEE PACKING
12 1 BARRIER MATERIAL 128 X 192 MIL-PRF-121, TY. 1, GR. A, CL. 1
11 2 BOLT, WASHER & NUT 1/4 X 20 X 4 COMMERCIAL
10 3 CUSHIONING 1 X 8 X 18 A-A-59136, TY. 1, CL. 4, <7>
9 1 CUSHIONING 1 X 8 X 101 A-A-59136, TY. 1, CL. 4, <7>
8 4 BLOCK 1 X 3 X 12 ASTM D 6199, <6>
7 2 HOLD DOWN 1 X 6 (NOM) X 56 7/8 ASTM D 6199, <4>, <7>
6 2 SPACER 1 X 3 X 8 ASTM D 6199, <6>
5 1 FILLER 1/4 X 1/2 X 104 7/8 A-A-55057, TY. A, <6>
4 2 BLOCK 2 X 4 (NOM) X 8 1/2 ASTM D 6199, <6>
3 2 LONGITUDINAL MBR. 2 X 4 (NOM) X 104 7/8 ASTM D 6199, <6>, <7>
2 4 SKID 2 X 4 (NOM) X 107 ASTM D 6199
1 40 RUBBING STRIP 2 X 4 (NOM) X 12 ASTM D 6199
C
C IAW W/O 060/19 19224
SEE
NOTE
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 12 Aug 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 4
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
M. RAINES
AutoCAD SHX Text
C. CORBIN
76033
1. CONTAINER CLOSURE, SEALING AND REINFORCEMENT SHALL BE IAW ASTM-D-6251.
2. SPECIFICATION ORDERING DATA NOT SPECIFIED (TYPE, CLASS, STYLE, GRADE ETC.) SHALL BE THE PACKERS OPTION.
3. PLYWOOD USED IN CONSTRUCTION SHALL CONFORM TO PS 1-09 STANDARD INTERIOR WITH EXTERIOR GLUE, GRADE C/D.
4. MARK P/N 7 WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.
5. USE PRESERVATIVE P/N 17 ON BARE CRITICAL SURFACES.
6. SECURE P/N's 3, 4, 5 & 6 IN PLACE BY NAILING. USE WOOD SCREWS TO SECURE P/N 8 IN PLACE.
7. USE ADHESIVE P/N 16 TO LAMINATE P/N 14 TO P/N 7 AND P/N's 9 & 10 TO P/N 3.
8. PLUGS IAW NAS847 ARE TO BE INSTALLED IN SPOILER HINGE FITTING HOLES INSTEAD OF MIL-PRF-121 BARRIER MATERIAL.
9. CONTAINERS CONSTRUCTED USING PREVIOUS REVISIONS OF THIS SPI ARE NOT ACCEPTABLE.
10. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
SPOILER, WING, AIRCRAFT
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SPOILER, WING, AIRCRAFT
A S
S E
M B
L Y
D
E T
A I L
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 3 OF 4
SPOILER, WING, AIRCRAFT
COMPUTER GENERATED
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text F00-136-3084
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
UNSERVICEABLE METHOD: 10
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-140-2610
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
C) CENTER OF BALANCE
CLOSURE:
LEVEL A: IAW ASTM D 6251
LEVEL B: IAW ASTM D 6251
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6251 A III I
B ASTM D 6251 A III I
LEVEL A LEVEL B
GROSS CU FT 60.394 60.394
GROSS WT LBS 280.5 280.5
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 118 39 16
LEVEL B 118 39 16
CNTNR O.D.
