Combined_Synopsis_and_Solicitation_SP3300-15-Q-0005.docx

DOCX document 77 KB Posted

Attached to
Preventive and Remedial Maintenance for MHE loctacted at DLA Distribution Tobyhanna PA
Solicitation number
SP330015Q0005
Issued by

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SP3300-15-Q-0005

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

Solicitation SP3300-15-Q-0005 is being issued as a full and open competitive Request for Quote (RFQ) after the exclusion of sources and incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-81 effective 13 APR 2015 and Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20150420 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2015-08. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil.

This RFQ is set-aside 100 percent for small business concerns. The North American Industry Classification System (NAICS) code for this acquisition is 811310. The small business size standard is $7.5M.

Description of Requirement: This combined synopsis and solicitation is being issued for the purpose of establishing a Time-and-Materials (T&M) contract for all labor and materials necessary to perform preventative (scheduled) and remedial (unscheduled) maintenance on Government owned materials handling equipment (MHE) located at DLA Distribution Tobyhanna Pennsylvania (DDTP). These services shall be performed in accordance with Attachment 1 – Statement of Work (SOW).

The Service Contract Labor Standards clause applies to this requirement. Wage Determination No. 2005-2543; Revision No. 15 Dated 12/22/2014 will be applicable to a resultant contract award. See Attachment 6 – Wage Determination.

Period of Performance:

Base Year – August 17, 2015 through August 16, 2016 Option Year One – August 17, 2016 through August 16, 2017 Option Year Two – August 17, 2017 through August 16, 2018

The table below serves as the schedule of supplies/services to include: a list of contract line item number(s) (CLINs); item descriptions; quantities; the unit of measure(s); unit price; and total price for each CLIN.

Schedule of Supplies/Services

Item No.
Description
QTY
U/I
Unit Price
Ceiling Price

Base Year 17 Aug 2015 through 16 Aug 2016

CLIN 0001 Firm-Fixed-Price (FFP)

0001
Preventative Maintenance (PM) for Government owned MHE listed at Attachment 2 – DDTP Equipment Inventory. Complete Attachment 7 – Price Breakdown CLINX X001.
12
MO
$___________
$___________

CLINS 0002 through 0004 Time-and-Materials (T&M)

0002
Labor to perform Remedial Maintenance (RM) IAW the attached SOW. The hours shown are an estimate. Contractor will be paid for the actual hours used.
300
HRS
$___________
$___________
0003
Replacement parts for Remedial Maintenance. The dollars shown are an estimate. The contractor will be paid for the actual costs of material used.

$10,000.00

0004
Off-Site Transportation for major repairs of equipment IAW paragraph 2.1 of the SOW. The dollars shown are an estimate. The contractor will be paid for their actual costs of transportation

$1,600.00

Total Base Year Ceiling Price

Item No.
Description
QTY
U/I
Unit Price
Ceiling Price

Option Year One 17 Aug 2016 through 16 Aug 2017

CLIN 1001 Firm-Fixed-Price (FFP)

1001
Preventative Maintenance (PM) for Government owned MHE listed at Attachment 2 – DDTP Equipment Inventory. Complete Attachment 7 – Price Breakdown CLINX X001.
12
MO
$___________
$___________

CLINS 1002 through 1004 Time-and-Materials (T&M)

1002
Labor to perform Remedial Maintenance (RM) IAW the attached SOW. The hours shown are an estimate. Contractor will be paid for the actual hours used.
300
HRS
$___________
$___________
1003
Replacement parts for Remedial Maintenance. The dollars shown are an estimate. The contractor will be paid for the actual costs of material used.

