Attachment_1_SPI_AM13028723_dated_150527.pdf

PDF 3 MB Posted Mar 15, 2016

Attached to: Box Kits to pack the M2A1 Machine Gun Federal contract opportunity
Solicitation number: SP3300-16-Q-0170
Issued by: Defense Logistics Agency Distribution

About this file

From the source

Attachment 1-SP3300-16-Q-170 - SPI

View the file

Other files for this federal contract opportunity

Other files attached to Box Kits to pack the M2A1 Machine Gun, newest first.
File	Type	Posted
Amendment_1_SP330016Q0170.pdf	PDF	Mar 18, 2016
Solicitation_SP330016Q0170.docx	DOCX document	Mar 15, 2016
Attachment_2-Schedule_of_Supplies-SP330016Q0170.xlsx	XLSX spreadsheet	Mar 15, 2016

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 13

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN,CAL .50, M2A1 QUICK CHANGE BARREL W/ BII 19200 AM 13028723

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-511-1250 150527 B/L15K2036

7. QUP / UNIT OF

ISSUE

8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.

FT.)(0.000)

11. UNIT PACK SIZE (INCHES)(00.0)

1 EA 135.0 5.477 52.0 X 14.0 X 13.0

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 41 1 1 SEE TEXT FOR DETAILED INSTRUCTIONS

13. CLEANING

*AND NOTES – Page 2

14. DRYING

*AND NOTES- Page 2

15. PACKING

a. LEVEL A

MIL-STD-2073-1

b. LEVEL B

MIL-STD-2073-1

16. MARKING

MIL-STD 129 AND NOTES- PAGE 4

17. NOTES/DRAWINGS

SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY.

INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE

SPECIFIED HEREIN.

TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.

* ITEMS SHALL BE CLEANED AND DRIED BY ANY PROCESS THAT IS NOT INJURIOUS TO THE ITEM. ALL ITEMS SHALL PASS THE

APPLICAL CLEANING AND DRYING INSPECTION REQUIREMENTS OF MIL –STD-2073-1.

GENERAL REQUIREMENTS

MATERIALS, METHODS, PROCESSES, AND PROCEDURES THAT ARE NOT SPECIFIED HERE SHALL CONFORM TO THE

REQUIREMENTS OF MIL-STD-2073-1.

ALL GUN COMPONENTS AND BASIC ISSUE ITEMS RECEIVED AS GOVERNMENT FURNISHED EQUIPMENT (GFE) PACKAGED AS SPECIFIED HEREIN SHALL NOT BE REPACKED. GFE COMPONENTS AND BASIC ITEMS NOT PACKAGED AS SPECIFIED

HEREIN SHALL BE REPACKAGED IN ACCORDENCE WITH BELOW REQUIREMENTS.

ITEMS PRESERVED USING BAGS CONSTRUCTED FROM NON –TOXIC ,TRANSPARENT ,POLYETHYLENE FILM HAVING A MULTI- METAL VOLATILE CORROSION INHIBITOR SHALL BE IN ACCORDANCE WITH ARDEC DRAWING 13027484.

BAGS SHALL BE CONSTRUCTED BY FOLDING ONE SHEET OF MATERIAL AND SHALL HAVE TWO SIDE SEAMS. SIDE SEAMS SHALL BE PARALLEL TO EACH OTHER AND TO THE OUTER EDGES OF THE BAG. THE BOTTOM FOLD SHALL BE AT RIGHT ANGLES TO THE SIDE OF THE SEAMS. FINAL CLOSURE SHALL BE A HEAT SEAL AT THE TOP OF THE BAG.

ALTERNATELY, BAGS CONSTRUCTED FROM TUBING SHALL HAVE HEAT SEAL AT THE BOTTOM OF THE BAG WITH FINAL

CLOSURE BEING A HEAT SEALED SEAM AT THE TOP EDGE OF THE BAG.