LEVEL A 120 1/4 41 1/4 22
LEVEL B 120 1/4 41 1/4 22
ITEM DIM: 114 7/8 37 11 1/4
ITEM WT LBS: 70
4P50006-165D 1560-01-313-1802 UC
PLATE, STRUCTURAL, AI
14 1 CONTAINER 118 X 39 X 16 I.D. SEE PACKING
13 2 STRAPPING 3/8 X 0.020 X 292 1/2 ASTM D 3953
12 6 STRAPPING 3/8 X 0.020 X 134 1/2 ASTM D 3953
11 1 HOLD DOWN 38 7/8 X 6 7/8 X 1 1/2 A-A-55057, TY. A, <4>, DETAIL 2
10 1 HOLD DOWN 38 7/8 X 5 1/4 X 1 1/2 A-A-55057, TY. A, <4>
9 1 SADDLE 38 7/8 X 7 3/8 X 1 1/2 A-A-55057, TY. A, <4>, DETAIL 1
8 2 BLOCK 37 7/8 X 1 1/2 X 1 3/8 ASTM D 6199
7 1 WRAP 127 5/8 X 98 1/2 X 1/4 PPP-C-1797 OR EQUAL
6 1 BOTTOM CUSHIONING 39 X 36 X 1/4 PPP-C-1797 OR EQUAL
5 8 POCKET CLEATS 1 X 2 (NOM) X 15 1/4 ASTM D 6199
4 4 CLEATS 1 X 4 (NOM) X18 3/4 ASTM D 6199
3 4 SLEEPERS 1 X 4 (NOM) X 37 1/2 ASTM D 6199
2 4 SKIDS 2 X 4 (NOM) X 39 ASTM D 6199
1 4 RUBBING STRIPS 2 X 4 (NOM) X 39 ASTM D 6199
B
A IAW W/O 070/01 02134
SEE
NOTE
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 23 Jan 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
B IAW W/O 009/19 19023
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 5
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
C. CORBIN
AutoCAD SHX Text
J. HOLMES
91262
1. CONTAINER CLOSURE, SEALING AND REINFORCEMENT SHALL BE IAW APPLICABLE SPECIFICATION.
2. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
3. REPAIRABLES SHALL BE PACKAGED AS SHOWN HEREON.
4. MARK P/N's 9, 10 & 11 WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.
5. PLYWOOD USED IN CONSTRUCTION OF CONTAINER SHALL CONFORM TO PS 1-95, STANDARD INTERIOR WITH EXTERIOR GLUE, GRADE C/D.
6. SPECIFICATION ORDERING DATA NOT OTHERWISE SPECIFIED (STYLE, TYPE, CLASS, GRADE, ETC.) SHALL BE THE PACKERS OPTION.
PLATE, STRUCTURAL, AI
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 2 OF 5
7 3/8
1 11/16
TYP
4 1/4
TYP
1 7/8
1 1/2
3/4
38 7/8
5 3/8
1 3/4
3 3/16
TYP
TYP
1 1/2
3/4
1 1/2
6 7/8
38 7/8
PLATE, STRUCTURAL, AI
AutoCAD SHX Text
DETAIL NO. 1
AutoCAD SHX Text
DETAIL NO. 2
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 3 OF 5
31 15/16
PLATE, STRUCTURAL, AI
AutoCAD SHX Text 8 11/16
AutoCAD SHX Text 1 5/8
AutoCAD SHX Text
TYP
AutoCAD SHX Text
FLOOR VIEW
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1 1/2
AutoCAD SHX Text
AutoCAD SHX Text I.D.
AutoCAD SHX Text I.D.
AutoCAD SHX Text
AutoCAD SHX Text 38 1/2
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 4 OF 5
1 3/8
PLACE P/N 3 BETWEEN
BOTTOM PANEL AND SKID.
PANEL EXTERIOR AFTER POSITIONING
NAIL P/N 4 (CLEAT) TO BOTTOM CNTR.
2 EA. LONGITUDINALLY AT CENTER OF
BALANCE FORK LIFT ENTRY AND EQUALLY
SPACED FROM CONTR. SIDES.
ASSEMBLY DETAIL
PLATE, STRUCTURAL, AI
AutoCAD SHX Text
CENTER OF
AutoCAD SHX Text
BALANCE
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text F00-140-2610
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 5 OF 5
UNSERVICEABLE METHOD: 20
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: SEE NOTE 2
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-175-8109
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
CLOSURE:
LEVEL A: IAW ASTM D 6256
LEVEL B: IAW ASTM D 6256
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6256 A I 2
B ASTM D 6256 A I 2
LEVEL A LEVEL B
GROSS CU FT 807.14 807.14
GROSS WT LBS 1430 1430
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 174 84 86 1/2
LEVEL B 174 84 86 1/2
CNTNR O.D.