$10,000.00

1004
Off-Site Transportation for major repairs of equipment IAW paragraph 2.1 of the SOW. The dollars shown are an estimate. The contractor will be paid for their actual costs of transportation

$1,600.00

Total Option Year One Ceiling Price

Item No.
Description
QTY
U/I
Unit Price
Ceiling Price

Option Year Two 17 Aug 2017 through 16 Aug 2018

CLIN 2001 Firm-Fixed-Price (FFP)

2001
Preventative Maintenance (PM) for Government owned MHE listed at Attachment 2 – DDTP Equipment Inventory. Complete Attachment 7 – Price Breakdown CLINX X001.
12
MO
$___________
$___________

CLINS 2002 through 2004 Time-and-Materials (T&M)

2002
Labor to perform Remedial Maintenance (RM) IAW the attached SOW. The hours shown are an estimate. Contractor will be paid for the actual hours used.
300
HRS
$___________
$___________
2003
Replacement parts for Remedial Maintenance. The dollars shown are an estimate. The contractor will be paid for the actual costs of material used.

$10,000.00

2004
Off-Site Transportation for major repairs of equipment IAW paragraph 2.1 of the SOW. The dollars shown are an estimate. The contractor will be paid for their actual costs of transportation

$1,600.00

Total Option Year Two Ceiling Price

Total Base Year + Option Years

Delivery Address:

N/A

The following FAR, DFARS, and DLAD provisions and clauses apply to this RFQ. The full text version of these provisions and clauses may be viewed at http://farsite.hill.af.mil/.

Provisions

Addenda to FAR 52.212-1, Instructions to Offerors -- Commercial Items (Apr 2014)

Reference paragraph (c) under referenced provision FAR 52.212-1. This paragraph is tailored to read as follows:

(c) Period of acceptance of offers. The offeror agrees to hold prices in its offer firm for 120 calendar days from the date specified for receipt of offers.

The following paragraphs under referenced provision 52.212-1 are hereby deleted:

(d) Product samples;

(e) Multiple Offers; and

(h) Multiple Awards

Instructions to Offerors

This acquisition will be solicited in accordance FAR subpart 13.5— Permanent Authority for Use of Simplified Acquisition Procedures for Certain Commercial Items, and will include the applicable provisions/clauses for commercial acquisitions IAW FAR part 12 – Solicitation Provisions and Contract Clauses for the Acquisition of Commercial Items.

Quote Submission Instructions –Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award.

1. Quotations may be submitted in contractor format and shall include.

(1) Company name, address, telephone number, e-mail address, FAX number, DUNS Number, Contractor and Commercial and Government Entity (CAGE) Code.

(2) Solicitation number.

(3) Unit Price and extended prices for all CLIN(S). Offerors shall use the Schedule of Supplies beginning on page 1 to complete their pricing. Furthermore, offerors shall complete Attachment 7, Price Breakdown for CLINs X001. The total monthly prices in the Price Breakdown shall match the prices for CLINs X001 in the schedule of supplies.

(4) Past performance information. Past performance information should be submitted from three sources (The Government recommends submission of at least three contracts, but will evaluate any and all submitted) that clearly indicate that offeror has satisfactorily performed Preventive and Remedial Maintenance on MHE within the last five years, and/ or is currently performing Preventive and Remedial Maintenance on MHE. The past performance information shall include the following:

a) Contractor Name

b) Name of the customer/agency

c) Contract/Purchase Order Number

d) Customer points of contact (minimum of two, provide name, telephone number, and e-mail addresses)

e) Length of contract

f) Period of performance (dates)

g) Dollar amount of contract (initial price and final price)

h) Description of product/service provided (include sufficient detail to demonstrate the scope and complexity of the product/service provided)

i) Discussion of the similarities and differences of experience (include sufficient detail to demonstrate similarities/dissimilarities to the requirements of this solicitation).

(5) A completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, or a statement that the offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. If the latter of the two options is selected, then the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this RFQ.

(6) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation).

2. Questions regarding this solicitation prior to the submission of a quote may occur for the purpose of clarifying elements of the solicitation.

(1) Questions shall be submitted by electronic mail to the Contract Specialist, Shane Crusey via email at shane.crusey@dla.mil with the appropriate subject: SP3300-15-Q-0005 Solicitation Question. Question(s) must be received by 12:00p.m. Eastern local time on 21 May 2015. Questions received after this date and time will not receive a response. Answers to questions will be posted to the FEDBIZOPPS website via an amendment to the solicitation.

