SP3300-26-Q-0059.pdf

INTRODUCTION:

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with FAR Part 12 for warehouse trailers for DLA Distribution Barstow, California.

This announcement constitutes the only solicitation. Quotes are being requested and a separate written solicitation will not be issued.

POINT OF CONTACT:

Acquisition Specialist Name: John Sproul Acquisition Specialist Email Address: John.Sproul@dla.mil Acquisition Specialist Phone Number: 614-693-5706 KO Name: Erik J. Smith KO Address: 5430 Mifflin Avenue, New Cumberland, PA 17070 KO Email Address: erik.smith@dla.mil KO Phone Number: 614-693-3137

SECTION ONE: NOTICE TO QUOTERS

1. Solicitation number SP330026Q0059 is issued as a Request for Quotation (RFQ), to provide warehouse trailers for DLA Distribution Barstow, California.

2. This acquisition is being solicited as a 100% small business set-aside. The NAICS code is

333924 and the size standard is 900 employees. The Product or Service Code for this acquisition is 3920.

3. Closing date and time for quotes: 1:00PM EST on March 2, 2026

4. Closing date and time for questions: 1:00PM EST on February 26, 2026

5. As a result of this solicitation, one (1) firm-fixed-price purchase order will be issued.

SECTION TWO: SCHEDULE OF SUPPLIES AND SERVICES

CLIN Description Unit of Issue

Quantity Unit Price Total Price

0001 Warehouse Trailers, See attached specs. PSC: 3920/MN: N00006129 EA 9 $ $

Total $

1. FOB Destination shipping shall be included in the unit price.

2. Quoters shall quote Firm-Fixed Unit Prices for all CLINs.

3. Manufacturer or Distributor Designation:

The quoter is the Manufacturer OR Distributor of this product (check one):

Manufacturer Distributor

If a Distributor, the quoter is quoting a product made by the following manufacturer:

If a Distributor, quoter is free to set their own pricing: _______YES or _______NO

SECTION 3: DESCRIPTION/PWS

CLIN Government Salient Characteristics

0001 Warehouse Trailers, (9) EA , See attached specifications

SECTION 4: PACKAGING

There are no special packaging requirements for this requirement

SECTION 5: INSPECTION/ACCEPTANCE

Proof Of Delivery: Acceptable Proof of Delivery documents include: Shipping

Documentation; Materials Inspection and Receiving Report (DD250), Bill of Lading, Packing List, Tracking/Delivery Confirmation or Invoice. To ensure prompt payment to your company, the Proof of Deliveries must include the following:

• CONTRACT NUMBER or ORIGINAL DOCUMENT NUMBER

• DELIVERY ORDER NUMBER (as applicable)

• CLIN /MATERIAL NUMBER

• SPECIFIC QUANTITY SHIPPED IN REFERENCE TO QUANTITY ORDERED

• PRINTED NAME AND WRITTEN SIGNATURE OF A GOVERNMENT EMPLOYEE

SECTION 6: DELIVERY/PERIOD OF PERFORMANCE/ORDERING PERIOD

1. Delivery Destination:

DLA Distribution Barstow BOSS Central Receiving-Warehouse 7 Bay 1 Barstow, CA 92311-5014

2. Delivery Schedule: Requested delivery lead time is 180 days After Recipt of Order. If you are unable to meet this delivery lead, time please provide your best possible delivery lead time in days:

3. Please ensure that the time frame you enter for delivery is realistic and achievable. Requests for delivery date extensions may only be granted with an economic consideration for the Government.

4. FOB: Destination

SECTION 7: CONTRACT ADMINISTRATION DATA

Invoicing And Payment: Invoicing and Payment will be made via Wide Area Work Flow.

See DFARS Clause 252.232-7006.

SECTION 8: SPECIAL CONTRACT REQUIREMENTS

1. Mark Contract Number on all Correspondence: Contractor must mark the contract or purchase order number on all paperwork and shipments. The order number must appear on the exterior of the shipment. Failure to follow these instructions will hold up payment to you and could result in the return of merchandise at your expense.