LEVEL A 176 1/4 86 1/4 91 3/4
LEVEL B 176 1/4 86 1/4 91 3/4
ITEM DIM: 169 79 80 1/2
ITEM WT LBS: 450
MULTIPLE
MLG DOOR ASSY, C-5 ACFT
18 1 CONTAINER 174 X 84 X 86 1/2 I.D. SEE PACKING
17 4 CUSHIONING 3 1/2 X 3 1/2 X 1/2 A-A-59136, TY. 1, CL. 2
16 4 WRAP 12 X 12 MIL-PRF-121, TY. 1, GR. A, CL. 1
15 4 CROSS MEMBERS 2 X 6 (NOM) X 84 ASTM D 6199
14 1 BLOCK 4 X 4 (NOM) X 33 1/2 ASTM D 6199
13 2 SPACER 2 X 4 (NOM) X 110 ASTM D 6199, DET. 2
12 2 SPACER 2 X 4 (NOM) X 11 ASTM D 6199, DET. 2
11 2 BLOCK 4 X 4 (NOM) X 6 3/4 ASTM D 6199, DET. 2
10 4 YOKE 14 X 11 1/2 X 3/4 A-A-55057, DET. 2
9 4 YOKE CLAMP 12 X 5 1/2 X 3/4 A-A-55057, DET. 1
8 4 HEX BOLT, LOCK WASHER & NUT 3/8 X 5 COMMERCIAL
7 4 ANGLE CLAMP 4 X 3 1/2 X 1 1/2 ALUMINUM, 3/8" THICK
6 4 DIAGONAL BRACE 2 X 4 (NOM) X 81 ASTM D 6199
5 1 HORIZONTAL BRACE 2 X 4 (NOM) X 83 1/2 ASTM D 6199
4 2 VERTICAL SUPPORT 2 X 4 (NOM) X 78 1/2 ASTM D 6199
3 2 DIAGONAL BRACE 2 X 4 (NOM) X 73 1/2 ASTM D 6199
2 4 GUSSET 14 X 14 X 1/2 A-A-55057
1 2 YOKE BASE 2 X 4 (NOM) X 84 ASTM D 6199
A
A IAW W/O 033/19 19046
SEE
NOTE
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 15 Feb 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
4F02055-104A
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-175-8109
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 3
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
J. HOLMES
AutoCAD SHX Text
C. CORBIN
AutoCAD SHX Text 85168
F00-175-8109
1. LINE ALL PART SURFACES WHICH CONTACTS WOOD OR METAL WITH P/N 17.
2. P-2 ON BUSHINGS, ROLLERS AND BARE STEEL. P-11 ON BEARINGS.
3. WRAP PRESERVED AREAS WITH P/N 16.
4. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
MLG DOOR ASSY, C-5 ACFT
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-175-8109
AutoCAD SHX Text F00-175-8109
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 2 OF 3
MLG DOOR ASSY, C-5 ACFT
COMPUTER GENERATED
AutoCAD SHX Text F00-175-8109
AutoCAD SHX Text F00-175-8109
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 3 OF 3
UNSERVICEABLE METHOD: 20
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-194-0323
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
C) ON CONTAINER TOP IN 1/2 INCH LETTERS:
"CELL TEMPERATURE MUST BE ABOVE 65° F
BEFORE REMOVING OR FLEXING CELLS"
CLOSURE:
LEVEL A: IAW ASTM D 6251
LEVEL B: IAW ASTM D 6251
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6251 A III 2
B ASTM D 6251 A III 2
LEVEL A LEVEL B
GROSS CU FT 21.35 21.35
GROSS WT LBS 97 97
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 44 44 12
LEVEL B 44 44 12
CNTNR O.D.
LEVEL A 46 1/4 46 1/4 17 1/4
LEVEL B 46 1/4 46 1/4 17 1/4
ITEM DIM: 43 1/2 43 1/2 11 1/2
ITEM WT LBS: 37
MULTIPLE
TANK, FUEL, AIRCRAFT
11 A/R CUSHIONING PPP-C-1797, <5>
10 A/R PRESERVATIVE MIL-PRF-6081E
9 A/R PAPERBOARD CORRUGATED A-A-1051C, <2>
8 A/R TAPE ASTM D 5330
7 A/R WRAP MIL-PRF-121, TY. I, GR. A
6 A/R STRAPPING 5/8 WIDTH ASTM D 3953, <4>, <6>
5 2 TOP & BOTTOM PADS 44 X 44 ASTM D 4727, CF, DOM, S/W
4 2 SIDE PADS 43 5/8 X 10 7/8 ASTM D 4727, CF, DOM, S/W
3 2 END PADS 44 X 10 7/8 ASTM D 4727, CF, DOM, S/W
2 4 SKIDS 2 X 4 (NOM) X 46 1/4 ASTM D 6199
1 1 EXTERIOR CONTAINER SEE PACKING
D
D IAW W/O 038/19 19065
SEE
NOTE
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 06 Mar 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-194-0323
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 3
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-194-0323
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
M. RAINES
AutoCAD SHX Text
J. HOLMES
78306
1. PACKER MUST INSURE THAT TWO AFTO FORMS 20 OR EQUIVALENT ARE ATTACHED ONE TO THE ITEM AND ONE TO THE CONTAINER, INDICATING THE ITEM HAS BEEN PURGED FOR STORAGE IAW T.O. 35-1-4 BEFORE PLACING ITEM INTO CONTAINER.
