Attachment 3 - Maintenance Task Charts.pdf

MAINTENANCE TASK LIST #1

TYPE EQUIPMENT: STOCK SELECTORS, TURRET TRUCK,

ELECTRIC, WIRE GUIDED 1,000-3,000 LBS, CAP

TASK SEMI-

ANNUAL ANNUAL

NOTES

1. Lubricate all points X N/A

2. Wheel Bearings X X 2

3. Hydraulic oil filters N/A X 6

4. All fluids X X 3

5. Motor brushes X X 1

6. Contractor points X X 1

7. Battery, clean and service X X 8

8. Hoist and carriage chains X X 4

9. Safety Inspection X X 5

10. Load Certification N/A X 7

Notes:

1. Check, change, replace or repair as necessary

2. Inspect, re-pack, clean and adjust as necessary. Replacement of wheel bearings shall be accomplished under remedial maintenance, as agreed to by the COR.

3. Check fluid levels in gear boxes, hydraulics, transmissions, differential and brakes. Top off semi-annually; change annually.

4. Lubricate, inspect, check tension.

5. Inspect all safety components to include front and rear lights, brakes, brake pedals, tires, horn, back-up alarm, overhead guard and fire extinguisher. All repairs required as a result of Safety Inspection shall be accomplished under Remedial Maintenance, with the approval of the

COR.

6. Replaceable filters checked semi-annually, change annually; Reusable screen filters, clean semi-annually and annually.

7. In accordance with Code of Federal Regulation (CFR) 29, Part 1910;

stencil capacity when required.

8. Inspect, maintain; check/fill battery water level; inspect cables and connections for damage.

FREQUENCY

yre4020 Typewritten Text yre4020 Typewritten Text Attachment 3 yre4020 Typewritten Text

Slide Number 1