SOW - TOOLS AND EQUIPMENT MECHANIC SHOP 07112024.docx

DOCX document 4 MB Posted Aug 8, 2024

Attached to: INL/Honduras Tools & Equipment HNP Mechanic Shop
Solicitation number: 191NLE24I0030
Issued by: Department of State Office of Acquisition Management

About this file

Written by GovTribe AI · Aug 8, 2024

This document is a Statement of Work (SOW) for the purchase of Mechanic Shop Tools and Equipment with accessories, to be donated to the Honduran National Police (HNP) in Tegucigalpa, Honduras. The Bureau of International Narcotics and Law Enforcement Affairs (INL) is issuing this requirement to promote the modernization and support of the HNP's criminal justice and law enforcement operations.

The SOW specifies the technical requirements for the tools and equipment, including a detailed pricing matrix with over 70 line items. It requires the vendor to provide the tools and equipment, ensure warranty and guarantee services are available in Tegucigalpa, and comply with federal contracting regulations. The contractor shall deliver the items within 90 calendar days after award. Award will be made to the lowest priced, technically acceptable, responsible vendor. The Government will evaluate compliance with technical specifications, warranty period, delivery time frame, and responsibility factors.

View the file

Other files

File	Type	Posted
Sources Sought_RFI PR12588359 Honduras Tools and Equipment.docx	DOCX document	Aug 8, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

U.S. Department of State (DOS)

Bureau of International Narcotics and Law Enforcement Affairs U.S. Embassy – Tegucigalpa, Honduras

Purchase of Tools and Equipment with accessories for Mechanic Repair Shop in Tegucigalpa, Honduras

SECTION 1

SOLICITATION CONSIDERATIONS

1.1 SYSTEM FOR AWARD MANAGEMENT

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov.

1.2 TRADE AGREEMENTS ACT (19 U.S.C. 2512(A)) (TAA)

Pursuant to the Trade Agreements Act (19 U.S.C. 2512(a)) (TAA), Federal acquisitions of supplies may be made only from offerors that shall supply products of an eligible country under any of the free trade agreements entered into pursuant to the TAA. An article is considered a product of a country only if it is wholly a product of that country or if it has been, substantially transformed, in that country into a new and different article of commerce with a name, character, or use distinct from that of the original article(s). Note that any item that is a discreet article as it is sold in commerce, regardless of its ultimate function or use, cannot be considered, substantially transformed, and based solely on its integration into IT or other systems.

1.3 UNAUTHORIZED DISCLOSURE

The Contractor and its employees shall exercise the utmost discretion concerning all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract, which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer.

All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do not cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder.

See FAR 3.104 for additional information.

(Rest of Page Intentionally Left Blank)

SECTION 2

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS/RESPONDENTS

SUBMISSION INFORMATION PERTAINING TO REQUEST FOR QUOTE

2.1 INFORMATION TO CONTRACTOR

Contractors are reminded that information furnished under this Request for Quote (RFQ) may be subject to disclosure under the Freedom of Information Act (FOIA). Therefore, all items that are confidential to business or that contain trade secrets or proprietary or personnel information must be clearly marked. Marking of items shall not necessarily preclude disclosure when Department of State (DOS) determines disclosure is warranted by FOIA. However, if such items are not marked, all information contained within the submitted documents shall be deemed releasable.

2.2 QUESTIONS CONCERNING THE REQUEST FOR PROPOSAL

Offerors are warned against contacting any INL personnel other than the Contracting Officer and Contract Specialist prior to award of the Contract resulting from this RFQ. If such a contact occurs and found to be prejudicial to competing vendors, the vendor making such a contact may be excluded from award consideration.

2.3 CONTRACTOR RELATIONSHIPS

The Department of State (DOS) encourages the use of subcontractors. In addition, the Department requires that any potential Organization Conflict of Interest be identified in the proposal to ensure proper firewalls established prior to award.

2.4 MULTIPLE PROPOSALS/ALTERNATIVE SOLUTIONS

Contractors shall not submit, nor shall the Government accept or evaluate, multiple proposals offering alternative solutions. Contractors shall not submit, nor shall the Government accept or evaluate, multiple solutions within one proposal.

2.5 PERIOD OF ACCEPTANCE OF OFFERS

Contractors shall agree, if the proposal is accepted within ninety (90) calendar days (unless a greater period is inserted by the contractor) from the date specified in the solicitation for receipt of proposals, to furnish any or all of the requirements upon which prices are proposed at the price set opposite each item, performed and/or delivered at the designated point(s) within the time specified.

2.6 SPECIFIC SUBMISSION INSTRUCTIONS

Vendors shall limit the number of pages to no more than fifteen (15), 12 Point Font, Times New Roman, pdf.

Quotes MUST include the following to be considered compliant:

· PRICE: unit and extended prices, inclusive of delivery charges in USD.

· DELIVERY DATE: Proposed delivery date.

· DESCRIPTION: Description/nomenclature of the item being quoted; product literature may be provided. Quotation must demonstrate compliance with all required features. Also include description of warranty terms.

· PAST PERFORMANCE: A list of contracts within the last two (2) years for the provision of comparable equipment to federal or commercial customers. The list shall include contact information (name, organization, email, and phone) and limited to no more than five (5) references.