2. PACKER MUST INSURE THAT THE CELLS ARE PRESERVED, FOLDED AND WRAPPED PROPERLY BEFORE PLACING IN CONTAINER. CELLS MUST BE FOLDED ONCE WITH A 4 INCH DIAMETER ROLL OF SINGLE-FACE PAPERBOARD, A-A-1051, TYPE III, STYLE 1, INSERTED INSIDE THE FOLD
TO PREVENT CREASING.
3. BEFORE PLACING CELLS INTO CONTAINER, THE CONTAINER MUST BE CHECKED FOR PROTRUDING NAILS AND DEBRIS THAT COULD SCUFF
OR DAMAGE ITEM.
4. AFTER THE CELLS ARE PACKED INTO CONTAINER, NO NAILS, STAPLES, TACKS, ETC., SHALL BE DRIVEN INTO CONTAINER. USE STRAPPING
ONLY FOR CLOSURE .
5. ALL VOIDS IN CONTAINER MUST BE FILLED WITH PPP-C-1797 TO RESTRICT MOVEMENT OF ITEM.
6. OPENING AND CLOSURE OF CONTAINER SHALL BE OF THE UNNAILED CLOSURE ONLY.
7. REPAIRABLES SHALL BE PACKAGED AS SHOWN HEREON. LEVEL "B" SHALL APPLY.
8. MARL P/N 5 (TOP ONLY) WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.
9. PLYWOOD USED IN CONSTRUCTION OF CONTAINER SHALL CONFORM TO PS1-09 STANDARD INTERIOR WITH EXTERIOR GLUE, GRADE C/D.
10. SPECIFICATION ORDERING DATA NOT SPECIFIED (STYLE, TYPE, CLASS, GRADE, ETC.) SHALL BE THE PACKERS OPTION.
11. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
12. CAUTION: FOR PROPER HANDLING AND PROTECTION, CONSULT T.O. 00-85A-03-1 BEFORE HANDLING CELLS. WHEN NEW CELLS ARE REMOVED FROM CONTAINER, TAG STATING "NEW CELLS - PURGING NOT REQUIRED" WILL BE REMOVED.
13. PRESERVATION: EXCEPT FOR GOODYEAR NYLON (VITHANE) FUEL CELLS, REPAIRABLE AND SERVICEABLE CELLS WHICH ARE GOING TO REMAIN WITHOUT FUEL FOR MORE THAN 72 HOURS SHALL HAVE THE INNER LINING FOGGED WITH MIL-PRF-6081E TO PREVENT DRYING AND CRACKING OF INNER LINER. COVER EXPOSED SEALANT WITH TAPE CONFORMING TO AMS-T-22085, TYPE II, TO PREVENT SEALANT FROM COMING IN CONTACT WITH OIL. ALL EXTERIOR SURFACES OF CELLS, EXPOSED METAL SURFACES OR FITTINGS AND ATTACHMENTS SUSCEPTIBLE TO CORROSION SHALL BE CLEANED IAW MIL-STD-2073 AND PRESERVED WITH A LIGHT COAT OF MIL-PRF-6081E.
THE SAME SHALL BE COVERED WITH MIL-PRF 121 AND TAPED IN PLACE WITH AMS-T-22085, TYPE II. USED (VITHANE) FUEL CELLS SHALL HAVE
THE INSIDE CLEANED WITH SOAP AND WARM WATER.
