SOW (V2) - REVIEWED AND APPROVED.doc
DOC document 392 KB Posted
- Attached to
- Red Light & Siren Install on 6 Vehicles Federal contract opportunity
- Solicitation number
- 1240LS26Q0005
- Issued by
- Department of Agriculture Forest Service
About this file
This is a Statement of Work (SOW) for the installation of emergency lighting, siren, and communication console packages on six 2024 Ford vehicles for the U.S. Forest Service. The scope covers two Ford F-350 extended cab utility bodies (EN6720, EN6721), three Ford F-250 crew cab full-size pickup trucks (EN6792, EN6793, EN6895), and one Ford F-150 extended cab pickup (EN6897). All vehicles are equipped with gasoline engines ranging from 2.7L to 6.8L displacement. The work must be completed within 15 days of vehicle delivery, with vehicles to be delivered and picked up within 100 road miles of the Humboldt-Toiyabe National Forest Supervisors Office in Sparks, Nevada; the vendor is responsible for towing costs beyond that radius. A 30-day advance notice is required for vehicle delivery.
The technical requirements include supply and installation of a 48- or 55-inch LED strobe light bar with 360-degree red/white FIRE capability, take-down and alley/scene lights, amber directional traffic lights mounted to the roof, two LED red/white strobes in the upper front grill corners, two red LED strobes on the upper rear bed, rear-facing amber LED traffic director with dim capability, red LED lights integrated into the taillight housing, and a minimum 100-watt compact composite siren speaker. The electrical package must include a siren/light controller with PA microphone, traffic director control, separate light controls, truck key switch activation with dedicated circuits and appropriate current protection, park/kill and timed relay for battery drain protection, and a complete wiring and hardware kit. Console requirements specify a 20-inch sloped wide-body heavy-duty welded steel cab center console with vehicle-specific mounting, dual internal cup holders, radio faceplate mounting for a BK M150 model, light/siren control mounting, two magnetic microphone holders, one 9-inch external locking storage box, two height-adjustable armrests, and wiring for two 12-volt outlets and two USB outlets. Only new parts are authorized; no used components are permitted. The vendor must also drill a roof hole for the Forest Service-supplied antenna and run wiring to the center console. No striping is required for any vehicle.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SERVICE CONTRACT LABOR EXEMPTION FORM.doc | DOC document | |
| RFQ - 1240LS26Q0005.docx | DOCX document | |
| RFQ-1240LS26Q0005.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
(RLS Upfit EN6720, EN6721, EN6792, EN6793, EN6897, EN6895) Provide and Install a Lights, Siren and Package for the following Vehicles in accordance with the Statement of Work.
All work standards apply to ALL vehicles.
Vehicle Information:
Door # EN6720: 2024 Ford F-350, extended cab utility body, 8cyl. Gas 6.8L, VIN 1FTRF3BA1REC61070 Door # EN6721: 2024 Ford F-350, extended cab utility body, 8cyl. Gas 6.8L, VIN 1FTRF3BA7REC63972 Door # EN6792: 2024 Ford F-250, crew cab, full-size pickup truck, 8cyl. Gas 6.8L, VIN 1FT7W2BA4REC53191 Door # EN6793: 2024 Ford F-250, crew cab, full-size pickup truck, 8cyl. Gas 6.8L, VIN 1FT7W2BA7REC52133 Door # EN6897: 2024 Ford F-150, extended cab pickup, 6cyl. Gas 2.7L, VIN 1FTEX1LP0RKD79907 Door # EN6895: 2024 Ford F-250, crew cab, full-size pickup truck, 8cyl. Gas 6.8L, VIN 1FT7W2BAXREE30360
Delivery Location:
USFS will deliver and pick up the vehicle within 100 road miles of:
Humboldt-Toiyabe National Forest Supervisors Office
1200 Franklin Way Sparks NV 89431
Vendor will have to tow to and from, if beyond 100 road-miles of this location.
Special Notices:
A 30-Day notice will be required for delivery of the vehicle to vendor.
Vendor must complete work on the vehicle within 15 days of delivery to the vendor.
Aftermarket console setup is required for installation. No used parts are authorized.
Requirements: Lightbar
Supply and install light bar, grill lights, rear lights, and siren/speaker/control head with truck key switch “On” activated power, dedicated circuit with appropriate current protection
--Supply and install LED strobe light bar, approx. 48 or 55 inches (best fit), 360 deg. red/white FIRE, take down and alley/scene lights, amber directional traffic lights, mounted to roof (see attached sheet for configuration) with lowest profile and rearward as possible. Rear facing Amber LED Traffic
Director, Dim Option for night operations with vehicle specific mounting.
--Supply and install two (6) LED red/white strobes in upper corners of front grill
--Supply and install two red LED strobe lights on upper rear of bed
--Siren/light controller, with PA microphone, traffic director control, and separate controls for all light bar options (alley, takedown, etc.). Minimum 100-Watt Compact Composite Siren Speaker.
--Two Red LED lights to be inserted into taillight housing for rear warning, synched with grill lights.
--Park/kill & timed out relay for battery drain protection.
--Wiring kit, power panel, wire harness, misc. hardware & supplies as required.
Requirements: Siren & Electronics: Siren, Radios, and Console
Install FS Supplied Radio Package not required. Please install hole in the roof for the FS supplied antennae. Run wire from the roof to the center console to facilitate connection. Hole alignments vary so they aren’t universal.
Supply and install sloped wide-body heavy duty cab center console with appropriate vehicle specific mounting plate and options specified below. Console installed should be the console for the ¾ ton pickup.
--One 20” sloped wide-body heavy duty console, 11 gauge welded steel construction
--One internal dual cup holder
--Radio model (BK M150) specifically mounting faceplate(s) as needed
--One light/siren control mounting faceplate for controller provided
--Supply two magnetic mic holders for radio and siren controller microphones mounted to console
--One 9” external wide-body locking storage box attached to rear of primary console
--Two 9” height adjustable arm rests mounted to console sides
--Console wired with two 12-volt outlets and two USB outlets, individual fuse protected power supply for mobile radios, power supply for lights/siren controller wired with truck “on”
Requirements: Striping:
No Striping Required
File details come from the government source that posted it. Updated .