3. All quote submittals shall be submitted via email to shane.crusey@dla.mil NLT 12:00 PM EDT 08 JUNE 2015.

4. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449.

The following provisions are incorporated by reference

FAR PROVISION
TITLE
DATE
52.204-7
System for Award Management
Jul 2013
52.209-2
Prohibition On Contracting With Inverted Domestic Corporations--Representation
Dec 2014
52.216-31
Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition
Feb 2007
52.222-22
Previous Contracts and Compliance Reports
Feb 1999
52.222-25
Affirmative Action Compliance
Apr 1984
52.225-25
Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certifications
Dec 2012
DFARS PROVISION
TITLE
DATE
252.204-7004
Alternate A, System for Award Management
Feb 2014
DLAD PROVISION
TITLE
DATE

N/A

The following provisions are incorporated in full text

DLAD 52.233-9000 Agency Protests (Sep 1999)

Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity’s Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an “Agency Level Protest under Executive Order No. 12979.” (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer’s decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer.

DLAD 52.233-9001 Disputes: Agreement to use Alternative Dispute Resolution (ADR) (Jun 2001)

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate.

(c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer.

(End of Provision) Addenda FAR 52.212-2 -- Evaluation -- Commercial Items (Oct 2014) Quotes received will be evaluated in accordance with FAR 13.106-2. The Government intends to award a T&M contract resulting from this notice on an all or none basis to the responsible offeror whom: 1) has a past performance record that demonstrates past execution of similar contracts in terms of complexity, magnitude of effort, and scope within the last five years; and 2) offers the lowest price.

In addition to the past performance information received in response to this solicitation, the Government also reserves the right to seek past performance information through open market contacts, government systems, and other government agencies.

Options – The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the base year. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(End of Provision) Addenda to FAR 52.212-4 Contract Terms and Conditions—Commercial Items (Dec 2014)/Alt I (May 2014):

Paragraphs (a), (e), (i), (l), and (m) of the basic clause at FAR 52.212-4 are hereby deleted and replaced with paragraphs (a), (e), (i), (l), and (m) of FAR 52.212-4/Alt I.

(a) Inspection/Acceptance.

(1) The Government has the right to inspect and test all materials furnished and services performed under this contract, to the extent practicable at all places and times, including the period of performance, and in any event before acceptance. The Government may also inspect the plant or plants of the Contractor or any subcontractor engaged in contract performance. The Government will perform inspections and tests in a manner that will not unduly delay the work.

(2) If the Government performs inspection or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish and shall require subcontractors to furnish all reasonable facilities and assistance for the safe and convenient performance of these duties.

(3) Unless otherwise specified in the contract, the Government will accept or reject services and materials at the place of delivery as promptly as practicable after delivery, and they will be presumed accepted 60 days after the date of delivery, unless accepted earlier.

(4) At any time during contract performance, but not later than 6 months (or such other time as may be specified in the contract) after acceptance of the services or materials last delivered under this contract, the Government may require the Contractor to replace or correct services or materials that at time of delivery failed to meet contract requirements. Except as otherwise specified in paragraph (a)(6) of this clause, the cost of replacement or correction shall be determined under paragraph (i) of this clause, but the “hourly rate” for labor hours incurred in the replacement or correction shall be reduced to exclude that portion of the rate attributable to profit. Unless otherwise specified below, the portion of the “hourly rate” attributable to profit shall be 10 percent. The Contractor shall not tender for acceptance materials and services required to be replaced or corrected without disclosing the former requirement for replacement or correction, and, when required, shall disclose the corrective action taken. [Insert portion of labor rate attributable to profit.] (5)

(i) If the Contractor fails to proceed with reasonable promptness to perform required replacement or correction, and if the replacement or correction can be performed within the ceiling price (or the ceiling price as increased by the Government), the Government may—

(A) By contract or otherwise, perform the replacement or correction, charge to the Contractor any increased cost, or deduct such increased cost from any amounts paid or due under this contract; or

(B) Terminate this contract for cause.

(ii) Failure to agree to the amount of increased cost to be charged to the Contractor shall be a dispute under the Disputes clause of the contract.