WSC: HH ITEM SIZE: 51.0 x 12.75 x 10.5 ITEM WEIGHT 115.00 APPROVED: CHRIS APPLEGATE yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text

ATTACHMENT 1: SP3300-15-R-0008

yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text yre2169 Typewritten Text

UPDATED VIA AMENDMENT 0001

yre2169 Typewritten Text

DD Form 2169, JUN 97 Previous editions are obsolete Page 2 of 13

SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET)

Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF DRAWING/ SPI

150527

6. REVISION / ERR NO.

B/L15K2036

17. NOTES/DRAWINGS

BASIC ISSUE ITEMS

QTY PER

PACK

ITEM

CAGE CODE

NATIONAL STOCK

NUMBER

DRAWING NUMBER/

SPECIFICATION NUMBER

EXTRACTOR, RUPTURED

CARTRIDGE CASE

19205

4933-00-716-0041 7160041

1 MITTEN, HEAT PROTECTIVE

81349

8415-01-092-0039

MIL-M-11199

OPERATOR’S MANUAL, MACHINE

GUN, CALIBER .50: M2A1

NONE TM 9-1005-347-10

1 CARRIER ASSEMBLY, BARREL

19200

1005-01-539-3410 13027981

1 BARREL ASSEMBLY

19200

1005-01-541-2478 13027965

DETAILED PRESERVATION ,PACKAGING AND PACKING REQUIREMENTS

MATERIALS, METHODS, PROCESS AND PROCEDURES SPECIFIED HEREIN SHALL CONFORM TO THE REQUIREMENTS OF MIL – STD-2073-1

1. CLEANING: THE MACHINE GUN SHALL BE DISASSEMBLED AS NECESSARY TO ACCOMPLISH THE REQUIRED CLEANING

SPECIFIED HEREIN AND IN THE OPERATOR’S MANUAL. ALL SURFACES SHALL BE CLEANED BY ANY APPLICABLE METHOD

WHICH DOES NOT CAUSE DAMAGE TO THE ITEM.

SPECIAL CLEANING (BURNED POWDER RESIDUE): SURFACES OF COMPONENTS SUBJECTED TO A BURNED POWDER RESIDUE SHALL BE SCRUBBED CLEAN WITH BRISTLE BRUSHES AND/OR SWABS SATURATED WITH RIFLE BORE CLEANER CONFORMING

TO MIL-PRF-372. FLUSH THE SCRUB SURFACES WITH MIL-PRF- 680 SOLVENT

SPECIAL CLEANING OF EXTRACTOR: EACH ITEM SHALL BE CLEANED WITH MIL-PRF-680 SOLVENT FOLLOWED BY A RINSE IN A CLEAN

SOLVENT PRIOR TO PACKAGING.

DRYING: ALL CLEANED SURFACES SHALL BE THOROUGHLY DRIED PRIOR TO PRESERVATIVE APPLICATION. DRYING OF BARREL

BORE AND CHAMBER SHALL BE ACCOMPLISHED USING CLEAN, DRY LINT-FREE SWABS.

2. APPLICATION OF PRESERVATIVE: ALL METALLIC SURFACES OF THE MACHINE GUN SHALL BE COATED WITH EITHER MIL-PRF-3150 OR MIL-PRF-16173, GRADE 3 PRESERVATIVE, APPLIED BY ANY APPLICABLE PROCEDURE.

EXCESS OIL SHALL BE THOROUGHLY DRAINED FROM COATED SURFACES. PRESERVED MACHINE GUN SHALL BE ALLOWED TO DRY FOR A MINIMUM OF ONE (1) HOUR PRIOR TO UNIT PACK. LUBRICANTS CONTAMINATED OR REMOVED DURING THE CLEANING PROCESS SHALL BE REAPPLIED IN ACCORDANCE WITH THE APPLICABLE

DRAWING REQUIREMENTS.

3. NOTE: MARK EACH INNER AND OUTER BOX TOP FLAPS IN ¾” BLACK, BLOCK TYPE:

“REUSABLE CONTAINER. DO NOT DESTROY. TO REMOVE CONTENTS, CUT ONLY ON TAPED OUTER EDGES OF BOX.”

DD Form 2169, JUN 97 Previous editions are obsolete Page 3 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/ BII 19200 AM 13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF DRAWING/ SPI

150527

6. REVISION / ERR NO.

B/L15K2036

17. NOTES/DRAWING

BILL OF MATERIALS

OPERATION NUMBER ITEM

TAPE. ASTM D5486/D5486M. AS REQUIRED

1 BARREL BAGS - 2 EA. 7" X 54". MIL-DTL-22020E, TYPE I

PPP-T-495 OR COMMERCIAL EQUIVALENT WITH A MINIMUM WALL THICKNESS

OF 0.13 INCHES. SPIRAL WOUND FIBER TUBES WITH CAP ENDS - 2 EA. 3" X 48"

3 RECEIVER WRAP - 1 EA. 36" X 48". MIL-PRF-22019E, TYPE I, CLASS I.

BOTTOM FOAM SUPPORT ASSEMBLY - 1 EA. SEE PAGES 6, 7, AND 8

TOP FOAM SUPPORT ASSEMBLIES - 2 EA. SEE PAGES 6, 7, AND 8

INTERIOR CONTAINER - 1 EAC. ASTM D5118/D5118M, STYLE FOL, GRADE V3c, CLASS WR. ID: 49.5" X 12.25" X 10.0"

BAGS. MIL-DTL-22020E, TYPE I

2 EA. FOR NESTED CARRY ASSEMBLIES, BARREL. 8" X 9"

1 EA. FOR RUPTURED CASE EXTRACTOR. 8" X 9"

BII CONTAINER - 1 EA. ASTM D5118/D5118M, RSC, W5c. ID: 5.0" X 3.0" X 7.25"

9 BARRIER BAG - 1 EA. MIL-PRF-131K, CLASS 1. ID: 31.0" X 68.0"

OUTER CONTAINER - 1 EA. ASTM D5118/D5118M, STYLE FOL, GRADE V3c, CLASS WR ID: 50.5" X 14.0" X 11.5"

SEE PAGE 4.

ITEM NUMBER PART NUMBER DESCRIPTION QUANTITY

1 906572 FIBERBOARD BOXES, BARRIER BAG AND FOAM INSERTS

Set consists of: 906571 ONE - OUTER FIBERBOARD BOX, ASTM-D5118/D5118M V3c-FOL STITCH

OUT, I.D 50.5 X 14.0 X 11.5 MARKING ON OUTER AND INNER FLAPS IN .75

BLACK, BLOCK LETTERING, ALL CAPITALS: "REUSABLE CONTAINER. DO

NOT DESTROY. TO REMOVE CONTENTS, CUT TAPE ONLY ON OUTER SIDE

EDGES OF BOX."

10-25008-00 ONE - INNER FIBERBOARD BOX, ASTM-D5118/D5118M V3c-FOL STITCH, I.D.

49.5 X 12.25 X 10.0 MARKING: SAME AS OUTER BOX ABOVE

905178 ONE - BARRIER BAG, MIL-PRF-131K, CL1, ID 31.0 X 68.0

906570 ONE SET - PRE-FORMED THREE PIECE FOAM INSERT SET PER SPI

AM13028723

2 906016 BII BOX, ASTM D5118/D5118M, RSC, W5c, GLUE IN. ID: 5.0" X 3.0" X 7.25"

3 902524 BARREL BAG, MIL-DTL-22020E, TYPE I. ID: 7.0 X 54.0 2

4 914534 BARREL TUBES. PPP-T-495, TYPE 2, STYLE D, CLASS 2. ID: 3.0 X 48.0 2

5 902504 BAGS, EXTRACTOR AND CARRY HANDLES MIL-DTL-22020, TYPE I. ID: 8.0

X 9.0

6 905204 MANUAL BAG, MIL-DTL-117, CL B, STY 2, 8.0 X 11.5 1

7 905202 MITTEN BAG, MIL-DTL-117, CL B, ST 2, 7.0 X 21.0 (ROLL STOCK) 1

8 905515 RECEIVER WRAP, MIL-PRF-22019E, TYPE I, CLASS 1. 36.0 X 48.0 1

9 ASTM D5486/D5486M TAPE AS REQUIRED

NOTE: ALL DIMENSIONS ARE INNER DIMENSIONS IN INCHES. BAG DIMENSION MEASUREMENTS ARE BETWEEN INNER SEAL EDGES.