TANK, FUEL, AIRCRAFT
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-194-0323
AutoCAD SHX Text F00-194-0323
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
SHEET 2 OF 3
TANK, FUEL, AIRCRAFT
COMPUTER GENERATED
AutoCAD SHX Text F00-194-0323
AutoCAD SHX Text F00-194-0323
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SHEET 3 OF 3
AutoCAD SHX Text
TYP 4 PLCS
AutoCAD SHX Text
THICKNESS OF BOX PANEL
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
UNSERVICEABLE METHOD: 10
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-197-1097
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
CLOSURE:
LEVEL A: IAW ASTM D 6251
LEVEL B: IAW ASTM D 6251
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6251 A III 2
B ASTM D 6251 A III 2
LEVEL A LEVEL B
GROSS CU FT 16.08 16.08
GROSS WT LBS 49.50 49.50
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 58 3/4 36 6 3/4
LEVEL B 58 3/4 36 6 3/4
CNTNR O.D.
LEVEL A 61 3/4 37 1/2 12
LEVEL B 61 3/4 37 1/2 12
ITEM DIM: 55 31 2 1/2
ITEM WT LBS: 16
MULTIPLE
RUDDER ASSY.
14 2 ENDS 36 X 6 3/4 X 1 1/2 ASTM D 6199, <9>
13 2 SIDES 613/4 X 6 3/4 X 3/4 ASTM D 6199, <9>
12 A/R STRAPPING CLOSURE & REINFORCEMENT ASTM D 3953
11 A/R ADHESIVE A-A-59692, <5>
10 6 SKIDS 2 X 4 (NOM) X 37 1/2 ASTM D 6199, <10>
9 1 ITEM WRAP 82 X 93 1/2 A-A-3174
8 1 BLOCK 31 X 3 X 1 A-A-59136, <5>
7 1 INSERT 34 X 3 X 1 A-A-59136, <5>
6 4 INSERT 1 X 2 (NOM) X 6 ASTM D 6199, <4>
5 1 INSERT 36 X 6 3/4 X 2 A-A-59136, <3>, <5>, DET. 4
4 1 INSERT 36 X 6 3/4 X 2 A-A-59136, <3>, <5>, DET. 3
3 1 END PAD 36 X 6 3/4 X 1 A-A-59136, <3>, <5>, DET. 2
2 1 END PAD 36 X 6 3/4 X 1 A-A-59136, <3>, <5>, DET. 1
1 1 EXTERIOR CONTAINER SEE PACKING, <9>
M
M IAW W/O 026/19 19031
SEE
NOTE
9 & 11
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 31 Jan 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
(UNNAILED CLOSURE)
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-197-1097
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 4
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
C. CORBIN
AutoCAD SHX Text
J. HOLMES
AutoCAD SHX Text 73152
F00-197-1097
RUDDER ASSY.
1. CONTAINER CLOSURE, SEALING AND REINFORCEMENT SHALL BE IAW ASTM D 6251.
2. REPAIRABLES SHALL BE PACKAGED AS SHOWN HEREON.
3. MARK P/N's 2, 3, 4 & 5 WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.
4. ATTACH P/N 6 TO CONTAINER BY NAILING IN POSITIONS SHOWN ON DRAWING.
5. USE ADHESIVE P/N 11 TO LAMINATE P/N 2 TO P/N 4 AND P/N 3 TO P/N 5 AND TO LAMINATE P/N's 7 & 8 TO CONTAINER IN POSITION AS SHOWN
ON DRAWING.
6. PLYWOOD USED IN CONSTRUCTION OF CONTAINER SHALL CONFORM TO PS 1-90, STANDARD INTERIOR WITH EXTERIOR GLUE, GRADE C/D.
7. SPECIFICATION ORDERING DATA NOT SPECIFIED (STYLE, TYPE, CLASS, GRADE ETC.) SHALL BE THE PACKERS OPTION.
8. OD REFLECTED ON THESE INSTRUCTIONS REPRESENT LEVEL B PACKING.
9. THE CONTAINER SIDES P/N 13 SHALL BE CONSTRUCTED OF 3/4 X 6 3/4 (ACTUAL) X 61 3/4 LUMBER AND THE ENDS P/N 14 OF 1 1/2 X 6 3/4
(ACTUAL) X 36 LUMBER. TOP UNNAILED CLOSURE & BOTTOM SHALL BE CONSTRUCTED IAW ASTM D 6251, STYLE A, (CLEATED PLYWOOD)
10. CONTAINERS CONSTRUCTED USING PREVIOUS REVISIONS OF THIS SPI ARE ACCEPTABLE, PROVIDED CONTAINERS ARE MODIFIED
TO ADD P/N 10.
11. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL
(WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text F00-197-1097
AutoCAD SHX Text F00-197-1097
COMPUTER GENERATED
AutoCAD SHX Text F00-197-1097
AutoCAD SHX Text F00-197-1097
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SHEET 3 OF 4
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CONTAINER
AutoCAD SHX Text
TOP
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-197-1097
AutoCAD SHX Text F00-197-1097
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SHEET 4 OF 4
AutoCAD SHX Text
AutoCAD SHX Text 1 1/8
AutoCAD SHX Text 1 1/8
AutoCAD SHX Text
AutoCAD SHX Text
DETAIL-1
AutoCAD SHX Text P/N 2
AutoCAD SHX Text
DETAIL-3 P/N 4
AutoCAD SHX Text
DETAIL-2 P/N 3
AutoCAD SHX Text 1 1/8
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 1 1/8
AutoCAD SHX Text
DETAIL-4 P/N 5
AutoCAD SHX Text 21 7/8
AutoCAD SHX Text 2 1/2 R.
AutoCAD SHX Text 2 1/2
AutoCAD SHX Text 22 1/2
AutoCAD SHX Text 1 1/2
3 7/8
SERVICEABLE METHOD: 53
UNSERVICEABLE METHOD: OMIT P/N's 15 & 17
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-205-8817
B) REUSABLE CONTAINER
DO NOT DESTROY
C) UP ARROW MARKINGS REQUIRED
D) METHOD 50 MARKINGS REQUIRED
E) TO OPEN REMOVE BOTTOM LAG BOLTS
CLOSURE:
LEVEL A: IAW ASTM D 6256
LEVEL B: IAW ASTM D 6256
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 6256 / D 6256 M A I 2
B ASTM D 6256 / D 6256 M A I 2
LEVEL A LEVEL B
GROSS CU FT 16.4 16.4
GROSS WT LBS 255 255
DESIGN FRAGILITY G 60 60
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 51 5/8 24 14 1/4
LEVEL B 51 5/8 24 14 1/4
CNTNR O.D.
LEVEL A 53 7/8 25 1/4 20 1/2
LEVEL B 53 7/8 25 1/4 20 1/2
ITEM DIM: 33 19 1/2 10 1/4
ITEM WT LBS: 195
3173011-175 MULTIPLE
TRANSMITTER, RADAR
13A 1 BACKUP BOARD 1/4 X 4 X 17 A-A-55057, TY. A, <9>
13 1 BLOCK 1 1/2 X 4 (ACTUAL) X 17 ASTM D 6199, <3>, <4>, <9>, DET. 3
12A 1 BACKUP BOARD 1/4 X 4 X 18 A-A-55057, TY. A, <9>
12 1 BLOCK 1 1/2 X 4 (ACTUAL) X 18 ASTM D 6199, <3>, <4>, <9>, DET. 2
11 4 PLATE 3 X 3 X 1/2 A-A-55057, TY. A
10 4 RESTRAINING PADS 3 X 3 X 3 A-A-59136, TY. I, CL. 3, <5>, <7>
9 1 MOUNTING BOARD 42 5/8 X 20 X 3/4 A-A-55057, TY. A, <4>, DET. 1
8 2 CUSHIONING 20 X 7 X 2 A-A-59136, TY. I, CL. 3
7 4 CARR. BOLT W/NUT & WASHER 3/8 DIA. X 9 1/2 ASME B 18.5, <5>
6 4 CARR. BOLT W/NUT & WASHER 3/8 DIA. X 4 1/2 ASME B 18.5
5 2 HEADERS 2 X 4 (NOM) X 24 ASTM D 6199
4 8 RUBBING STRIPS 2 X 6 (NOM) X 12 ASTM D 6199, <8>
3 2 SKIDS 2 X 6 (NOM) X 53 7/8 ASTM D 6199
2 1 FLOORING 53 7/8 X 24 X 3/4 A-A-55057, TY. A, <3>
1 1 EXTERIOR CONTAINER SEE PACKING, <1>, <11>, <13>, <14>, <18>
P
P REVISED IAW W/O 010/19 19024
SEE NOTE 18
DISTRIBUTION D: Distribution authorized to DoD and U.S. DoD contractors only, Administrative or Operational Use, 24 Jan 19.
