SP3300-24-Q-0218.doc

SP3300-24-Q-0218

NOTICE TO QUOTERS

1.

Issuing Office:

DLA Distribution Acquisition Operations (J7)

5430 Mifflin Avenue

New Cumberland, PA 17070-5008

2. This is a Request for Quote (RFQ) issued as a combined synopsis/solicitation (CSS) for commercial items prepared in accordance with the format in the Federal Acquisition Regulations (FAR) Subpart 12.6 – Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice, and in conjunction with FAR Subpart 13.5 – Simplified Procedures for Certain Commercial Products and Commercial Services. This announcement constitutes the only CSS. Quotes are being requested and a written CSS will not be issued. The RFQ number is SP3300-24-Q-0218.

3. This notice incorporates provisions and clauses in effect under:

The complete text of any of the clauses and provisions are available electronically from the following sites:

FAR - https://www.ecfr.gov/current/title-48/chapter-1 DFARS - https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ DLAD - https://www.dla.mil/HQ/Acquisition/Policy-and-Directives/

4. This CSS is being issued to establish one (1) Fixed-Price Indefinite Delivery Indefinite Quantity contract with Firm Fixed Price Delivery Orders for Epoxy, Adhesive, Sealant, and Bonding Materials for DLA Distribution Hill, Utah, as described in Attachment 1 – Schedule of Supplies. Any award resulting from this CSS will be issued on a Standard Form (SF) 1449. This acquisition is not a Defense Priorities and Allocations System rated procurement.

5. ELECTRONIC SOLICITATION: This CSS, including all attachments, and any amendments, is only available electronically at the website www.sam.gov. Quoters are cautioned it is their responsibility to access the website for any amendments that may be issued under the CSS. There will be no advance notification of amendment issuance. Quoters are advised to frequently check the website for any amendments since an amendment may be issued up until the quote submission due date and time. Failure to acknowledge amendments may render your quote non-responsive and ineligible for award.

6. Brand Name or Equal Requirement. In accordance with FAR Provision 52.211-6, the following table contains items that have been identified as “brand name or equal.” Interested quoters must provide a quote for the brand name items in the table or substitute another item that is equal in its salient physical, functional, or performance characteristics.

For CLINs X001 – X007 an item description, manufacturer’s part number and/or a National Stock Number has been provided. Quoters can provide the stated brand name item or an equal item.

For CLINs X008 and X009 a description has been provided as well as several brand name items with manufacturer’s part number and/or National Stock Number. Quoters can provide one of the brand name items.

Part Number Flamemaster CS 3204 Class B-2. NSN 8030-00-753-5006

Part Number: Flamemaster CS 3204 Class B-2. NSN 8030-00-753-5005

Part Number: Flamemaster CS 3204 Class A-2. NSN 8030-00-753-5004

1) H.B. Fuller FE-6026 A/B (NSN 8040-00-900-6296)

2) Henkel Loctite A1177 A/B (NSN 8040-00-157-8677)

3) H.B. Fuller EY-2562 A/B

1) H.B. Fuller FE-6026 A/B (NSN 8040-00-900-6296)

2) Henkel Loctite A1177 A/B (NSN 8040-00-157-8677)

3) H.B. Fuller EY-2562 A/B

7. This CSS is being solicited as a 100% Small Business Set-Aside. The North American Industry Classification System code for this acquisition is 325520 and the size standard is 550 employees. The Product Service Code for this acquisition is 8040. A waiver to the nonmanufacturer rule does exist for NAICSS 325520;

therefore, a small business concern may quote a large businesses product (reference clause FAR 52.219-6 Notice of Total Small Business Set-Aside). All other terms and conditions remain unchanged.

8. DELIVERY ORDERS: This contract is only for use by DLA Distribution. All delivery orders will be issued via email by any DLA Distribution Contracting Officer or Ordering Officer. Delivery orders will be issued on a Firm-Fixed-Price basis.

9.

THE ORDERING PERIODS SHALL BE:

Ordering Period One: December 1, 2024 through November 30, 2025

Ordering Period Two: December 1, 2025 through November 30, 2026

Ordering Period Three: December 1, 2026 through November 30, 2027 Ordering Period Four: December 1, 2027 through November 30, 2028

Ordering Period Five: December 1, 2028 through November 30, 2029 10.