1 SET

PART NUMBER REFERENCE

M2 / M2A1

DD Form 2169, JUN 97 Previous editions are obsolete Page 4 of 13

SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET) Form Approved

Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for fai ling to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF DRAWING/ SPI

150527

6. REVISION / ERR NO.

B/L15K2036

17. NOTES/DRAWINGS

DETAILED OPERATIONS

OPERATION #

1. Place each barrel into barrel bag and heat seal. (SEE PHOTO Pg. 10)

2. Place each bagged barrel into fiber tube and seal ends with ASTM D5486 tape.

3. Wrap receiver tightly in MIL-PRF-22019 material and secure material with tape. (SEE PHOTO Pg. 10)

4. Place bottom foam support assembly into inner container with receiver end butted firmly to left end of container and side of assembly firmly to one side to allow placement of packaged barrels on one side. (SEE PHOTO Pg. 11)

5. As applicable, place manual and mitten into center of bottom support assembly.

(Prepackaged items need not be repackaged before placement into pack.) (SEE PHOTO Pg. 11)

6. Place wrapped receiver into formed receiver section of bottom support assembly. (SEE PHOTO Pg. 12)

7. Stack tubes containing barrels into container between container wall and support assembly. (SEE PHOTO Pg. 12)

8. As applicable, place ruptured case extractor and Handle Assembly into BII container and tape closed. Place BII container into bottom support assembly. (SEE PHTO Pg. 12)

9. Insert inner container into MIL-PRF-131K, Class 1, barrier bag. Partially heat seal open end. Exhaust air with vacuum source and complete heat seal. (SEE PHOTO Pg.12)

10. Place sealed inner container into outer container and seal all seams with ASTM D5486 tape. Insure proper labeling and marking in accordance with this instruction and MIL STD 129.

SPECIAL MARKING

A) SERIAL NUMBER: SERIAL NUMBER MARKING IS REQUIRED AND SHALL BE LISTED ON THE BAR COD LABELS.

B) BAR CODE LABELS: ONE ADDITIONAL BAR CODE LABEL WILL BE LOCATED ON THE OUTBOARD SIDE OF EACH SHIPPING CONTAINER AFTER CONTAINERS ARE PALLETIZED, ALLOWING THE NATIONAL STOCK NUMBER AND GUN SERIAL NUMBER TO BE

READ WITH OUT HAVING TO UNLOAD FROM PALLETIZED LOAD.

C) INNER AND OUTER CONTAINERS SHALL BE MARKED ON TOP SURFACE IN MINIMUM ONE HALF INCH TEXT AS FOLLOWS:

“REUSABLE PACKAGING- DO NOT DESTROY” AND “ TO OPEN-CUT TAPE ONLY ALONG TOP TAPE SEAMS”

PALLETIZATION: Palletize 15 containers per 72” x 48” heat treated wood pallet and secure with stretch wrap.

(SEE PHOTO Pg. 13) In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry.”

DD Form 2169, JUN 97 Previous editions are obsolete Page 5 of 13

SPECIAL PACKAGING INSTRUCTION (Continuation sheet)

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters

Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-511-1250 150527 B/L15K2036

17. NOTES / DRAWINGS CONTINUED

PACKAGING EXPLODED VIEW

EXTERIOR

CONTAINER

FOAM SUPPORT,

TOP LEFT

FOAM SUPPORT,

TOP RIGHT

M2 MACHINE

GUN

(ADD WRAP TO

WEAPON)

BOTTOM FOAM

SUPPORT ASSEMBLY

BARREL

TUBE x 2

INTERIOR

CONTAINER

(ADD

BARRIER BAG

AND SEAL)

LEFT SIDE

RIGHT SIDE

DD Form 2169, JUN 97 Previous editions are obsolete Page 6 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-511-1250 150527 B/L15K2036

FIGURE 1: FOAM SUPPORT ASSEMBLY

*GLUE BOTTOM FOAM SUPPORTS TO BOTTOM FIBERBOARD FOAM SUPPORT, BASE PRIOR TO PACKING.