Other requests for this document shall be referred to 406 SCMS/GULAA Packaging Office, Robins AFB, GA 31098.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
LTR
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
SPI NO (TPO)
AutoCAD SHX Text
NATIONAL STOCK NO.
AutoCAD SHX Text
PART OR DRAWING NO.
AutoCAD SHX Text
CURR REV
AutoCAD SHX Text
ORIG DATE
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text 98752
AutoCAD SHX Text
ILL
AutoCAD SHX Text
AUTH
AutoCAD SHX Text
CHK
AutoCAD SHX Text
PS
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
SHEET 1 OF 4
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text
D. BELFLOWER
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text
J. KERR
AutoCAD SHX Text
C. WILLIAMS
AutoCAD SHX Text 80235
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-205-8817
SPI N0.
1. CONTAINER CLOSURE, SEALING AND REINFORCEMENT SHALL BE IAW APPLICABLE SPECIFICATION.
2. REPAIRABLES SHALL BE PACKAGED AS SHOWN HEREON. LEVEL B REQUIREMENTS APPLY EXCEPT BARRIER BAG AND DESICCANT MAY BE
OMITTED.
3. MARK P/N's 2, 12 & 13 WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.
4. SECURE ITEM TO MOUNTING BOARD, P/N 9, UTILIZING P/N's 12, 13 & 14.
5. BOLTS, P/N 7, SHALL PASS THROUGH SKIDS, FLOORING, MOUNTING BOARD, RESTRAINING PADS, AND PLATES. TIGHTEN NUTS TO COMPRESS
PADS, P/N 10, ONE INCH.
6. CUSHION PROTRUSION A/R WITH P/N 19 TO PREVENT RUPTURE OF BARRIER MATERIAL.
7. P/N 10 MAY BE LAMINATED TO REQUIRED THICKNESS USING ADHESIVE P/N 18.
8. RUBBING STRIPS, P/N 4, MAY BE LAMINATED BY NAILING TWO PIECES OF 2 X 6 (NOM) TOGETHER IN LIEU OF 4 X 6 (NOM).
9. SECURE P/N 12A TO 12 AND 13A TO 13 BY NAILING. CUT AS SHOWN IN DETAILS.
10. BARRIER, P/N 17, SHALL PASS BENEATH P/N's 12 & 13.
11. PLYWOOD USED IN CONSTRUCTION OF CONTAINER SHALL CONFORM TO PS 1-09 STANDARD INTERIOR WITH EXTERIOR-TYPE GLUE, GRADE C/D.
12. SPECIFICATIONS ORDERING DATA NOT SPECIFIED (STYLE, TYPE, CLASS, GRADE, ETC.) SHALL BE THE PACKERS OPTION.
13. CONTAINER SUPERSTRUCTURE SHALL BE OF PLYWOOD.
14. ASTM D 6256 CONTAINER SHOULD BE USED AS PRIME PACK. ISOPOD CONTAINERS, NSN: 8145-01-010-5606CW ARE TO BE USED WHEN
AVAILABLE.
15. ALL BOLTS PASSING THROUGH SKIDS SHALL BE COUNTERSUNK.
16. CONTAINERS CONSTRUCTED USING PREVIOUS REVISION OF THIS SPI ARE ACCEPTABLE.
17. EXEMPT FROM POP TESTING. FIELD STRENGHT OF LESS THAN 0.00525 AT 15 FEET.
18. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING:
PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.
19 A/R CUSHIONING PPP-C-1797, <6>
18 A/R ADHESIVE FOR LAMINATION QPL-MMM-A-1617, <7>
17 1 BARRIER BAG 33 X 48 MIL-E-6060, <10>
16 1 WRAP FOR ITEM 62 X 45 A-A-3174, TY. I, CL. I, GR. A, FIN. I
15 32 UNITS DESICCANT MIL-D-3464, TY. II
14 4 CARR. BOLT W/NUT & WASHER 3/8 DIA. X 5 1/2 ASME B 18.5, <4>
TRANSMITTER, RADAR
AutoCAD SHX Text 1 jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
COMPUTER GENERATED
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text
SPI N0.
AutoCAD SHX Text
PART
AutoCAD SHX Text
NO.
AutoCAD SHX Text
QTY.