2. Requirements for Pallets: Material must be shipped on serviceable, winged pallets in accordance with MD00100452, Revision C, dated 09/2016. Please reference the following link for more information:

https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packagin g/Palletization.aspx

The complete specification for winged pallets can be found in Part 9 of ANSI MH1. The pallet must be heat treated, certified, and stamped or branded with the appropriate certification markings in accordance with DOD Manual 4140.65-M.

Please reference the DLA Master List of Technical and Quality Requirements for information at this link:

https://www.dla.mil/HQ/Acquisition/Offers/DLAD/TechnicalandQualityMLofRequirements/

Additional information can be found at:

https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packagin g/WoodPack.aspx

Failure to deliver supplies on pallets with these specifications will result in the Government not accepting the shipment when it arrives at destination. The quoter must quote shipment of supplies in accordance with this requirement.

3. Organizational Conflict Of Interest: The contractor shall be ineligible from participation as a contractor, subcontractor, or consultant in any procurement arising or resulting from any of the services provided to DLA on this contract. This restriction includes providing services to https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Palletization.aspx https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Palletization.aspx https://www.dla.mil/HQ/Acquisition/Offers/DLAD/TechnicalandQualityMLofRequirements/ https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/WoodPack.aspx https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/WoodPack.aspx any potential bidders on such procurements. The contractor shall not incorporate its product or services in any Performance Work Statement or specification unless directed to do so in writing by the Contracting Officer.

If the contractor, in the performance of this contract, obtains access to information such as plans, policies, reports, studies, financial data, internal data, or any other non-public information or information by the Privacy Act, the contractor agrees not to release such information without prior written approval from the Contracting Officer. The use of such information for personal gain is prohibited.

In addition, the contractor agrees that to the extent it receives or is given access to proprietary data, or other confidential or privileged technical, business, or financial information under this contract, it shall treat such information in accordance with any restrictions imposed on such information.

SECTION 9: CLAUSES

Addenda to FAR 52.212-4 Terms and Conditions—Commercial Products and Commercial Services (NOV 2025)

FAR 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.204-13 System for Award Management—Maintenance

FAR 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment

FAR 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations FAR 52.219-6 Notice of Total Small Business Set-Aside FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor—Cooperation with Authorities and Remedies FAR 52.222-36 Equal Opportunity for Workers with Disabilities FAR 52.222-50 Combating Trafficking in Persons FAR 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving FAR 52.232-1 Payments FAR 52.232-8 Discounts for Prompt Payment FAR 52.232-11 Extras FAR 52.232-23 Assignment of Claims FAR 52.232-33 Payment by Electronic Funds Transfer—System for Award Management FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors FAR 52.233-3 Protest After Award FAR 52.233-4 Applicable Law for Breach of Contract Claim FAR 52.240-91 Security Prohibitions and Exclusions FAR 52.247-34 F.o.b Destination

DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights DFARS 252.223-7008 Prohibition of Hexavalent Chromium DFARS 252.225-7001 Buy American and Balance of Payments Program DFARS 252.225-7012 Preference for Certain Domestic Commodities DFARS 252.225-7036 Buy American—Free Trade Agreements—Balance of Payments Program DFARS 252.225-7048 Export-Controlled Items DFARS 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

DFARS 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region

DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7010 Levies on Contract Payments DFARS 252.243-7001 Pricing of Contract Modifications DFARS 252.244-7000 Subcontracts for Commercial Products and Commercial Services DFARS 252.247-7023 Transportation of Supplies by Sea

FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998)

This notice incorporates provisions and clauses in effect under:

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

The complete text of any of the clauses and provisions are available electronically from the following sites:

FAR-https://www.acquisition.gov/far-overhaul

DFARS-https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html

DLAD-https://www.dla.mil/HQ/Acquisition/Policy-and-Directives/

(End of Clause)

DFARS 252.211-7003 Item Unique Identification and Valuation (JAN 2023)

(a) Definitions. As used in this clause— “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or https://www.acquisition.gov/far-overhaul https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html https://www.dla.mil/HQ/Acquisition/Policy-and-Directives/

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number.

For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

0001, Warehouse Trailers, 9 each________________________________________

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description (If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed repairables and DoD serially managed nonrepairables as specified in Attachment Number ____.

https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle

Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of Clause)

DFARS 252.232-7006 Wide Area Workflow Payment Instructions (JAN 2023)

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award

Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-

Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

https://www.acquisition.gov/dfars/part-252-solicitation-provisions-and-contract-clauses#DFARS_252.232-7003 http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm#252.232-7003 http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm#252.232-7003 https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

____Invoice_____ (Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

_______Not Applicable_________ (Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213- 1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF -- Data to be entered in WAWF Pay Official DoDAAC -- SL4701 Issue By DoDAAC -- SP3300 Admin DoDAAC** -- SP3300 Inspect By DoDAAC -- N/A Ship To Code – SB3208 Ship From Code -- N/A Mark For Code -- N/A Service Approver (DoDAAC) -- N/A Service Acceptor (DoDAAC) – N/A Accept at Other DoDAAC -- N/A LPO DoDAAC -- N/A DCAA Auditor DoDAAC -- N/A

Other DoDAAC(s) -- N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact. John.Sproul@dla.mil.

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of Clause)

DLAD PROCUREMENT NOTES:

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)

(1) By submitting a quotation or offer, the contractor, if it is not the manufacturer of the item, is confirming it currently has, or will obtain before delivery, and shall retain documented evidence (supply chain traceability documentation), as described in paragraph (2) of this procurement note, demonstrating the item is from the approved manufacturer and conforms to the technical requirements.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source's Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, if available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) website mailto:John.Sproul@dla.mil

(http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance- Program/).

(4) The contractor shall immediately make documentation available to the contracting officer upon request. The contracting officer determines the acceptability and sufficiency of documentation.

The contractor shall retain supply chain traceability documentation for six years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

(End of Procurement Note)

C14 Correction of Nonconforming Packaging or Marking (MAY 2020)

(1) The Government may correct nonconforming packaging or marking for receipts of DLA-owned materiel if the estimated costs of correction are $1,000 or less. The contracting officer will advise the contractor of the discrepancy and that the Government has corrected the packaging or marking. The contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government’s costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

(2) If the estimated costs of correction for receipts of DLA-owned materiel are more than $1,000, the contracting officer will advise the contractor of the discrepancy and have the materiel returned to the contractor for correction/resubmittal; or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor’s expense. If the Government remediates the discrepancy, the contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government’s costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

(End of Procurement Note)

L06 Agency Protests (DEC 2016)

Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer.

Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

(End of Procurement Note)

SECTION 10: DOCUMENTS, EXHIBITS, AND ATTACHMENTS

Attachment 1-Specifications

SECTION 11: REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS

OF QUOTERS OR OFFERORS

Not Applicable

SECTION 12: PROVISIONS

FAR 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation

FAR 52.204-7 System for Award Management—Registration FAR 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations—Representation

FAR 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law

FAR 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products FAR 52.240-90 Security Prohibitions and Exclusions Representations and Certifications

DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials DFARS 252.204-7024 Notice on the Use of the Supplier Performance Risk System DFARS 252.225-7000 Buy American—Balance of Payments Program Certificate

DFARS 252.225-7035 Buy American—Free Trade Agreements—Balance of Payments Program Certificate

DFARS 252.225-7055 Representation Regarding Business Operations with the Maduro Regime

DFARS 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region—Representation

FAR 52.216-1 Type of Contract (APR 1984)

The Government contemplates award of a single Firm Fixed Price purchase order resulting from this solicitation.

(End of Provision)

FAR 52.233-2 Service of Protest (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer by obtaining written and dated acknowledgment of receipt from DLA Distribution J7 Acquisition Operations, Attn.

Erik Smith, Contracting Officer, 5430 Mifflin Ave, New Cumberland, PA 17070-5008.

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

FAR 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

FAR – https://www.acquisition.gov/far/part-52 DFARS – https://www.acquisition.gov/dfars/part-252-solicitation-provisions-and-contract-clauses DLAD – https://www.acquisition.gov/dlad/part-52-%E2%80%93-solicitation-provisions-and-contract-clauses

DLAD 5452.233-9001 Disputes – Agreement to Use Alternative Dispute Resolution (ADR)

(JUN 2020)

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1), or, for the Agency, by the contracting officer, and approved at a level above the contracting officer after consultation with the ADR Specialist and legal counsel. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the contracting officer before determining ADR to be inappropriate.

(c) If you wish to opt out of this clause, check here [ ]. Alternate wording may be negotiated with the contracting officer.

SECTION 13: INSTRUCTIONS TO QUOTERS

Far 52.212-1 Instructions to Offerors – Commercial Products and Commercial Services

(DEVIATION) (CD 2026-O00028)

ADDENDA TO FAR 52.212-1 Instructions to Offerors – Commercial Products and Commercial Services (DEVIATION) (CD 2026-O00028)

Reference paragraph (c) under referenced provision FAR 52.212-1. This paragraph is tailored to read as follows:

(c) Period of acceptance of quotes. The quoter agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of quotes.

GENERAL

1. All quotes must be received electronically via email at: John.Sproul@dla.mil, Subject:

SP3300-26-Q-0059 Quotation – “Quoter’s Company Name.” Quotations must be received by 1:00 PM Eastern Standard Time on March 2, 2026 to be considered for award.

2. Facsimile and hard copy quote submissions will not be accepted or evaluated.

3. Quotes shall be prepared in the English language.

4. Quotes shall include all required documentation as listed below. The submission of a quote that does not contain all items requested below may result in elimination from consideration for award. The instructions contained herein are to serve as a guide in preparation of quotes;

however, they are not intended to be all inclusive. The instructions generally describe the type and extent of information which should be provided in the quote. The quoter is expected to completely examine and analyze all aspects of the technical, past performance, and price areas to be addressed, and to include information in the quote which will enable the evaluators to determine the quoter’s understanding of the requirements in each of the above areas.

5. Quotes must have the Controlled Unclassified Information (CUI) incorporated markings appropriate pages on each quote file.

(a) Excel Schedule of Supplies – Template includes header and footer with blank controlled block to be filled in by quoter.

(b) All other documents marked with appropriate CUI markings as follows:

- Header on all pages: 1st Line of Header: “CUI”

- 1st page only, bottom right corner (above footer):

Controlled by: Quoter’s Name CUI Category: SSEL Distribution/Dissemination Controls: FED ONLY POC: To be completed by Quoter

- Footer (at very bottom) on all pages stating “CUI”

6. Quotes must include the following items:

1. TECHNICAL CAPABILITY

1. Technical Capability Quotations may be submitted in contractor format and shall include:

a. Manufacturer Name and Address

b. Manufacturer Part Number

2. The quoter must include descriptive literature or other documentation from the manufacturer which demonstrates the quoter’s product meets the requirements of the material descriptions of the required supplies (See Section Three: Description/PWS).

mailto:John.Sproul@dla.mil

2. PAST PERFORMANCE

The quoter shall provide information on its past performance record. If the quoter has no recent, relevant history in the Contractor Performance Assessment Reporting System (CPARS) application, Electronic Subcontract Reporting System (eSRS), or other databases, the quoter may submit up to three (3) recent (within three years), relevant (similar in scope, magnitude and complexity as outlined in the PWS) references to be evaluated. The references may be government or commercial contracts/projects and should include a point of contact, contract number, dollar value, and project information. If a quoter has no recent/relevant past performance, they shall provide the following statement in lieu of the information requested: “(Insert quoter name) has determined they possess no recent, relevant past performance in accordance with the RFQ.”

3. PRICING AND ADMINISTRATIVE

a. The Price Quote shall be submitted in accordance with the Schedule of Supplies CLIN structure contained in Section Two: Schedule of Supplies and Services of the solicitation. The quoter shall provide a unit price and amount for the CLIN. Prices shall be rounded to the second decimal place.

b. Representations and Certifications: Quoter’s are required to include a completed copy of the FAR provision 52.212-3 Offeror Representations and Certifications- Commercial Products and Commercial Services (DEVIATION) (CD 2025-O0003) (MAR 2025) with its quote or may indicate completion of the representations and certifications on the internet at http://www.sam.gov. Quoters are required to include a completed copy of FAR provision 52.219-1 Small Business Program Representations with their quote submission if not in SAM Representations and Certifications. Failure to include the certifications along with the quotation or to complete the certifications on the internet may result in elimination from consideration for award.

c. Company Name, Address, Point of Contact, Telephone number, and E-mail address.

d. Quoter’s SAM Unique Entity ID and Commercial and Government Entity (CAGE)

Code

e. Solicitation Number

f. Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation)

g. If quoter is quoting as a distributor/reseller provide a completed copy of the following statement:

"___________________________________ (Company Name) is an authorized distributor/reseller for_________________________________ (Manufacturer Name) products and is free to set our own prices and discounts."