FIGURE 2: INTERIOR CONTAINER DIMENSIONS

TOP FOAM SUPPORT, LEFT

TOP FOAM SUPPORT, RIGHT

BOTTOM FOAM SUPPORT, LEFT

BOTTOM FOAM SUPPORT, RIGHT

BOTTOM FIBERBOARD FOAM SUPPORT,

BASE* (ASTM D4727/D4727M, TYPE SF OR

CF, GRADE 200 OR MORE)

INTERIOR CONTAINER

NOTES:

01) THE TWO (2) BOTTOM FOAM SUPPORT BLOCKS (FIGURES 3 AND 4) ARE GLUED TO FIBERBOARD BASE

(FIGURE 7) AS SHOWN IN FIGURE 1.

02) ALL FIP MATERIAL – SEALED AIR G-FLEX

03) CLOSING METHOD – TAPE – MEETS ASTM D1974/D1974M, SEALING METHOD B. TAPE 3” 3M 351.

DD Form 2169, JUN 97 Previous editions are obsolete Page 7 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

FIGURE 3: BOTTOM FOAM SUPPORT, LEFT - DETAILED DIMENSIONS

FIGURE 4: BOTTOM FOAM SUPPORT, RIGHT - DETAILED DIMENSIONS

DD Form 2169, JUN 97 Previous editions are obsolete Page 8 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

FIGURE 5: FOAM SUPPORT, TOP LEFT - DETAILED DIMENSIONS

FIGURE 6: FOAM SUPPORT, TOP RIGHT - DETAILED DIMENSIONS

FOAM SUPPORT, TOP RIGHT END

DD Form 2169, JUN 97 Previous editions are obsolete Page 9 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

FIGURE 7: BOTTOM FIBERBOARD FOAM SUPPORT, BASE - DETAILED DIMENSIONS

**NOTE: BOTTOM FIBERBOARD FOAM SUPPORT, BASE SHALL HAVE BOTH BOTTOM FOAM SUPPORTS

ADHERED TO IT PRIOR TO PACKING.

FIGURE 8: FOAM SUPPORT, TOP RIGHT END - DETAILED DIMENSIONS

DD Form 2169, JUN 97 Previous editions are obsolete Page 10 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF

DRAWING/SPI(YYMMDD)

150527

6. REVISION / ERR NO.

OPERATION #1: BARREL BAG AND TUBE

OPERATION #3: RECEIVER WITH WRAP

DD Form 2169, JUN 97 Previous editions are obsolete Page 11 of 13

Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a col lection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF

DRAWING/SPI(YYMMDD)

150527

6. REVISION / ERR NO.

OPERATION #4: BARREL TUBE AND BOTTOM FOAM SUPPORT PLACEMENT

OPERATION 5: TM, MITTEN AND BII BOX PLACEMENT

DD Form 2169, JUN 97 Previous editions are obsolete Page 12 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF

DRAWING/SPI(YYMMDD)

150527

6. REVISION / ERR NO.

OPERATION #6 - #8: PLACEMENT COMPLETE

OPERATION #9: INTERIOR CONTAINER SEALED AND BAGGED

DD Form 2169, JUN 97 Previous editions are obsolete Page 13 of 13

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.

13028723 MACHINE GUN, CAL .50, M2A1 QUICK CHANGE BARREL W/BII 19200 AM 13028723

4. NATIONAL STOCK NO.

1005-01-511-1250

5.DATE OF

DRAWING/SPI(YYMMDD)

150527

6. REVISION / ERR NO.

FIGURE 9: PALLETIZATION PATTERN

Text1: SP3300-16-Q-0170

File details come from the government source that posted it. Updated Nov 14, 2017.