DELIVERY INFORMATION:

DoDAAC: SM3400 DLA Distribution Hill, Utah ATTN: Tool & Parts Crib 6149 Wardleigh Road, Bldg 1160

Hill AFB, UT 84056-5840 FOB point shall be Destination. The Government desires delivery of the item(s) identified on the purchase order within 30 calendar days after receipt of the delivery order.

11. ESTIMATED QUANTITIES: The quantities shown in the Schedule of Supplies are estimated only. They represent the Government’s best-known estimate for each line item. Payment will only be for the actual quantities provided to the Government at the price specified. If the Government requirements do not result in the quantities estimated; such event shall not constitute the basis for an equitable price adjustment under the contract.

12. GUARANTEED MINIMUM AND MAXIMUM QUANTITIES: The guaranteed minimum value is $21,791.00 for the five (5) year ordering period. The maximum value of the contract is not to exceed $997,063.82.

13. ECONOMIC PRICE ADJUSTMENT (EPA): Reference is made to DLAD Procurement Note C13 contained within the Clause section of this solicitation to highlight that there is a maximum of 10% aggregate over the life of the contract for each unit price. Additionally, only the portion of the unit price that can be associated with the raw material/index material will be applied for any price adjustment. As a result, vendors should ensure they submit the pricing portion of their quote accordingly.

14.

PROOF OF DELIVERY: Acceptable Proof of Delivery documents include: Shipping Documentation; Materials Inspection and Receiving Report (DD250); Bill of Lading; Packing List; Tracking/Delivery Confirmation; or Invoice. To ensure prompt payment to your company, the Proof of Deliveries must include the following:

· CONTRACT NUMBER or ORIGINAL DOCUMENT NUMBER

· DELIVERY ORDER NUMBER (as applicable)

· CLIN / MATERIAL NUMBER

· SPECIFIC QUANTITY SHIPPED IN REFERENCE TO QUANTITY ORDERED

· PRINTED NAME AND WRITTEN SIGNATURE OF A GOVERNMENT EMPLOYEE

15. PACKING AND MARKING REQUIREMENTS: All shipping containers shall be packaged best commercial practice in accordance with ASTM D3951-10 and marked in accordance with MIL-STD-129R. All shipments shall contain proper shipping documentation. Contractor shall attach a water-resistant envelope containing all mandatory commercial shipping documentation to the exterior of the shipment. Special Marking Requirements. Each shipping container shall have special markings as required by the applicable ASTM guideline(s).

16. SYSTEM FOR AWARD MANAGEMENT (SAM): In accordance with FAR Provision 52.204-7 System for Award Management, a prospective awardee shall be registered in the SAM database by the quotation submission date, during performance and through final payment of any contract resulting from this CSS. Quoters may obtain information on registration and annual confirmation requirements via the SAM website at http://www.sam.gov. Contractor shall type company name, address, and CAGE code exactly as it appears in the SAM Database.

Company Name:

Company Address:

Telephone:

CAGE Code:

Point of Contact:

Email:

17. INVOICING AND PAYMENT: Invoicing and Payment will be made via Wide Area Workflow. See DFARS Clause 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports and DFARS Clause 252.232-7006 Wide Area Workflow Payment Instructions.

18. QUESTIONS. Questions regarding this CSS shall be submitted by electronic mail to the Acquisition Specialist, via email Tom Semones at thomas.semones@dla.mil Subject: SP3300-23-Q-0218 CSS Question. Question(s) must be received by 12:00 PM ET on October 31, 2024. Answers to questions will be posted to the www.sam.gov website via an amendment to the CSS.

19. The Government is not soliciting for the “same old way” of doing business. The Government encourages quotes that will achieve savings through innovative processes. Furthermore, DLA Distribution personnel are working to eliminate unnecessary requirements and negotiating for a reduction in supplies/material prices. Therefore, your assistance is requested in reducing prices and improving our buying process.

20. MARK CONTRACT NUMBER ON ALL CORRESPONDENCE: The contractor must mark the contract or delivery order number on all paperwork and shipments. The order number must appear on the exterior of the shipment. Failure to follow these instructions will hold up payment to you and could result in the return of merchandise at your expense.