7. Organization: The quoter shall prepare the quote as set forth in the table below. The titles and contents for each file are defined in this table. Quotes shall be submitted as THREE (3) separate files as follow:

File Title Page Limitations

I Technical Capability None II Past Performance None III Pricing & Administrative None

SECTION 14: EVALUATION

Addenda to FAR 52.212-2 Evaluation - Commercial Products and Commercial Services

(DEVIATION) (CD 2026-O00028)

(a) Evaluation Factors

1. The Government intends to award one (1) contract to the acceptable quoter with the lowest evaluated price which is deemed responsible in accordance with the FAR, and which has submitted a quote conforming to the solicitation requirements. The requirements include all stated terms, conditions, and all other requirements of this solicitation. The Government intends to make an award based on the initial quotes received; therefore, the initial quote should contain the quoter’s best terms from a price and technical standpoint. Quoters must be determined to be responsible according to the standards of FAR Subpart 9 to be eligible for award.

2. Failure to provide a complete, detailed, realistic, and reasonable quote may reflect a lack of understanding of the requirements and may result in a determination that the quoter’s quote is unacceptable. The Government does not assume a duty to search for clarification data to cure problems or inconsistencies with a quoter’s quote.

3. The award decision process is being conducted under FAR Part 12, wherein the Contracting Officer is permitted to engage in communications with individual contractors about their quotes without being subject to the policies and procedures of FAR Part 15, and without engaging in "discussions" or "negotiations" under FAR Part 15.

4. Although the Government intends to award a Purchase Order resulting from this solicitation, the Government reserves the right to reject any and all quotes received and not award any item or items from this solicitation.

5. Technical Capability and Past Performance will be evaluated on an acceptable or unacceptable basis.

TECHNICAL CAPABILITY

The Government will evaluate the vendors Technical Capability to determine acceptability of the quote in response to this solicitation.

To be considered technically acceptable:

• The Quoter’s supplies must meet the salient physical, functional, or performance specifications specified in this solicitation.

PAST PERFORMANCE

To be considered acceptable:

1. The quoter will be evaluated on their past performance record and any other relevant information obtained from available sources which may include CPARS, eSRS, Responsibility/Qualification reports in SAM, other databases, as well as interviews with POC references, Program Managers/Customers, Contracting Officers, or Contracting Officer Representatives (CORs), data submitted by the Quoter as part of the Past Performance file, and any other information available to determine the quality and relevance of the quoter’s past performance.

2. The Government shall determine how well the quoter performed on the recent (within 3 years of solicitation issuance) and relevant (similar in scope, magnitude, complexity) contracts. The Government will assign an acceptable/unacceptable rating as to the quoter’s ability to perform on the required effort based upon the recent and relevant past performance record considering the information available regarding quality of performance.

3. In the case of a quoter without a record or references of recent and relevant past performance, or for whom information on past performance is not available, or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance (see FAR 15.305(a)(2)(iv), Past Performance Evaluation).

Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, “unknown” shall be considered “acceptable.”

4. Should the Government discover adverse past performance information to which the quoter had not had a prior opportunity to respond, the Contracting Officer will conduct communications if deemed appropriate.

PRICE AND ADMINISTRATIVE

1. If a quote has been determined acceptable under each of the non-price factors listed above, the

Government will then evaluate the quote for the lowest price. The quoted total price between quoters determined to be technically acceptable will be the determining factor in the selection of a quote for award. Price analysis shall not be conducted on quoters determined to be unacceptable for award, since the quoter will not be in line for award as the lowest priced technically acceptable quoter. All CLINs must be priced.

2. The Government will perform a price analysis to determine the reasonableness of proposed price in accordance with the FAR 15.404-1(b). The Government will utilize a comparison of proposed prices received in response to the solicitation.

(b) Notice of award. A written notice of award or acceptance of an offer furnished to the successful

Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

****************************END OF THE SOLICITATION**************************

DFARS 252.211-7003 Item Unique Identification and Valuation (JAN 2023)