Attachment_3_-_Maintenance_Task_List 1 .docx
DOCX document 30 KB Posted
- Solicitation number
- SP330015Q0005
- Issued by
-
Defense Logistics Agency Distribution
About this file
Attachment 3 - Maintenance Task List
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_1_SOW 1 .doc | DOC document | |
| Attachment__7_-_Price_Breakdown_of_CLINs_X001.xlsx | XLSX spreadsheet | |
| Attachment_6_Wage_Determination.pdf | ||
| Combined_Synopsis_and_Solicitation_SP3300-15-Q-0005.docx | DOCX document | |
| Attachment_2_-_DLA_Dist_Tobyhanna _PA_Equip_Invent_List(1).xlsx | XLSX spreadsheet | |
| Attachment_4_-_Sample_Work_Order 1 .pdf | ||
| Attachment_5_-_Vehicle_Technical_Inspection_DLA_Form_1730 1 .pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 3 of SP330015Q0005 Maintenance Task Lists
MAINTENANCE TASK LIST #1
TYPE EQUIPMENT: Stock Selectors, Waves, Turret Truck, Electric and Wire-Guided 2,000-6,000 lbs CAP
| TASK |
| FREQUENCY |
| NOTES |
| SEMI-ANNUAL |
| ANNUAL |
| 1. Lubricate all points |
| X |
| 2. Wheel Bearings |
| X |
| X |
| 2 |
3. Hydraulic Oil Filters
| X |
| 6 |
| 4. All Fluids |
| X |
| X |
| 3 |
| 5. Motor Drive |
| X |
| X |
| 1 |
| 6. Battery, Clean & Service |
| X |
| X |
| 8 |
| 7. Hoist and Carriage Chains |
| X |
| X |
| 4 |
| 8. Safety Inspection |
| X |
| X |
| 5 |
9. Load Certification
| X |
| 7 |
Notes:
1. Check
2. Inspect, re-pack, clean and adjust as necessary. Replacement of wheel bearings shall be accomplished under remedial maintenance, as agreed to by the COR.
3. Check fluid levels in gear boxes, hydraulics, transmissions, differential and brakes.
Top off semi-annually; change annually
4. Lubricate, inspect, check tension.
5. Inspect all safety components to include front and rear lights, brakes, brake pedals, tires horn, back-up alarm, overhead guard and fire extinguisher. All repairs required as a result of Safety Inspection shall be accomplished under Remedial Maintenance, with the approval of the COR.
6. Replaceable filters checked semi-annually, change annually; Reusable screen filters clean semi-annually and annually.
7. In accordance with Code of Federal Regulation (CFR) 29, Part 1910; stencil Capacity when required.
8. Inspect, maintain; check/fill battery water level; inspect cables and connections for damage.
MAINTENANCE TASK LIST #2
TYPE EQUIPMENT: FORKLIFT, ELECTRIC-(ALL), PALLET JACK
| TASK |
| FREQUENCY |
| NOTES |
| SEMI-ANNUAL |
| ANNUAL |
| 1. Lube Chassis |
| X |
2. Wheel Bearings
| X |
| 1 |
| 3. Check Motor Brushes (Drive) |
| X |
| X |
| 4. Check Contact Points |
| X |
| X |
| 2 |
| 5. Hydraulic System & Filter |
| X |
| X |
| 3 |
| 6. Electric Motor |
| X |
| X |
| 2 |
| 7. Lights & Lenses |
| X |
| X |
| 4 |
| 8. Brakes |
| X |
| X |
| 5 |
| 9. Safety Inspection |
| X |
| X |
| 4 |
10. Load Test
| X |
| 4 |
| 11. Operational Check |
| X |
| X |
| 6 |
| 12. Battery |
| X |
| X |
| 7 |
| 13. Lift Chains |
| X |
| X |
| 4 & 6 |
Notes:
1. Inspect and repack; replace seals/gaskets.
2. Inspect for burned, pitted or damage; Replace if defective. Clean and check electric motor.
3. Inspect lines/hoses for damage or leaks; Clean/Replace filter annually; Change hydraulic oil if contaminated; Top off reservoir.
4. Load test in accordance with DFR 29, part 1910.
5. Check for wear; Check for proper operation; Inspect for damaged, worn or broken parts; replace necessary seals and gaskets.
6. Inspect all safety related components & repair damaged; Check & repair lights/lenses; Check brakes and brake pedal; check emergency brake; check fire extinguisher, perform operational run for proper operation of all systems. All repairs required by virtue of a safety inspection, shall be accomplished under Remedial Maintenance.
7. Top off electrolyte levels; Check cables/connectors for damage; clean off exterior of batteries and remove all acid build-up.
File details come from the government source that posted it. Updated .