(Rest of Page Intentionally Left Blank)

SECTION 3

DESCRIPTION OF REQUIREMENTS

3.1 BACKGROUND

The Bureau of International Narcotics and Law Enforcement Affairs (INL) is an instrumental leader in the development of policies and programs to combat international narcotics and crime. INL programs support two of the Department of States' strategic goals: (1) to reduce the entry of illegal drugs into the United States; and (2) to minimize the impact of international crime on the United States and its citizens. One of the many ways to effectively meet these goals is to partner with allied governments both directly and indirectly to promote the modernization of and support the enforcement operations of their foreign criminal justice systems and law enforcement agencies.

INL-H has a requirement to purchase Mechanic Shop Tools and Equipment, with the pertinent accessories, to be donated to the Honduran National Police (HNP for its Spanish Acronym) in Tegucigalpa, which will significantly help to carry out maintenances and repairs in a more efficient way, in a suitable place, with the necessary tools to deliver the vehicles and motorcycles in the shortest possible time; as well as to increase the useful life time cycle of every vehicle and motorcycle belonging to the HNP, all this will directly translate into a more effective transport of investigative teams and greater progress of criminal investigation that take place at a national level. The vendor shall configure to manufacturer standard all the proposed products in accordance with the conditions, requirements, and specifications of this SOW or similar.

The contractor shall provide HNP with the Mechanic Shop Tools and Equipment with the pertinent accessories and ensure warranty/guarantee services are available in Tegucigalpa, Honduras.

3.2 TECHNICAL SPECIFICATIONS

The tools and equipment shall be clean, new, not previously used and must be in optimal operating conditions and quality. All manuals shall be furnished in Spanish.

(ALL SPECIFICATIONS LISTED ARE BRAND NAME OR EQUAL)

Pricing Matrix Deliverables

Mechanic Repair Shop Tools and Equipment with Accessories

Qty

Unit

Unit Price

TOTAL

Wheel Alignment system Exact Linear

(Image for reference only)

2.00

Asymmetric two post lift Two Post Lifts

2.00

Tire changer with swing arm

2.00

Wheel Balancer

2.00

Brake Lathe machine

2.00

Vertical Two stage Air Compressor with filter

Automotive digital scanner/diagnostic tool

2.00

Manual hydraulic press

2.00

Portable Heated Parts Washer

2.00

2 Ton Foldable Engine Crane

2.00

1-Ton Folding Engine Stand

2.00

Telescoping Transmission Jack-Trans

Stainless Steel Air Operated Grease Pump

Electric Wet Steam & Hot Water Pressure Washer

Stainless Steel Wet/Dry Vacuum, 16 Gallon

Pneumatic Brake fluid bleeder Unit, W/2 Adaptors

2.00

Fluke 179 True-RMS Digital Multimeter

2.00

Battery, starting and charging system analyzer

2.00

Automotive battery charger Advance Auto Parts; Car, Engine, Batteries, Brakes, Replacement, Performance & Accessories

2.00

Rolling Bridge Jack 7ton capacity

1.00

Low-Profile Oil Drain Collector-15-Gallon

4.00

Oil measuring container with flexible extension

4.00

Heavy duty mechanics stretcher Snap-On

8.00

Portable automotive oil collector

18-Gallon self-Evacuating Potable Oil Drain

2.00

Alignment Lifts – Alignment Rack

Jack stands 12-ton capacity (Pair)

12.00

6 Ton Heavy duty Hydraulic long chassis service jack

4.00

10 Ton Heavy duty Hydraulic long chassis service jack

1/2-Inch Square Drive Click Torque Wrench CDI

Break lathe extra truck adapters and accessories

2.00

Retractable electric extension with light bulb LUMAPRO Extension Cord Reel with Hand Lamp, Incandescent Lamp with Receptable, 75 W Lamp Watts, 120 V AC-6X756 6X756-Grainger

8.00

Heavy duty Jumper Cables+Storage Case

Pneumatic impact wrench

4.00

24 PC 1/2 Drive Metric Impact Socket Set

3/8-Inch Square Drive Click Torque Wrench CDI

2.00

Strut spring compressor

3.00

52 Pcs heavy duty SAE and metric wrench set

15.00

47 Pcs Heavy duty SAE and metric socket set, 1/2 drive

15.00

Steel Pliers set

8.00

6-Piece Cushion Grip Screwdriver Kit

8.00

Adjustable Oil Filter Wrench with Handle

8.00

CDI Torque Wrench, 1/2 in.Dr, 30 to 250 ft.-lb

Injector cleaning machine

2.00

Injector pressure testing machine

10 Ton Spander

1.00

Autogenous Welding Equipment

1.00

1/2 Inch Hub Set 10-32mm

17.00

Capri Tools 3/8-Inch Drive Impact Socket Set with Adapters and Extensions, Premium Chrome-Moly Steel, 48-Piece

Combination wrench set with case, 27 pieces (6-32 mm)

17.00

Magnetic Screwdriver Set (146 pieces)

17.00

Polishing Hammer Curved Nail 16 Oz

Rubber Mallet 16 Oz Pretul

17.00

Hammer Set

17.00

Wrench Set

17.00

Pliers Set

20-Piece Pliers Kit with Organizer Shelves

17.00

Angle Grinder Tool

1/2″ Extension and Cups Handling Kit

17.00

Socket wrench set

17.00

Screw Clamp

17.00

Electric Air Compressor

3.00

Angle Grinder 7"