(6) Notwithstanding paragraphs (a)(4) and (5) above, the Government may at any time require the Contractor to remedy by correction or replacement, without cost to the Government, any failure by the Contractor to comply with the requirements of this contract, if the failure is due to--

(i) Fraud, lack of good faith, or willful misconduct on the part of the Contractor’s managerial personnel; or

(ii) The conduct of one or more of the Contractor’s employees selected or retained by the Contractor after any of the Contractor’s managerial personnel has reasonable grounds to believe that the employee is habitually careless or unqualified.

(7) This clause applies in the same manner and to the same extent to corrected or replacement materials or services as to materials and services originally delivered under this contract.

(8) The Contractor has no obligation or liability under this contract to correct or replace materials and services that at time of delivery do not meet contract requirements, except as provided in this clause or as may be otherwise specified in the contract.

(9) Unless otherwise specified in the contract, the Contractor’s obligation to correct or replace Government-furnished property shall be governed by the clause pertaining to Government property.

(e) Definitions.

(1) The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. As used in this clause—

(i) Direct materials means those materials that enter directly into the end product, or that are used or consumed directly in connection with the furnishing of the end product or service.

(ii) Hourly rate means the rate(s) prescribed in the contract for payment for labor that meets the labor category qualifications of a labor category specified in the contract that are—

(A) Performed by the contractor;

(B) Performed by the subcontractors; or

(C) Transferred between divisions, subsidiaries, or affiliates of the contractor under a common control.

(iii) Materials means—

(A) Direct materials, including supplies transferred between divisions, subsidiaries, or affiliates of the contractor under a common control;

(B) Subcontracts for supplies and incidental services for which there is not a labor category specified in the contract;

(C) Other direct costs (e.g., incidental services for which there is not a labor category specified in the contract, travel, computer usage charges, etc.);

(D) The following subcontracts for services which are specifically excluded from the hourly rate: [Insert any subcontracts for services to be excluded from the hourly rates prescribed in the schedule.]; and

(E) Indirect costs specifically provided for in this clause.

(iv) Subcontract means any contract, as defined in FAR Subpart 2.1, entered into with a subcontractor to furnish supplies or services for performance of the prime contract or a subcontract including transfers between divisions, subsidiaries, or affiliates of a contractor or subcontractor. It includes, but is not limited to, purchase orders, and changes and modifications to purchase orders.

(i) Payments.

(1) Work performed. The Government will pay the Contractor as follows upon the submission of commercial invoices approved by the Contracting Officer:

(i) Hourly rate.

(A) The amounts shall be computed by multiplying the appropriate hourly rates prescribed in the contract by the number of direct labor hours performed. Fractional parts of an hour shall be payable on a prorated basis.

(B) The rates shall be paid for all labor performed on the contract that meets the labor qualifications specified in the contract. Labor hours incurred to perform tasks for which labor qualifications were specified in the contract will not be paid to the extent the work is performed by individuals that do not meet the qualifications specified in the contract, unless specifically authorized by the Contracting Officer.

(C) Invoices may be submitted once each month (or at more frequent intervals, if approved by the Contracting Officer) to the Contracting Officer or the authorized representative.

(D) When requested by the Contracting Officer or the authorized representative, the Contractor shall substantiate invoices (including any subcontractor hours reimbursed at the hourly rate in the schedule) by evidence of actual payment, individual daily job timecards, records that verify the employees meet the qualifications for the labor categories specified in the contract, or other substantiation specified in the contract.

(E) Unless the Schedule prescribes otherwise, the hourly rates in the Schedule shall not be varied by virtue of the Contractor having performed work on an overtime basis.

(1) If no overtime rates are provided in the Schedule and the Contracting Officer approves overtime work in advance, overtime rates shall be negotiated.

(2) Failure to agree upon these overtime rates shall be treated as a dispute under the Disputes clause of this contract.

(3) If the Schedule provided rates for overtime, the premium portion of those rates will be reimbursable only to the extent the overtime is approved by the Contracting Officer.

(ii) Materials.

