Product Pressure Flow Rate

PRODUCT PRESSURE AND FLOW RATE/TANK DESCRIPTION

PRODUCT STORAGE

CAPACITY

# OF

STORAGE

TANKS

ROUTINE DELIVERY

– MINIMUM psig

AT TIME OF OFF-

LOAD

MAWP MINIMUM

PRESSURE TO

SIGNAL

REPLENISHMENT

DESCRIPTION OF STORAGE

TANK

HOSES/CONNECTOR

INFORMATION

Gaseous Hydrogen, GH2

120,000 scf 1 2,000 psig 4,000 psig

Start with 1000 psi and adjust if needed from historical data.

Delivery time will also impact the pressure fill setting.

a. Designed as a series of high pressure tanks.

b. Approximately 20 feet in length, mounted horizontally and no greater than 11 feet high.

c. Tanks are compliant with ASME UPV Code Section VIII, Division 1, and Appendix 22

d. Compatible with operation at minus 20 degrees F to 200 degrees F.

e. Tanks are connected to two separate regulated supplies to the building, one of the supplies is regulated to 250 psig and the other is regulated to 150 psig.

a. Contractor shall provide off-load hoses with a minimum length of 25 feet.

b. The fill connections available to the Contractor are standard industrial CGA bulk fittings.

c. Contractor shall ensure proper interface between tanks and offloading unit.

FXS0199

Typewritten Text

ATTACHMENT 1