2.00

Polisher and Sander

Hammer Drill 1/2 Inch

Pneumatic Tool Case. 71 Pieces

3.00

Air Riveter

4.00

Set Of Long Spin Hubs 3/8" 8-19 Mm 12 Pieces with Support

17.00

Pro CATIII 600V AC/DC digital multimeter

2.00

50Pcs Bolt Extractor Set, Screw Extractors, Easy Out Bolt Extractor Set, Screw Remover and Drill Bits for Removing Broken Bolts, Frozen Bolts, Rounded Bolts

Tubular spanner set (10 pieces, 6 – 27 mm, in roll-up bag)

Retractable Extension Cord Reel

2.00

Flexible Handle Breaker Bar Set 1/4" 3/8" 1/2"

17.00

Presch File set for metal and wood 6 pieces with bag

17.00

Socket set inch drive 3/4 inch 12 points 21 pieces

17.00

Steel Motorcycle ATV Scissor Lift Jack Crank Stand with Motorcycle Front Rear Wheels Lift Universal Bike Swingarm Reel Paddock Stand Combo.

Stanley 6-Inch Gray Bench Vise

To hold in a fixed, stable and safe manner a variety of pieces that need to be worked on. Ideal for use in mechanical workshops, industrial workshops and metal structure workshops 6 inches.

2.00

MEGA professional hydraulic press with 50 tons capacity.

1.00

Shipping to Tegucigalpa, Honduras

1.00

001 Wheel Alignment system Exact Linear Corghi – (BRAND NAME OR EQUAL)

SPECS:

User friendly	Corghi Icon user friendly graphics. Simple and efficient easy to learn, fast to select. Ergonomic worktop
High Resolution Target	Unique High resolution 80 x 80 and 80 x 90 target board
High Quality Camera	Next generation camera with high resolution HiQ lenses
Camera Movement Kit	Camera movement kit alows the operator to work from pit level to over 2.00 meters by pressing a key on the keyboard. Fast and easy.
Drive On Assistant	Drive on assistant for safe manouvering in the workshop without additional operator or mirror.
Training on the use of equipment	Required

002 Asymmetric Two Post Lifts – (BRAND NAME OR EQUAL)

Lifting Capacity 18,000 lbs. (8,165 kg) A Rise 69” (1753mm) B Rise + Pad 74.5” (1892 mm) C Rise + Pad+ Adapter 80” (2032mm) D Min Height + Pad 6.5” (165mm) Time to full Rise 45 seconds Outside Dimensions E Height Overall 169” (4293mm) F Width Overall 155” (3937 mm) G Outside Columns 142.5” (3620 mm)

Inside Dimensions	H Inside Columns 119.5” (3035mm)
		I Drive Thru Clearance 104.75” (2661 mm)
		J Floor to overhead Switch 163” (4140 mm)
Arms and Pads	K Front arm reach (MIN) 37.25” (946 mm)
		K Front arm reach (MAX) 58” (1473 mm)
		L Rear arm reach (MIN) 37.25” (946 mm)
		L Rear arm reach (MAX) 58” (1473 mm)

Max Load per arm 4,500 lbs (2041 kg) Noise 45 Db Training on the use of equipment Required

003 Tire changer with swing arm– (BRAND NAME OR EQUAL)

SPECS:

Name				Clamping Tire Changer with Left Side Press Arm
Number			TC-950-WPA
Max wheel diameter		47”
Max wheel width		3”- 15”
Rim diameter inside		15”- 28”
Rim diameter outside		13”- 24”
Working pressure		10 bar
Power supply			11⁄2 hp 110 vac
Bead breaker			2500 kg
Training on the use of equipment	Required

004 Wheel Balancer Corghi– (BRAND NAME OR EQUAL)

Technical Data				EM9250
Max. Wheel Diameter w/Guard		44" (1117 mm)
Max Wheel Width w/Guard			23.6" (600 mm)
Max. Wheel Weight (ground fastening)	165 lbs. (75kg)
Rim Diameter Setting Range			1.5” - 20"
Rim Diameter Setting Range			1” - 35"
Rim Diameter Measurement Range		10” - 28"
Shaft Diameter				40 mm
Maximum Wheel/Machine Distance		10.82" (275mm)
Spinning Speed				90 - 130 rpm
Max. Unbalance Value Calculated		999 g
Unbalance Measurement Accuracy		0.0353 oz (1g)
Average Measurement time			7 s
Total Power Absorption			100 W
Power Supply					115/230 V - 1 Ph - 50/60 Hz
Machine Weight (without accessories)	79 kg / 174,2 lbs
Training on the use of equipment		Required

005 Brake Lathe machine– (BRAND NAME OR EQUAL)

SPECS:

Brand	RANGER RL-8500XLT Heavy-Duty Combination Brake Lathe
Other Specs	• Extended capacity spindle can be used on brake drums 10” deep

• Rear bushing location provides extra support for the arbor

• Capable of truing even the heaviest drum rotors

• In contrast to mechanically-driven transmission and gear boxes, the RL-8500XLT uses precision electric DC servo motors designed to meet the demanding requirements of industrial motion control

• Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones

• Works on all cars or trucks, both foreign and domestic, with hubless drums, rotors (center hole sized 2-5/32” – 4”) and composite rotors (center hole sized 4” – 6.25”)

• The RL-8500XLT is equipped with features that help increase your service capability, like precision twin cutter tools and a quick drum-to-rotor changeover

• Infinitely variable spindle and cross feed speed settings allow for quick rough and precision finish cuts

• Simple ergonomic controls are designed for minimal operator movement

• Legendary control makes unit easy to learn and master.