(A) If the Contractor furnishes materials that meet the definition of a commercial item at FAR 2.101, the price to be paid for such materials shall not exceed the Contractor’s established catalog or market price, adjusted to reflect the--

(1) Quantities being acquired; and

(2) Any modifications necessary because of contract requirements.

(B) Except as provided for in paragraph (i)(1)(ii)(A) and (D)(2) of this clause, the Government will reimburse the Contractor the actual cost of materials (less any rebates, refunds, or discounts received by the contractor that are identifiable to the contract) provided the Contractor—

(1) Has made payments for materials in accordance with the terms and conditions of the agreement or invoice; or

(2) Makes these payments within 30 days of the submission of the Contractor’s payment request to the Government and such payment is in accordance with the terms and conditions of the agreement or invoice.

(C) To the extent able, the Contractor shall—

(1) Obtain materials at the most advantageous prices available with due regard to securing prompt delivery of satisfactory materials; and

(2) Give credit to the Government for cash and trade discounts, rebates, scrap, commissions, and other amounts that are identifiable to the contract.

(D) Other Costs. Unless listed below, other direct and indirect costs will not be reimbursed.

(1) Other direct Costs. The Government will reimburse the Contractor on the basis of actual cost for the following, provided such costs comply with the requirements in paragraph (i)(1)(ii)(B) of this clause: [Insert each element of other direct costs (e.g., travel, computer usage charges, etc. Insert “None” if no reimbursement for other direct costs will be provided. If this is an indefinite delivery contract, the Contracting Officer may insert “Each order must list separately the elements of other direct charge(s) for that order or, if no reimbursement for other direct costs will be provided, insert ‘None’.”]

(2) Indirect Costs (Material handling, Subcontract Administration, etc.). The Government will reimburse the Contractor for indirect costs on a pro-rata basis over the period of contract performance at the following fixed price: [Insert a fixed amount for the indirect costs and payment schedule. Insert “$0” if no fixed price reimbursement for indirect costs will be provided. (If this is an indefinite delivery contract, the Contracting Officer may insert “Each order must list separately the fixed amount for the indirect costs and payment schedule or, if no reimbursement for indirect costs, insert ‘None’.”]

(2) Total cost. It is estimated that the total cost to the Government for the performance of this contract shall not exceed the ceiling price set forth in the Schedule and the Contractor agrees to use its best efforts to perform the work specified in the Schedule and all obligations under this contract within such ceiling price. If at any time the Contractor has reason to believe that the hourly rate payments and material costs that will accrue in performing this contract in the next succeeding 30 days, if added to all other payments and costs previously accrued, will exceed 85 percent of the ceiling price in the Schedule, the Contractor shall notify the Contracting Officer giving a revised estimate of the total price to the Government for performing this contract with supporting reasons and documentation. If at any time during the performance of this contract, the Contractor has reason to believe that the total price to the Government for performing this contract will be substantially greater or less than the then stated ceiling price, the Contractor shall so notify the Contracting Officer, giving a revised estimate of the total price for performing this contract, with supporting reasons and documentation. If at any time during performance of this contract, the Government has reason to believe that the work to be required in performing this contract will be substantially greater or less than the stated ceiling price, the Contracting Officer will so advise the Contractor, giving the then revised estimate of the total amount of effort to be required under the contract.

(3) Ceiling price. The Government will not be obligated to pay the Contractor any amount in excess of the ceiling price in the Schedule, and the Contractor shall not be obligated to continue performance if to do so would exceed the ceiling price set forth in the Schedule, unless and until the Contracting Officer notifies the contractor in writing that the ceiling price has been increased and specifies in the notice a revised ceiling that shall constitute the ceiling price for performance under this contract. When and to the extent that the ceiling price set forth in the Schedule has been increased, any hours expended and material costs incurred by the Contractor in excess of the ceiling price before the increase shall be allowable to the same extent as if the hours expended and material costs had been incurred after the increase in the ceiling price.

(4) Access to records. At any time before final payment under this contract, the Contracting Officer (or authorized representative) will have access to the following (access shall be limited to the listing below unless otherwise agreed to by the Contractor and the Contracting Officer):

(i) Records that verify that the employees whose time has been included in any invoice met the qualifications for the labor categories specified in the contract.