AutoCAD SHX Text
MATERIAL SPECIFICATION
AutoCAD SHX Text
SIZE (INCHES UNLESS SPECIFIED)
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NOMENCLATURE OR
AutoCAD SHX Text
TOLERANCES ON FRAC. 1/8,
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
DECIMAL .01, ANGLES 1 .
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text O
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
TRANSMITTER, RADAR
COMPUTER GENERATED
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SHEET 3 OF 4
AutoCAD SHX Text 2"
AutoCAD SHX Text
TYP.
AutoCAD SHX Text 1"
AutoCAD SHX Text 1 1/8
AutoCAD SHX Text
TYP.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 42 5/8
AutoCAD SHX Text
CONTAINER
AutoCAD SHX Text
TOP
AutoCAD SHX Text
AutoCAD SHX Text 13A
AutoCAD SHX Text
AutoCAD SHX Text 12A
TRANSMITTER, RADAR
COMPUTER GENERATED
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text F00-205-8817
AutoCAD SHX Text 1 Jan 86
AutoCAD SHX Text form
AutoCAD SHX Text
DD 2169 MOD
AutoCAD SHX Text
SPI NO.
AutoCAD SHX Text
SPI NO. (TPO)
AutoCAD SHX Text
CODE ID
AutoCAD SHX Text
ITEM NOMENCLATURE
AutoCAD SHX Text 98752
AutoCAD SHX Text C
AutoCAD SHX Text
SPECIAL PACKAGING INSTRUCTION
AutoCAD SHX Text
SHEET 4 OF 4
AutoCAD SHX Text
DETAIL-1
AutoCAD SHX Text P/N 9
AutoCAD SHX Text 32 7/8
AutoCAD SHX Text
TYP.
AutoCAD SHX Text 4 7/8
AutoCAD SHX Text
TYP.
AutoCAD SHX Text
4 TYP.
AutoCAD SHX Text 9 1/2
AutoCAD SHX Text
TYP.
AutoCAD SHX Text
DETAIL-2
AutoCAD SHX Text P/N's 12 & 12A
AutoCAD SHX Text
AutoCAD SHX Text 9 1/2
AutoCAD SHX Text 2 1/8
AutoCAD SHX Text
TYP.
AutoCAD SHX Text
3 TYP.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 9 1/2
AutoCAD SHX Text
AutoCAD SHX Text
DETAIL-3
AutoCAD SHX Text P/N's 13 & 13A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 3/4
AutoCAD SHX Text 1 1/2
AutoCAD SHX Text
7/16 DIA.
AutoCAD SHX Text
4 PLCS.
AutoCAD SHX Text
7/16 DIA.
AutoCAD SHX Text
2 PLCS.
AutoCAD SHX Text
7/16 DIA.
AutoCAD SHX Text
2 PLCS.
AutoCAD SHX Text
CENTERED
AutoCAD SHX Text
CENTERED
(SIDE VIEW)
UNSERVICEABLE METHOD: 10
QUP: 001
ICQ: 000
CLEANING & DRYING: IAW MIL-STD-2073
PRESERVATIVE: N/A
MARKING: IAW MIL-STD-129
SPECIAL MARKINGS:
A) SPI NO. F00-256-0187
B) REUSABLE CONTAINER & DUNNAGE -
DO NOT DESTROY.
CLOSURE:
LEVEL A: IAW ASTM D 7478
LEVEL B: IAW ASTM D 7478
PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS
LEVEL SPEC STYLE TYPE CL VRTY GR TR
A ASTM D 7478 A III 2
B ASTM D 7478 A III 2
LEVEL A LEVEL B
GROSS CU FT 2013.88 2013.88
GROSS WT LBS 5365 5365
DESIGN FRAGILITY G 110 110
LENGTH WIDTH DEPTH
CNTNR I.D.
LEVEL A 238 112 110
LEVEL B 238 112 110
CNTNR O.D.
LEVEL A 240 116 125
LEVEL B 240 116 125
ITEM DIM: N/A
ITEM WT LBS: N/A
MULTIPLE
C5 AFT PRESSURE DOOR
15 2 BRACE 2 X 4 (NOM) X 112 ASTM D 6199
14 1 BLOCK 2 X 4 (NOM) X 112 ASTM D 6199
13 2 PAD 1/4 X 6 X 7 A-A-55057
12 1 BRACE 2 X 4 (NOM) X 117 ASTM D 6199
11 2 SPACER 2 X…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.