SP3300-20-Q-0143.docx

SP3300-20-Q-0143

NOTICE TO OFFERORS

1. Issuing Office:

DLA Distribution Acquisition Operations (J7) 430 Mifflin Avenue, Suite 3102A New Cumberland, PA 17070-5008

2. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6- Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quote (RFQ) and the solicitation number is SP3300-20-Q-0143.

3. This notice incorporates provisions and clauses in effect under:

The complete text of any of the clauses and provisions are available electronically from the following sites:

FAR- https://www.ecfr.gov (Reference Title 48, Chapter 1) DFARS - https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ DLAD - http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

4. This Request for Quotation (RFQ) is being issued to establish a Firm-Fixed Price (FFP) contract for purchase of Rock Salt for DLA Distribution Susquehanna PA. The Government intends to award one contract as a result of this RFQ and will be issued on a Standard Form (SF) 1449.

5. DLA Distribution is soliciting this requirement on a 100% Small Business Set-Aside basis. The North American Industry Classification System (NAICS) code for this procurement is 212393 and the size standard is 500 employees. The PSC Code for this procurement is 6810. This acquisition is not a Defense Priorities and Allocations System (DPAS) rated procurement.

6. DELIVERY: Pricing shall be quoted as FOB Destination.

7. PACKING AND MARKING REQUIREMENTS: All products shall be packaged best commercial practice in accordance with ASTM 3951. All shipments must contain proper shipping documentation. Contractor shall attach, in a water resistant envelope, to the exterior shipping container a commercial packing list. All documents must include at a minimum, contract number and document number for the item, stock number, quantity, and unit of issue. Omission of any data on the shipping documentation could cause a delay in receipt of goods and significantly delay payment.

8. REQUIREMENTS FOR PALLETS: Material must be shipped on serviceable, winged pallets in accordance with MD00100452, Revision C, dated 09/2016. Please reference the following link for more information:https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/Palletization.aspx The complete specification for winged pallets can be found in Part 9 of ANSI MH1. The pallet must be heat treated, certified, and stamped or branded with the appropriate certification markings in accordance with DOD Manual 4140.65-M. Please reference the DLA Master List of Technical and Quality Requirements for information at this link: https://www.dla.mil/HQ/Acquisition/Offers/DLAD/TechnicalandQualityMLofRequirements/ Additional information can be found at:

https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packaging/WoodPack.aspx Failure to deliver supplies on pallets with these specifications will result in the Government not accepting the shipment when it arrives at destination. The offeror must quote shipment of supplies in accordance with this requirement.

9. SYSTEM FOR AWARD MANAGEMENT: IAW FAR 4.1102(a), offerors are required to be registered in the System for Award Management (SAM) database at the time an offer or quotation is submitted in order to comply with the annual representations and certifications requirements. Refer to DFARS 204.1103 for helpful information on navigation and data entry in the SAM database. Registration may be done on line at: www.acquisition.gov or www.sam.gov. Contractor shall provide company name, address, CAGE Code, and DUNS Number exactly as it appears in the DoD System for Award Management Database.

Company Name: _________________________________ Company Address: _________________________________ CAGE Code: _________________________________ DUNS Number: _________________________________ Contractor POC: _________________________________ Telephone: _________________________________ Email: _________________________________

10. INVOICING AND PAYMENT: Invoicing and Payment will be made via Wide Area WorkFlow. See DFARS Clauses 252.232-7006 and 252.232-7003.

11. MARK CONTRACT NUMBER ON ALL CORRESPONDENCE:

Contractor must mark the contract or purchase order number on all paperwork and shipments. The order number must appear on the exterior of the shipment. Failure to follow these instructions will hold up payment to you and could result in the return of merchandise at your expense.

12. SHIP TO:

DLA Distribution Susquehanna Maintenance Support Section 5750 3rd St., Bldg. 750 New Cumberland PA 17070

Note- Mark for: ODN SB322202380ABH

13. Questions shall be submitted by electronic mail to the Acquisition Specialist, joseph.crowleyf@dla.mil, Subject: SP3300-20-Q-0143 Solicitation Question(s). Question(s) must be received by September 04, 2020, 1:00PM Eastern Time. Answers to questions will be posted to the Beta.Sam.gov website via an amendment to the solicitation.

ATTACHMENTS

Attachment 1 Statement of Work

SCHEDULE OF SUPPLIES

CLIN 0001:

Contractor shall deliver bulk rock salt with non-hardening agents on an as needed basis to DLA Distribution Susquehanna, New Cumberland, PA (DDSP). Rock salt shall comply with ASTM D632-99.Type 1 Grade 1. (See Attachment 1 Statement of Work)

Quantity: 1,000 Tons (TN)

Unit Price $__________________TN, x Qty 1,000/TN = Extended Price $______________________ FOB Destination SHIPPING INCLUDED IN PRICE

Delivery within 3-5 days after notification from Government POC.

Government will order a minimum of 20 tons per call.

Contractor will be paid for the actual number of tons delivered.

CLAUSES AND PROVISIONS

Addenda to FAR 52.212-4 (Contract Terms and Conditions-Commercial Items Oct 2018)

CLAUSES INCORPORATED BY REFERENCE:

52.212-5 Contract Terms and Conditions Required to Implement Statutes Executive Orders –Commercial Items (AUG 2020)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

CLAUSES INCORPORATED BY FULL TEXT:

FAR 52.252-2 Clauses Incorporated By Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR- https://www.ecfr.gov (Reference Title 48, Chapter 1) DFARS - https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ DLAD - http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

(End of Clause)

DFARS 252.211-7003 Item Unique Identification and Valuation (MAR 2016)

(a) Definitions. As used in this clause— “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description (If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003 . If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause) 252.232-7006 Wide Area WorkFlow Payment Instructions (DEC 2018)

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

INVOICE

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Not Applicable

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

PROVISIONS INCORPORATED BY REFERENCE:

PROVISIONS INCORPORATED BY FULL TEXT:

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items.

(a) Definitions. As used in this provision- Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services.”

(d) Representations. The Offeror represents that—

(1) It [] will, [] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will” in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It [] does, [] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision) FAR 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that—

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

DFARS 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations. (SEP 2019)

(a) The Supplier Performance Risk System (SPSR) application (https://www.sprs.csd.disa.mil) will be used in the evaluation of suppliers past performance in accordance with DFARS 213.106-2(b)(i).

(b) SPRS collects quality and delivery data on previously awarded contracts and orders from existing Department of Defense reporting systems to classify each supplier s performance history by Federal supply class (FSC) and product or service code (PSC). The SPRS application provides the contracting officer quantifiable past performance information regarding a supplier's quality and delivery performance for the FSC and PSC of the supplies being purchased.

(c) The quality and delivery classifications identified for a supplier in SPRS will be used by the contracting officer to evaluate a supplier s past performance in conjunction with the supplier s references (if requested) and other provisions of this solicitation under the past performance evaluation factor. The Government reserves the right to award to the supplier whose quotation or offer represents the best value to the Government.

(d) SPRS classifications are generated monthly for each contractor and can be reviewed by following the access instructions in the SPRS User’s Manual found at 1ttps://www.sprs.csd.disa.mil/reference.htm. Contractors are granted access to SPRS for their own classifications only. Suppliers are encouraged to review their own classifications, the SPRS reporting procedures and classification methodology detailed in the SPRS User's Manual, and SPRS Evaluation Criteria available from the references at https://www.sprs.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf. The method to challenge a rating generated by SPRS is provided in the User s Manual.

(End of provision)

DLAD 52.233-9001 Disputes – Agreement To Use Alternative Dispute Resolution

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1), or, for the Agency, by the contracting officer, and approved at a level above the contracting officer after consultation with the ADR Specialist and legal counsel. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the contracting officer before determining ADR to be inappropriate.

(c) If you wish to opt out of this clause, check here [ ]. Alternate wording may be negotiated with the contracting officer.

(End of provision)

ADDENDA TO FAR 52.212-1 INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS (JUN 2020)

Reference paragraph (c) under referenced provision FAR 52.212-1. This paragraph is tailored to read as follows:

(c) Period of acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers.

The following (2) paragraphs under referenced provision FAR 52.212-1 are hereby deleted:

QUOTE PREPARATION INSTRUCTIONS

GENERAL

1. All quotes must be received electronically via email at: joseph.crowley@dla.mil, Subject: SP3300-20-Q-0143 Quotation – “Offeror’s Company Name”. Quotations must be received by September 11, 2020, 1:00PM Eastern Time to be considered for award. Facsimile and hard copy submissions of quotes will not be accepted.

2. QUOTE MUST HAVE THIS STATEMENT IN THE FOOTER OR HEADER OF EACH PAGE: “SOURCE SELECTION INFORMATION - SEE FAR 2.101 and 3.104”

3. QUOTES MUST INCLUDE THE FOLLOWING ITEMS. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award.

A. Representations and Certifications:

(1) Contractors are required to include a completed copy of the FAR provision 52.212-3 Offeror Representations and Certifications-Commercial Items with its quote or may indicate completion of the representations and certifications on the internet at http://www.sam.gov. Failure to include the certifications along with the price quote or to complete the certifications on the internet may result in elimination from consideration for award.

(2) Contractors are required to include a completed copy of FAR provision 52.204-24(AUG 2020) with quote submission.

B. Quotations may be submitted in contractor format and shall include:

(1) Company name, Address, Point of Contact, Telephone number, and E-mail address

(2) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code

(3) Solicitation Number

(4) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation)

(5) If Offeror is quoting as a distributor/reseller provide a completed copy of the following statement:

“___________________________________ (Company Name) is an authorized distributor/reseller for_________________________________ (Manufacturer Name) products and is free to set our own prices and discounts.”

(6) The offeror’s price quote shall reflect the unit price and total price which shall include all packaging and shipping costs.

(End of Provision)

Addenda FAR 52.212-2 – EVALUATION – COMMERCIAL ITEMS (OCT 2014)

Quotes will be evaluated in accordance with FAR 13.106-2. The Government intends to evaluate quotes in response to this solicitation and will award one firm-fixed price purchase order on an all-or-none basis to the responsible offeror with the technically acceptable lowest price offer.

Failure to provide a complete, detailed, realistic, and reasonable quote may reflect a lack of understanding of the requirements and may result in a determination that the offeror’s quote is unacceptable. The Government does not assume a duty to search for clarification data to cure problems or inconsistencies with an offeror’s quote.

Offerors must be determined to be responsible according to the standards of FAR Part 9 to be eligible for award.

Although the Government intends to award a purchase order as a result of this solicitation, the Government reserves the right to reject any and all quotes received and not award any item or items from this solicitation.

TECHNICAL FACTOR

The following criteria shall be used to establish technical acceptability:

The rock salt shall comply with ASTM D632-99.Type 1 Grade 1. The contractor can meet all requirements in the statement of work.

PAST PERFORMANCE FACTOR

The Government will evaluate the offeror’s Past Performance to determine acceptability of the quote in response to this solicitation. Past Performance will be evaluated on an acceptable/unacceptable basis and shall not be rated. The offeror will be evaluated on their past performance record and any other relevant information obtained from available sources which may include: Supplier Performance Risk System (SPRS), the Contractor Performance Assessment Reporting System (CPARS) at https://www.cpars.gov;or other databases.

In the case of a supplier without a record of relevant past performance history in SPRS for the PSC of the supplies being purchased, the supplier will not be evaluated favorably or unfavorably for its past performance history. In the context of acceptability/unacceptability, “unknown” shall be considered acceptable.

PRICING FACTOR

If a quote has been determined acceptable under each of the non-price factors listed above, the Government will then evaluate the quote for the lowest price. The lowest proposed total price between offers that are determined to be technically acceptable will be the determining factor in the selection of a quote for award. Price analysis shall not be conducted on offerors determined to be unacceptable for award, since the offeror will not be in line for award as the lowest priced technically acceptable offeror.

The Government will perform a price analysis to determine the reasonableness of proposed price in accordance with FAR 15.404-1(b). The Government will utilize a comparison of proposed prices received in response to the solicitation.

A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

FAR 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

FAR- https://www.ecfr.gov (Reference Title 48) DFARS - https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ DLAD - http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

(End of Provision)

52.212-3 Offeror Representations and Certifications—Commercial Items (JUN 2020).

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award…