SCHEDULE OF SUPPLIES/SERVICES

See Attachment 1 – Schedule of Supplies Quoters shall quote Fixed Unit Prices for all line items shown in Attachment 1 - Schedule of Supplies (i.e., CLINs 0001 through 0009; 1001 through 1009; 2001 through 2009, 3001 through 3009, and 4001 through 4009). All unit prices shall be quoted as FOB DESTINATION pricing.

INDEPENDENT PRICING:

The quoter is the Manufacturer OR Distributor of this product (check one):

If a Distributor, the quoter is quoting a product made by the following manufacturer:

X001

X002

X003

X004

X005

X006

X007

X008

X009

If a Distributor, quoter is free to set their own pricing: _______YES or _______NO

CONTRACT CLAUSES

ADDENDA to 52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services (NOV 2023)

THE FOLLOWING CLAUSES ARE INCORPORATED BY REFERENCE:

THE FOLLOWING CLAUSES ARE INCORPORATED BY FULL TEXT:

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (MAY 2024)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(C) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: Not Applicable (End of Clause) 52.211-9 Desired and Required Delivery (JUN 1997)

(a) The Government desires delivery to be made according to the following schedule:

DESIRED DELIVERY SCHEDULE – All items within 30 days.

If the quoter is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its quote, propose a delivery schedule below. However, the quoter’s proposed delivery schedule must not extend the delivery period beyond the time for delivery in the Government’s required delivery schedule as follows:

REQUIRED DELIVERY SCHEDULE – All items with 30 days.

Quoters that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the quoter proposes no other delivery schedule, the desired delivery schedule above will apply.

QUOTER’S PROPOSED DELIVERY SCHEDULE: All items with _____ days after date of contract award.

(b) Attention is directed to the Contract Award provision of the solicitation that provides a written award or acceptance of a quote mailed or otherwise furnished to the successful quoter results in a binding contract. The Government will furnish to the quoter an award or notice of award not later than the day the award is dated. Therefore, the quoter shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer. However, the Government will evaluate a quote that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) one working day if the solicitation states the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the quoted delivery date is later than the required delivery date, the quoter will be considered nonresponsive and rejected.

(End of Clause)

FAR 52.216-18 Ordering (Aug 2020)

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from December 1, 2024 through November 30, 2029.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) A delivery order or task order is considered "issued" when—

(1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;

(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or

(3) If sent electronically, the Government either—

(i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or

(ii) Distributes the delivery order or task order via email to the Contractor's email address.

(d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.

(End of Clause) 52.216-19 Order Limitations (OCT 1995) (a) Minimum Order. When the Government requires supplies or services covered by this contract in an amount of less than $21,791.78, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum Order. The Contractor is not obligated to honor --

(1) Any order for a single item in excess of $60,223.00;

(2) Any order for a combination of items in excess of $181,373.25; or

(3) A series of orders from the same ordering office within thirty (30) days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within ten (10) days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of Clause)

FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR - https://www.ecfr.gov/current/title-48/chapter-1 DFARS - https://www.acq.osd.mil/dpap/dars/dfarspgi/current/

DLAD - https://www.dla.mil/Acquisition/Policy-and-Directives/ (End of Clause)

FAR 52.252-6 Authorized Deviations in Clauses (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the clause.

(b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of Clause) DFARS 252.211-7003 Item Unique Identification and Valuation (JAN 2023)

(a) Definitions. As used in this clause—

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed repairables and DoD serially managed nonrepairables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of Clause) 252.225-7967 Prohibition Regarding Russian Fossil Fuel Business Operations (Deviation 2024-O0006)

(a) Definitions. As used in this clause—

“Business operations” means knowingly engaging in commerce in any form, including acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other known apparatus of business or commerce. The term does not include—

(1) Any shipment subject to price caps as specified in the —

(i) “Statement of the G7 and Australia on a Price Cap for Seaborne Russian-Origin Crude Oil”, issued on December 2, 2022, between member countries of that coalition; or

(ii) “Statement of the G7 and Australia on Price Caps for Seaborne Russian-Origin Petroleum Products Berlin, Brussels, Canberra, London, Ottawa, Paris, Rome, Tokyo, Washington”, issued on February 4, 2023, between such members, if such shipment complies with the applicable price caps; or

(A) Actions taken for the benefit of the country of Ukraine, as determined by the Secretary; or

(B) Actions taken to support the suspension or termination of business operations for commercial activities during the period beginning on the effective date and ending on December 31, 2029, including—

(1) Any action to secure or divest from facilities, property, or equipment;

(2) The provision of products or services provided to reduce or eliminate operations in territory internationally recognized as the Russian Federation or to comply with sanctions relating to the Russian Federation; and;

(3) Activities that are incident to liquidating, dissolving, or winding down a subsidiary or legal entity in Russia.