(ii) For labor hours (including any subcontractor hours reimbursed at the hourly rate in the schedule), when timecards are required as substantiation for payment—

(A) The original timecards (paper-based or electronic);

(B) The Contractor’s timekeeping procedures;

(C) Contractor records that show the distribution of labor between jobs or contracts; and

(D) Employees whose time has been included in any invoice for the purpose of verifying that these employees have worked the hours shown on the invoices.

(iii) For material and subcontract costs that are reimbursed on the basis of actual cost—

(A) Any invoices or subcontract agreements substantiating material costs; and

(B) Any documents supporting payment of those invoices.

(5) Overpayments/Underpayments. Each payment previously made shall be subject to reduction to the extent of amounts, on preceding invoices, that are found by the Contracting Officer not to have been properly payable and shall also be subject to reduction for overpayments or to increase for underpayments. The Contractor shall promptly pay any such reduction within 30 days unless the parties agree otherwise. The Government within 30 days will pay any such increases, unless the parties agree otherwise. The Contractor’s payment will be made by check. If the Contractor becomes aware of a duplicate invoice payment or that the Government has otherwise overpaid on an invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected contract line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6)

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury, as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, and then at the rate applicable for each six month period as established by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final Decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt in a timely manner;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR 32.60702).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract.

(viii) Upon receipt and approval of the invoice designated by the Contractor as the “completion invoice” and supporting documentation, and upon compliance by the Contractor with all terms of this contract, any outstanding balances will be paid within 30 days unless the parties agree otherwise. The completion invoice, and supporting documentation, shall be submitted by the Contractor as promptly as practicable following completion of the work under this contract, but in no event later than 1 year (or such longer period as the Contracting Officer may approve in writing) from the date of completion.

(7) Release of claims. The Contractor, and each assignee under an assignment entered into under this contract and in effect at the time of final payment under this contract, shall execute and deliver, at the time of and as a condition precedent to final payment under this contract, a release discharging the Government, its officers, agents, and employees of and from all liabilities, obligations, and claims arising out of or under this contract, subject only to the following exceptions.

(i) Specified claims in stated amounts, or in estimated amounts if the amounts are not susceptible to exact statement by the Contractor.

(ii) Claims, together with reasonable incidental expenses, based upon the liabilities of the Contractor to third parties arising out of performing this contract, that are not known to the Contractor on the date of the execution of the release, and of which the Contractor gives notice in writing to the Contracting Officer not more than 6 years after the date of the release or the date of any notice to the Contractor that the Government is prepared to make final payment, whichever is earlier.

(iii) Claims for reimbursement of costs (other than expenses of the Contractor by reason of its indemnification of the Government against patent liability), including reasonable incidental expenses, incurred by the Contractor under the terms of this contract relating to patents.

(8) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C 3903) and prompt payment regulations at 5 CFR part 1315.

(9) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(10) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid an amount for direct labor hours (as defined in the Schedule of the contract) determined by multiplying the number of direct labor hours expended before the effective date of termination by the hourly rate(s) in the contract, less any hourly rate payments already made to the Contractor plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system that have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred that reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon written request, with adequate assurances of future performance. Subject to the terms of this contract, the Contractor shall be paid an amount computed under paragraph (i) Payments of this clause, but the “hourly rate” for labor hours expended in furnishing work not delivered to or accepted by the Government shall be reduced to exclude that portion of the rate attributable to profit. Unless otherwise specified in paragraph (a)(4) of this clause, the portion of the “hourly rate” attributable to profit shall be 10 percent. In the event of termination for cause, the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

The following clauses Incorporated by Reference:

FAR CLAUSE
TITLE
DATE
52.204-19
Incorporation by Reference of Representations and Certifications
Dec 2014
52.232-39
Unenforceability of Unauthorized Obligations
Jun 2013
52.233-4
Applicable Law for Breach of Contract Claim
Oct 2004
52.246-16
Responsibility for Supplies
Apr 1984
52.247-34
F.O.B. Destination
Nov 1991
DFARS CLAUSE
TITLE
DATE
252.203-7002
Requirement to Inform Employees of Whistleblower Rights
Sep 2013
252.204-7003
Control of Government Personnel Work Product
Apr 1992
252.225-7048
Export Controlled Items
Jun 2013
252.243-7001
Pricing of Contract Modifications
Dec 1991
DLAD CLAUSE
TITLE
DATE
52.211-9010
Shipping Label Requirements – Military Standard (MIL-STD) 129P
Apr 2014
Alt I
Aug 2005
52.211-9014
Contractor Retention of Traceability Documentation
Aug 2012
52.232-9010
Accelerated Payments to Small Business
Apr 2014
52.247-9034
Point of Contact for Transportation Instructions
Jun 2013

Clauses Incorporated by Full Text:

FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.dla.mil/j-3/j-336/icps.htm . (This page can also be reached by accessing the J-71 Web page at http://www.dla.mil/j-3/j-336/logisticspolicy/procurementlinks2.htm and selecting “Go to FAR/DFARS & Local Clauses.”

http://www.dla.mil/Acquisition http://farsite.hill.af.mil/ (End of Clause) FAR 52.217-9 Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days of the expiration of this contract; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 36 months.

(End of Clause) FAR 52.217-8 Option to Extend Services (Nov 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days of the expiration of this contact.

(End of Clause) DFARS 252.201-7000 Contracting Officer’s Representative (Dec 1991)

(a) Definition. “Contracting officer's representative” means an individual designated in accordance with subsection 201.602-2 of the Defense Federal Acquisition Regulation Supplement and authorized in writing by the contracting officer to perform specific technical or administrative functions.

(b) If the Contracting Officer designates a contracting officer's representative (COR), the Contractor will receive a copy of the written designation. It will specify the extent of the COR's authority to act on behalf of the contracting officer. The COR is not authorized to make any commitments or changes that will affect price, quality, quantity, delivery, or any other term or condition of the contract.

(End of clause) DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions (May 2013)

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

_____________2-in-1 Invoice______________________________________________

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

______________N/A______________________________________________

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF
Data to be entered in WAWF
Pay Official DoDAAC
SL4701
Issue By DoDAAC
SP3300
Admin DoDAAC
SP3300
Inspect By DoDAAC
N/A

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)
SB3103

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Shane Crusey
shane.crusey@dla.mil
Edward Erney
edward.erney@dla.mil

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

N/A

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause) DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) (FEB 2007)

(a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract. and/or when WPM is being acquired under this contract.”

(b) Definition.

Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD).

(c) All wood packaging material (WPM) used to make shipments under Department of Defense (DOD) contracts and/or acquired by DOD must meet requirements of international standards for phytosanitary measures (ISPM) 15, “Guidelines for Regulating Wood Packaging Materials in International Trade.” DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo.

(1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) wood packaging material program and WPM enforcement regulations (see http://www.alsc.org/).

(2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved dunnage stamp.

(d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

(End of Clause) Illegal Items not Authorized on Federal Installation Illegal drugs, guns or other contraband are not authorized on this Federal installation. It is the Contractor's responsibility to ensure that its employees working on-site at this installation are U. S. citizens or legal aliens with no outstanding warrants. This installation is manned by a DoD Police Force who possesses apprehension authority, which includes holding suspects for local authorities. The local authorities can issue a citation that charges the individual with a specific offense and requires the individual to appear before a Federal Magistrate. This agency processes illegal aliens in accordance with INS instructions.

(End of Text) Mark Contract Number on all Correspondence Contractor must mark the contract or purchase order number on all paperwork and shipments. The order number must appear on the exterior of the shipment. Failure to follow these instructions will hold up payment to you and could result in the return of merchandise at your expense.

(End of Text) 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Apr 2015)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] _X__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

_X__ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

_X__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

_X__ (10) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (May 2012) (section 738 of Division C of Public Law 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161).

___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved] _X__ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

_X__ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2014) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Oct 2001) of 52.219-9.

__…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .