Exhibit_E_Tank_B-1_FOR_Tests.pdf

Date: 18/Jan/2017

Defense Finance and Accounting Service-Columbus

P.O BOX 182317

COLUMBUS OH, 43218-2317

GUAM

GUAM

Certificate of Analysis: GO16-00593.001

The results shown in this test report specifically refer to the sample(s) tested as received unless otherwise stated. All tests have been performed using the latest revision of the methods indicated, unless specifically marked otherwise on the report. Precision parameters apply in the determination of the below results. Users of the data shown on this report should refer to the latest published revisions of ASTM D3244; IP 367 and ISO 4259 and when utilising the test data to determine conformance with any specification or process requirement. With respect to the

UOP methods listed in the report below the user is referred to the method and the statement within it specifying that the precision statements were determined using UOP Method 999. This

Test Report is issued under the Company’s General Conditions of Service (copy available upon request or on the company website at www.sgs.com). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues defined therein. This report shall not be reproduced except in full, without the written approval of the laboratory.

WARNING: The sample(s) to which the findings recorded herein (the “Findings”) relate was(were) drawn and / or provided by the Client or by a third party acting at the Client’s direction. The

Findings constitute no warranty of the sample’s representativeness of any goods and strictly relate to the sample(s). The Company accepts no liability with regard to the origin or source from which the sample(s) is/are said to be extracted.

This laboratory is accredited under ISO/IEC 17025. The results reported herein have been performed in accordance with the laboratory’s term of accreditation except calibrations/tests marked with an asterisk (*) in this report which are not within the scope of accreditation for our laboratory.

302295SGS ORDER NO.:SPE600-16-C-5014CLIENT ORDER NUMBER :

CLIENT ID : 1600000010

LOCATION : NAVSUP PRODUCT DESCRIPTION : Fuel Oil - Reclaimed / SLOP

Tank B-1SAMPLE SOURCE :

ClientSAMPLE BY :All LevelSAMPLE TYPE :

20/Dec/2016RECEIVED :21/Dec/2016SAMPLED :

18/Jan/201722/Dec/2016 - 18/Jan/2017ANALYSED : COMPLETED :

a. FED-STD-791

b. MIL-F-29451B(SA) dtd 10 Feb 1995

c. MIL-STD-3004D

d. American Society For Testing & Materials for Petroleum Products, Lubricants, & Fossil Fuels

e. Product NSN: 9140-01-068-6903

f. Product Code: FOR

REPORT COMMENT :

The laboratory analysis for the Sub-Contract Laboratory tests are provided by:

S2 - S2 - Subcontracted to another SGS - ISO 17025 Laboratory - SGS Australia

PROPERTY METHOD RESULT UNITS MIN FalseMAX

---Appearance Visual --Black --kg/m³Density at 15°C ASTM D4052 --833.2 --

°APIAPI at 60°F ASTM D4052 4038.2 25

% (m/m)Total Sulfur Content ASTM D4294 2.00.280 --cStKinematic Viscosity at 40°C (104°F) ASTM D445 15.02.350 2.0

% (m/m)Sediment by Extraction ASTM D473 0.50 --

°CFlash Point by PMCC ASTM D93 (Procedure A) --65.0 38.0

SUSSaybolt Universal Viscosity at 50°C * ASTM D2161 9033.8 30 mg/kgTotal Chlorine (Method B) * ASTM D5384 --<1000ppm --

---PP - Thermometer Serial Number ASTM D97 --67472 --

°CPour Point ASTM D97 ---30 --

---Neutrality in Liquid * FSTM 791C - 5101.7 --Neutral Neutral

% (m/m)Sulfated Ash ASTM D874 0.15<0.005 --

% (V/V)Water and Sediment ASTM D1796 2.00.00 --

---Explosiveness * FSTM 791C - 1151.2 5020.9 --

S2 - Elements in used Lube Oils and Base Oils by

ICP-AES *

ASTM D5185

Arsenic § * mg/kg<1 5--

§ - Analyte not in published method scope

AUTHORISED SIGNATORY

LOVELL NUCUM

Laboratory Supervisor

AUTHORISED SIGNATORY

LOVELL NUCUM

Laboratory Supervisor

1801201711310000004323 Page 1 of 2 OGC-En_report-2014-10-10_v59K

810 West Marine Corps. Drive, Hagatna, Guam 96910 tel:+1(671)588-2922 www.sgs.com

Member of the SGS Group ( Société Générale de Surveillance )

SGS Guam Inc.

Date: 18/Jan/2017

Defense Finance and Accounting Service-Columbus

P.O BOX 182317

COLUMBUS OH, 43218-2317

GUAM

GUAM

Certificate of Analysis: GO16-00593.001

This laboratory is accredited under ISO/IEC 17025. The results reported herein have been performed in accordance with the laboratory’s term of accreditation except calibrations/tests marked with an asterisk (*) in this report which are not within the scope of accreditation for our laboratory.

302295SGS ORDER NO.:SPE600-16-C-5014CLIENT ORDER NUMBER :

CLIENT ID : 1600000010

LOCATION : NAVSUP PRODUCT DESCRIPTION : Fuel Oil - Reclaimed / SLOP

Tank B-1SAMPLE SOURCE :

ClientSAMPLE BY :All LevelSAMPLE TYPE :

20/Dec/2016RECEIVED :21/Dec/2016SAMPLED :

18/Jan/201722/Dec/2016 - 18/Jan/2017ANALYSED : COMPLETED :

a. FED-STD-791

b. MIL-F-29451B(SA) dtd 10 Feb 1995

c. MIL-STD-3004D

d. American Society For Testing & Materials for Petroleum Products, Lubricants, & Fossil Fuels

e. Product NSN: 9140-01-068-6903

f. Product Code: FOR

REPORT COMMENT :

The laboratory analysis for the Sub-Contract Laboratory tests are provided by:

S2 - S2 - Subcontracted to another SGS - ISO 17025 Laboratory - SGS Australia

PROPERTY METHOD RESULT UNITS MIN FalseMAX

Cadmium § * mg/kg<1 2--

Chromium * mg/kg<1 10--

Lead * mg/kg<1 100--ppm (m/m)S2 - PCB * ASTM D4059 --<2 --ppm (m/m)S2 - Arochlor 1242 * ASTM D4059 --<2 --ppm (m/m)S2 - Arochlor 1260 * ASTM D4059 --<2 --

** End of Analytical Results **

§ - Analyte not in published method scope

This document is only valid in its entirety and your attention is drawn to the Terms and Conditions on Page 1 of this report.

AUTHORISED SIGNATORY

LOVELL NUCUM

Laboratory Supervisor

AUTHORISED SIGNATORY

LOVELL NUCUM

Laboratory Supervisor

1801201711320000004323 Page 2 of 2 OGC-En_report-2014-10-10_v59K

810 West Marine Corps. Drive, Hagatna, Guam 96910 tel:+1(671)588-2922 www.sgs.com

Member of the SGS Group ( Société Générale de Surveillance )

SGS Guam Inc.