Fossil fuel company means an entity or individual that—

(1) Carries out oil, gas, or coal exploration, development, or production activities;

(2) Processes or refines oil, gas, or coal; or

(3) Transports, or constructs facilities for the transportation of, Russian oil, gas, or coal.

(b) Prohibition. In accordance with section 804 of the National Defense Authorization Act for Fiscal Year 2024 (Pub. L. 118-31), the Contractor is prohibited from entering into a subcontract or other contractual instrument for the procurement of products or services with any entity or individual that is known to be, or that is known to have fossil fuel business operations with an entity or individual that is, not less than 50 percent owned, individually or collectively, by—

(1) An authority of the government of the Russian Federation; or

(2) A fossil fuel company that operates in the Russian Federation, except if the fossil fuel company transports oil or gas—

(i) Through the Russian Federation for sale outside of the Russian Federation; and

(ii) That was extracted from a country other than the Russian Federation with respect to the energy sector of which the President has not imposed sanctions as of the date on which the contract is awarded.

(c) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts and other contractual instruments, including those for the acquisition of commercial products or commercial services.

(End of Clause)

DFARS 252.232-7006 Wide Area Workflow Payment Instructions (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic Invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF Access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF Training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF Methods of Document Submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF Payment Instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer. Invoice.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer. Not Applicable

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract. [Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document Routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(4) Payment Request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving Report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF Point of Contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact. N/A

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of Clause)

DLAD PROCUREMENT NOTES

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)

The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

(End of Procurement Note) C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2020)

(1) By submitting a quotation or offer, the contractor, if it is not the manufacturer of the item, is confirming it currently has, or will obtain before delivery, and shall retain documented evidence (supply chain traceability documentation), as described in paragraph (2) of this procurement note, demonstrating the item is from the approved manufacturer and conforms to the technical requirements.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source’s Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, if available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) website (http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance-Program/).

(4) The contractor shall immediately make documentation available to the contracting officer upon request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for six years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

(End of Procurement Note) C09 Economic Price Adjustment – Department of Labor Index (JUN 2020)

(a) Warranties. The contractor warrants that—

(1) The base unit prices set forth in the Schedule do not include allowances for any portion of the contingency covered by this procurement note; and

(2) Prices invoiced shall be computed in accordance with the terms of this procurement note.

(b) Definitions. As used throughout this procurement note—

(1) "Index", for the purpose of price adjustment under this procurement note, means the Producer Price Index(es) reported in the monthly publication entitled, “Producer Price Indexes”, published by the United States (U.S.) Department of Labor (DOL), Bureau of Labor Statistics (BLS) for the following code number(s) and title(s):

(contracting officer fill- in) ; or the Employment Cost Index(es) reported in the quarterly publication entitled, “Employment Cost Indexes,” published by the United States (U.S.) Department of Labor (DOL), Bureau of Labor Statistics (BLS) for the following code number(s) and title(s):

(contracting officer fill-in)

(2) "Base index" means the arithmetic average of the final version of the indexes published for the months, or quarters for ECI, preceding the closing date for receipt of proposals or the date required for receipt of final proposal revisions, if discussions were held.

(3) "Adjusting index" means the arithmetic average of the [ ] first published or [ ] final version of the index for the months, or quarters for ECI, prior to the month in which the adjusting contract modification is effective.

(4) "Base unit price" means the unit price applicable to a quantity of a contract line item established at contract award, exclusive of any price adjustment pursuant to this procurement note.

(5) “Adjustment period” means the period during which a particular adjustment to the unit price under this procurement note (calculated at the beginning of the adjustment period) will apply. The length of each adjustment period in months is the number of adjustments allowed per year in (c)(1) below divided by 12.

(c) Adjustments.