• The RL-8500XLT maintains accuracy year after year thanks to ruggedly constructed components, like a hardened, precision ground spindle that resists grooving and makes boots a thing of the past

• Massive, tapered spindle bearings offer superior weight support during rotation

• "splash-lube" oil-feed system supplies a constant flow of oil to the bearings making sure they provide years of trouble-free service

• Serpentine belts provide a faster, quieter operation, reducing chatter and vibration

• An independent cross-feed motor eliminates the need for plastic or bronze shear gears which are expensive and time consuming to replace

• A convenient top storage tray means your popular adapters and tools are kept within short reach

• Separate motors on the drum and rotor feed help maximize the main motor's efficiency

• Our deluxe standard adapter package includes a Quick-Change hubless adapter system that makes mounting rotors and drums quick and easy

• A variety of adapters let your machine all standard and composite rotors for foreign and domestic cars and light trucks

• A 450-lb. cast iron body and a solid work bench reduces transient vibrations, ensuring a smooth uninterrupted surface finish with each pass

• Easily change arbor speeds in seconds: choose 150 or 200 rpm, depending on the job

• Positive rake cutter tip angle provides for a single pass finish virtually every time, allowing you to complete your work faster than with inferior multi-pass lathes.

Training on the use of equipment Required

006 Vertical Two stage Air Compressor with filter– (BRAND NAME OR EQUAL)

SPECS

Brand	Ingersoll-Rand
Voltage	200 volts
Recommended Uses for Product	Drilling, Air brushing, Spraying, Nailing
Power Source	Corded electric.
Noise level	69Db
Included Components	Air compressor.
Item weight	430 pounds
Maximum power	5 horsepower
Capacity	80 gallons
Material	Metal
Product dimensions	37.1x26x68.5 inches
Training on the use of equipment		Required

007 Automotive digital scanner/diagnostic tool– (BRAND NAME OR EQUAL)

SPECS

Manufacturer			LAUNCH
Brand			LAUNCH
Model			X431 PROS V+ 5.0 Elite
Item Weight			17.6 pounds
Product Dimensions		17.32 x 7.09 x 14.57 inches
Item model number		X431 PROS V+ 5.0 Elite
Manufacturer Part Number		X431 PROS V+ 5.0 Elite
Description	With new in-house developed screen; 8.0 MP Pixel Rear Camera; Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology; DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly.
Training on the use of equipment	Required
Software	Latin America Version

008 Manual hydraulic press– (BRAND NAME OR EQUAL)

SPECS

Features and Benefits • Fully welded design for superior durability and strength

• Includes bed plates and bearing shield, ideal for straightening, bending, and removing/installing gears, bearings and bushings

• Overall Height (in.)70.5; Base Width (in.)29.875; Vertical Throat Opening (in.)3.5to44; Throat Width (in.)28; Ram Stroke (in.)6.375; Ram Dia. (in.)2.25; Cylinder Bore (in.)3.15 Capacity 30 tons

009 Portable Heated Parts Washer– (BRAND NAME OR EQUAL)

Item#		75653
Brand		EcoMaster
Manufacture's Warranty		1 year Limited Warranty
Ship Weight		100.0 LB
Flow		210 GPH
Product Type		Water Based
Tank Material		Other
Max. Capacity		12 Gal
Volts		120
Amps		11
GFCI		No
UL Listed		Yes
Sink dimensions	24in.L x 20in.W x 7in.D; Overall dimensions: 28in.L x 28in.W x 41in.H
Training on the use of equipment		Required

010 2 Ton Foldable Engine Crane– (BRAND NAME OR EQUAL)

Brand				Black Hawk
Width			17-5/16 in
Height			7-1/8 in
Weight			274.3 lbs
Max Height			59-1/4 in
Length			52-5/8 in
Type			Engine Crane
Capacity		2 Ton
Description			Folding Engine Crane
Manufacturers Part Number	BH8026

011 1-Ton Folding Engine Stand– (BRAND NAME OR EQUAL)

Holding capacity:	2,000 lbs. (907 kg)
Overall height:	37.5" (953 mm)
Overall length:	41" (1,041 mm)
Rear width:	27.5" (2,210 mm)
Front width:	31" (787 mm)
Shipping weight:	96 lbs. (44 kg)
Shipping dimensions:	37" x 19" x 7" (940 mm x 482 mm x 178
	mm)
Other Specs		• Folds upright to conserve valuable floor space

• Heavy steel construction for maximum durability

• Neck is reinforced to increase strength and eliminate flex

• Long rubber-grip handle eases positioning

• Head swivels 360° to easily position engine

• Slotted adjustable saddle permits quick and easy installation

• Heavy-duty swivel casters

• 4-wheel design provides maximum stability

012 Telescoping Transmission Jack-Trans– (BRAND NAME OR EQUAL)

Lifting Capacity – 1st Stage		2,000 lbs. (907 kg)
Lifting Capacity – 2nd Stage		1,000 lbs. (454 kg)
Lowered Height		37" (940 mm)
Raised Height		73" (1,854 mm)
Base Dimensions		39" x 39" (991 mm x 991 mm)
Shipping Weight		188 lbs. (85 kg)
Shipping Dimensions		23" x 15" x 33" (597 mm x 381
	mm x 838 mm)
Other Specs			• Foot-operated pump

• Two-stage design

• Adjustable saddle tilts two ways

• Saddle slides the other two directions

• Heavy-steel construction for maximum durability

• Double-sealed hydraulics to prevent contamination for longer service life

• Heavy-duty chain anchors keep loads secure

• Steel roller bearings are included underneath the table and on the ends of the adjustment screw to minimize friction and allow for effortless table adjustment even when loaded

• Fully adjustable universal saddle adapts to passenger car and light truck automatic transmissions and transaxle assemblies

• Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch

• Two-stage design provides an extended lifting height of over 73"

• Hardened chrome-moly ram prohibits rust from entering hydraulic system

• Two individual push / pull handles for extra handling capability

• System overload system prevents the jack from being used beyond its rated capacity

• Extra-wide base and four heavy-duty swivel ball bearing casters provides a low center of gravity and exceptional maneuverability

013 Stainless Steel Air Operated Grease Pump– (BRAND NAME OR EQUAL)

Brand				Dynamo
Item				HT-K5002
Compression Ratio		50:1
Operating PSI			70-115 PSI
Air Inlet Size (NPT)		1/4"
Inlet Port	1/4"
Outlet Port			1.18" x 37"
Suction Tube Diameter		1.18 in/30 mm
Suction Tube Length		14 1/2"
Max Fluid PSI			5800
Capacity	28 lbs
Delivery speed		1.76 lbs per minute
Hose		1/4" x 13'
Caster Size	5"
Shipping Weight		34 lbs

014 Electric Wet Steam & Hot Water Pressure Washer– (BRAND NAME OR EQUAL)

Item#	157495
Brand	NorthStar
Manufacturer’s Warranty	24 months parts / 24 months
	labor
Ship Weight	253.0 LB
Pressure	4,000
Volts	115
Amps	15
Fuel Type	Diesel
Dimensions L x W x H (in.)	38 1/4 x 27 x 38 3/4
Training on the use of equipment	Required

015 Stainless Steel Wet/Dry Vacuum, 16 Gallon– (BRAND NAME OR EQUAL)

SPECS

Width			21 in
Depth			22 in
Height			37 in
Water Lift		115.5 in
Cord Length			15'
Hose Diameter		1-1/2 in
Hose Length			13 ft
Cleaning Width		14 in
Type			Wet/Dry Vacuum
CFM			115 CFM
Type of Power				Corded
Hertz			60 Hz
Amperage		10 A
For Use With				HEPA Filter & Paper Filter Bag
Filter Type		HEPA
Wattage		1200 W
Capacity		16 gal
Voltage		120 V
Material		Stainless Steel/Plastic
Manufacturers Part Number		C16V
Decibels		80
Brand			Cat
Training on the use of equipment	Required

016 Pneumatic Brake fluid bleeder Unit, W/2 Adaptors – (BRAND NAME OR EQUAL)

SPECS

Brand		Branick
Item		G300
Other Specs	• OEM Recommended, Especially for AntiLock Brake Systems

• Large 4 Gallon Reservoir Means Less Time Spent Refilling

• Easy One Person Operation on All Brake Systems

• Continually regulated pressure up to 60 PSI

• Quick Couple for Easy Adapter Removal With No Air Introduced

• Simple hand open / close filler port

• High grade ball valves at critical tank locations for quick easy shut-off

• Shipping Size: 14” x 14” x 24” and 25 lbs Training on the use of equipment Required

017 Fluke 179 True-RMS Digital Multimeter– (BRAND NAME OR EQUAL)

Voltage DC		Accuracy1	±(0.09% + 2)
Max. resolution	0.1 mV
Maximum		1000 V
Voltage AC		Accuracy1	±(1.0% + 3)
Max. resolution	0.1 mV
Maximum		1000 V
Current DC		Accuracy1	±(1.0% + 3)
Max. resolution	0.01 mA
Maximum		10 A
Current AC		Accuracy1	±(1.5% + 3)
Max. resolution	0.01 mA
Maximum		10 A
Resistance		Accuracy1	±(0.9% + 1)
Max. resolution	0.1 Ω
Maximum		50 MΩ
Capacitance		Accuracy1	±(1.2% + 2)
Max. resolution	1 nF
Maximum		10,000 µF
Frequency		Accuracy1	±(0.1% + 1)
Max. resolution	0.01 Hz
Maximum		100 kHz
Temperature		Accuracy1	±(1.0% + 10)
Max. resolution	0.1°C
Range			-40°C / 400°C
Size		43 x 90 x 185 mm
Weight		420 g
Warranty	Lifetime
Battery life		Alkaline ~200 hours typical, without
	backlight

018 Battery, starting and charging system analyzer– (BRAND NAME OR EQUAL)

Internal Batteries, Type (qty)			AA (6)
Cable Length, feet (m)			10 (3)
Clamps						Large
CCA Input					Yes
System Voltage				12 or 24
Heavy Duty Battery Pack			Yes, Series/Parallel (1–6)
Ideal Operating Temperature			5–104 °F (-15–40 °C)
USB Drive					Future update or data download
Displays Battery Voltage (SOC)		Yes
Clock Battery					BR1225 Lithium
Overal Width x Height x Depth, inches (cm)	10-1/2 x 6-1/2 x 3 (25.67 x 16.51 x 7.62)
Volts	6/8-12/24 (24 V Truck Packs of 12 V only, no 24 V Aviation Batteries)
Battery Type	Flooded, AGM, Gel, EFB and Northstar Pure Lead AGM
Weight						3 lb 14 oz
V DC Range					1–35
Battery Pack					Yes, Series/Parallel
Integrated Printer				Yes
Printer Capable				Integrated
Displays % of CCA				Yes
Model						Advanced
Reverse Polarity				Yes – Protection and Detection

019 Automotive battery charger Advance Auto Parts; Car, Engine, Batteries, Brakes, Replacement, Performance & Accessories– (BRAND NAME OR EQUAL)

Brand		Schumacher
Other Specs	• 200A engine start, 40A boost, 6A charge, and 2A maintain.

• Digital display, LED indicators, and button controls for ease and accuracy

• Battery and alternator tester provides charge level and helps diagnose electrical problems

• 40A Boost quickly brings deeply discharged batteries back to life

• Microprocessor controlled and automatically adjusts the amperage rate to charge and maintain

• Multi-stage charging for added precision, safety, and battery life

• Float mode monitoring automatically maintains optimum battery charge

• Auto voltage detection of 6V or 12V batteries

• Clamps on front of unit

• Retractable handle

• Compact wheels for easy storage Training on the use of equipment Required

020 Rolling Bridge Jack 7ton capacity – (BRAND NAME OR EQUAL)

Suitable Lift Model(s) HDS-14 Series, HDSO14P, HD-14 Series Min. Drive-Over Height*

Pad Only:	4" (102 mm)
Pad + 2.75" Adapter:	6.75" (171 mm)
Pad + 5.5" Adapter:	9.5" (241 mm)

Max. Lifting Height*

Pad Only:	14.75" (375 mm)
Pad + 2.75" Adapter:	17.5" (445 mm)
Pad + 5.5" Adapter:	20.25" (514 mm)

Reach

Support Base Width:		36.25" (921 mm) - 46.5" (1,181 mm)
Max. Arm Reach:		56" (1,422 mm)
Min. Arm Reach:		42" (1,067 mm)
Time to Full Rise:		55 seconds
Pump:		Air/Hydraulic
Air Pressure:		125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure:	4,550 PSI
Power Requirement:		None
Shipping Weight:		440 lbs. (200 kg)
Shipping Dimensions:		42" x 25" x 15" (1,066 mm x 635 mm
		x 381 mm)
Training on the use of equipment	Required

021 Low-Profile Oil Drain Collector-15-Gallon– (BRAND NAME OR EQUAL)

Brand		Northern Tool
Other Specs	• Low-profile design makes the unit easy to use in many applications.

• Rotary hand pump with 8ft. evacuation hose makes it easy to empty the oil drain

• Expanded metal cover reduces oil splash for less mess

• Mesh grate covers the drain tub, preventing debris and other parts from falling into the oil

• Heavy-duty steel construction with durable powder-coat paint finish

• 0.2 Liters per hand crank revolution for quick draining

• Rolls on two 3in. swivel front casters and two 5in. rear wheels for smooth handling and easy portability

• Includes comfort grip handle for easy portability

• 48in.L x 25in.W x 7 7/8in.H overall size

022 Oil measuring container with flexible extension– (BRAND NAME OR EQUAL)

SKU:	GR25M406
Manufacturer:	Graco
Name		Electronic Manual Oil Meter w/ Flexible Extension
Description:	SDM8 Meter
Size:	1/2 in.
Flow-Rate:	8 GPM
Extension:	Rigid
Fluid:	Oil, ATF
Weight:	5.30 LBS

023 Heavy duty mechanics stretcher Snap-On– (BRAND NAME OR EQUAL)

Brand		Williams
MFR #		42301
Zoro #		G6519250
UPC #		662459423016
Caster Size		2-1/2"
Detail	Features Low-Profile and Drop-Rail Design, 16 Gauge, Hooded Casters, Heavy Duty
Number of Wheels		6
Headrest		Padded
Sub-Category			Williams
Item			Standard Duty Drop Slider Creeper

024 Portable automotive oil collector 18-Gallon self-Evacuating Potable Oil Drain– (BRAND NAME OR EQUAL)

Gallons:			18-gallon
Material:			Steel
Funnel Size:			16″
Wheel Size:			3″ Casters
Height Adjustment:		36-1/2” to 59”
Weight:			42 lbs.
Other Features	Auto-Check Technology for easy and automatic drain evacuation

18-gallon steel tank 16” diameter funnel 4-caster design providing superior stability and mobility Oil and chemical resistant 3” casters for longer life Pressure relief safety valve OSHA friendly labeling 6’ discharge hose

025 Alignment Lifts - Alignment Rack– (BRAND NAME OR EQUAL)

Name				Allignment Four-post lift
Brand				PEAK
Model				414A
Lifting Capacity		6500kg (14,000lbs)
Motor				3.0HP
Gross weight			1544KG
Rolling Jack			Incorporated
Training on the use of equipment	Required

026 Jack stands 12-ton capacity (Pair)– (BRAND NAME OR EQUAL)

Brand				Norco
Model				81012
Low Height			19.625″
High Height			29.375″
Height Intervals		1.25″
Base Size		13″ x 15″
Saddle Size			1.625″ x 4.75″
Shipping Weight		86 lbs.
Other Features	• Unique spring-loaded pawl provides constant locking pressure against lifting column.

• Four-legged base with foot pads for added strength and a more secure footing on asphalt.

• Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.

• Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.

• All stands are intended to be used in pairs.

027 6 Ton Heavy duty Hydraulic long chassis service jack– (BRAND NAME OR EQUAL)

Item#	14447
Brand	Omega
Manufacturer’s Warranty	1-year Limited Warranty
Ship Weight	240.0 LB
Lift Capacity	5 Tons
Max. Lift Height	27 in
Product Type	Service Jack
Min. Lift Height	7 in

028 10 Ton Heavy duty Hydraulic long chassis service jack– (BRAND NAME OR EQUAL)

Lifting Capacity		20,000 lbs. (9,072 kg)
Lowered Pad Height	7" (176 mm)
Raised Height		23" (584 mm)
Front Overall Width		13" (330 mm)
Rear Overall Width		18" (457 mm)
Chassis Length		61" (1,549 mm)
Shipping Weight		380 lbs. (172 kg)
Shipping Dimensions		64" x 20" x 13" (1,626 mm x 508 mm x 330 mm)
Brand				Bendpak
Item				RFJ-10TL
Other Features			• Alloy-plated ram

• Swivel casters for easy mobility

• Designed for heavy use

• Safety-overload system

• Pump handle can be locked in three different towing positions

• Additional foot pedal control provides quick setup and rise

• Heavy steel construction for maximum durability

• Double-sealed hydraulics prevents contamination for longer service life

029 1/2-Inch Square Drive Click Torque Wrench CDI– (BRAND NAME OR EQUAL)

Item			Micrometer Torque Wrench
Head Type	Standard
Includes		(1) Case
Accuracy		+/-4% CW, +/-6% CCW @ 20 to 100% of
	Full Scale
Handle			Metal
Material		Alloy Steel
Handle Type			knurled
Handle Material		Metal
Torque Measurement Type		Foot-Pound, Newton-Meter
Rotation		Clockwise and Counterclockwise
Ratcheting			Yes
Standards		ASME B107.14-2004, ISO 6789
Teeth			30
Meets/Exceeds		ASME B107.14-2004, ISO 6789 Standards
Visual/Audible Indicators		Audible Click
Tether Capable		Tether Capable
Secondary Scale Range		47 N-m to 332 N-m
Primary Scale Range		30 ft-lb to 250 ft-lb
Number of Geared Teeth		30
Min. Number of Cycles		5,000
Sub-Category			CDI Torque Products

030 Break lathe extra truck adapters and accessories– (BRAND NAME OR EQUAL)

Truck Adapter Package (32 pc) / Fits RL-8500 & RL-8500XLT:

• 1 truck arbor

• 1 arbor nut

• 2 spacers

• 3 hubless adapters

• 2 double taper adapters

• 13 centering cones

• 1 spring

Light-Medium Truck Set:

• Fits RL-8500 and RL-8500XLT

• 3-piece kit

• Use with most rotors and drums

• Works on cars and light trucks

• Neoprene rubber banded flange plates

• Increased performance

• Superior micro-surface finish

• Easier and safer to handle

031 Retractable electric extension with light bulb– (BRAND NAME OR EQUAL)

Brand		LUMAPRO
Retractable Cord Ending		Incandescent Lamp with Receptacle
Lamp Watts		75 W
Voltage		120V AC
Retractable Cord Length		50 ft
Wire Size		18 AWG
Max. Amps		7 A
Cord Color		Yellow
Trade Designation		SVT
Retractable Cord Ending Configuration	NEMA 5-15R
Feeder Cord Ending Configuration	NEMA 5-15P
Hand Lamp Mounting		Hook
Reel Color		Yellow
Number of Conductors		3
Feeder Cord Length		2 ft
Feeder Cord Ending		Grounding Plug
Reel Material		Steel
Reel Dia.		9-1/2 in
Reel Width		3 in
Overall Height		11 in
Lamp Guard		Steel
Slip Ring Rating		20A
Number of Outlets		1
Replacement Lamps		2CUX7
Special Features		Circuit Breaker
Standards		UL (E38671)
Includes		Mounting Hardware

032 Heavy duty Jumper Cables + Storage Case– (BRAND NAME OR EQUAL)

Manufacturer				Stark USA
Part Number				21515
Item Weight				13.02 pounds
Product Dimensions		16 x 15 x 6.5 inches
Item model number		21515
Is Discontinued By Manufacturer	No
Color			Red/Black
Material			Mixed
Power Source			Battery Powered
Item Package Quantity			1
Included Components				Jumper Cable, Carrying Case
Batteries Included?			No
Batteries Required?			No

033 Pneumatic impact wrench– (BRAND NAME OR EQUAL)

Color		Red
Brand		Chicago Pneumatic
Material	Metal
Item Weight			4.41 Pounds
Item Package Quantity		1
Head Style	Fixed Square
Finish Type			Clear
Item Torque			959 Foot Pounds
Operation Mode	Pneumatic
Manufacturer			Chicago Pneumatic
Part Number			8941077481
Item Weight			4.41 pounds

Item model number CP7748 Is Discontinued By Manufacturer No

Size	1-Inch Short Anvil
Style	New Version
Finish	Clear
Power Source		Air Powered
Sound Level		94.3 dB
Cutting Diameter	0.5 Inches
Measurement System		Imperial
Usage	Amateur, Professional
Included Components		Impact Wrench
Batteries Included?	No
Batteries Required?	No
Warranty Description	1-year limited warranty
Assembled Diameter	0.5 Inches

034 24 PC 1/2 Drive Metric Impact Socket Set– (BRAND NAME OR EQUAL)

• 14-PC 1/2" Dr 6-Point Deep Metric Impact Socket Set

• Set contains the following sizes:10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm, and 27mm.

• Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength

• Made of high-quality steel (chrome-molybdenum)

• Engineered specifically for use with impact tools, using the most up to date industrial specifications

• Packaged in a molded storage case

• Lifetime Warranty

035 3/8-Inch Square Drive Click Torque Wrench CDI– (BRAND NAME OR EQUAL)

Color		Chrome
Brand		CDI
Material	Alloy Steel
Item Weight	2.5 Pounds
Item		752MFRMH

036 Strut spring compressor – (BRAND NAME OR EQUAL)

Features: • Doesn't require adaptors

• Heavy Duty Acme thread

• Versatile mounting options

• Multi-Position hooks

• All steel construction

• Easy to use Other Specifications: • Max Spring Compression Capacity | 3000 lb(1361 kgs)

• Min/Max Spring Diameters | 3.5/11.5 in (9/29 cm)

• Packaged Dimensional Data | 18.5 x 20 x 43.63 in (47 x 51 x 111 cm)

• Shipping Weight | 100 lbs (43 kgs)

037 52 Pcs heavy duty SAE and metric wrench set– (BRAND NAME OR EQUAL)

The Craftsman combination wrench set includes each and every inch size offered and every metric size wrench available in a raised panel combination wrench. Manufactured from alloy steel, these wrenches are strong enough for any job:

• 32 Standard Combination Wrenches

• 20 Midget Wrenches

• Alloy Steel Construction

038 47 Pcs Heavy duty SAE and metric socket set, 1/2 drive– (BRAND NAME OR EQUAL)

Item#	97590
Brand	Milwaukee
Manufacturer’s Warranty	Lifetime Limited warranty
Ship Weight	15.88 LB
Measurement Standard	Standard (SAE)/Metric
Pieces (qty.)	47
Socket Set Type	1/2in. Drive Sets
Drive Size	1/2 in
Material	Alloy Steel
Case Included	Yes
Product Weight	15.88 lb
Dimensions L x W x H (in.)	15.63 x 2.25 x 13.5 in

039 47 Steel Pliers set– (BRAND NAME OR EQUAL)

Number of Piece	5
Material	High Carbon steel
Overall Length	9-1/2", 9-1/2", 7-3/4", 8", 6-1/2"
Color	Blue (Handle)
Features	Undercut Tongue & Groove Design Won't Slip,

Permalock Fastener Eliminates Nut and Bolt Failure, Patented Reinforcing Edge Minimizes Stress Breakage, Right Angle, Laser Heat-Treated Teeth Grip Better and Last Longer, 10-22 AWG Wire, Crimps Insulated and Non-Insulated Terminals, Crosshatch Pattern on Jaws Grips Work Tightly.

040 6-Piece Cushion Grip Screwdriver Kit– (BRAND NAME OR EQUAL)

Manufacturer			Milwaukee
Part Number			MWKMT200-6
Item Weight			1.7 pounds
Package Dimensions		13.74 x 7.83 x 1.3 inches
Item model number		MT200-6
Size		Large
Color		Red
Style		Hammerdrill
Item Package Quantity	1
Head Style	Flat, Phillips
Usage		Professional
Batteries Included?		No
Batteries Required?		No

041 Adjustable Oil Filter Wrench with Handle– (BRAND NAME OR EQUAL)

Brand	PROTO
Oil Filter Wrench Type	Oil Filter Wrench with Handle
For Outside Diameter	4-1/8 in to 4-1/2 in
Handle Length	4 in
Strap Width	1 in
Strap Length	4-1/2 in
Strap Material	Stainless Steel
Pipe Capacity	4-1/2 in
Handle Color	Red
Material	Stainless Steel
Finish	Natural
Handle Material	Plastic
Adjustable	Manual
Filter Capacity	4-1/8 in to 4-1/2 in
Insulated	No
Non-Magnetic	No
Nonsparking	No
Overall Length	9-1/2 in
Tether Style	Tether Capable
Corrosion Resistant	Yes
Color	Black

042 CDI Torque Wrench, 1/2 in., Dr 30 to 250 ft.-lb– (BRAND NAME OR EQUAL)

Drive Size		1/2 in
Overall Length			24 1/2 in
Overall Width			1 11/16 in
Item			Micrometer Torque Wrench
Head Type			Standard
Includes		(1) Case
Accuracy		+/-4% CW, +/-6% CCW @ 20 to 100% of Full Scale
Handle			Metal
Material		Alloy Steel
Handle Type			knurled
Handle Material		Metal
Torque Measurement Type		Foot-Pound, Newton-Meter
Rotation		Clockwise and Counterclockwise
Ratcheting		Yes
Standards		ASME B107.14-2004, ISO 6789
Teeth			30
Meets/Exceeds		ASME B107.14-2004, ISO 6789 Standards
Visual/Audible Indicators	Audible Click
Tether Capable		Tether Capable
Secondary Scale Range	47 N-m to 332 N-m
Primary Scale Range		30 ft-lb to 250 ft-lb
Number of Geared Teeth		30
Min. Number of Cycles		5,000
Sub-Category			CDI Torque Products

043 Injector cleaning machine – (BRAND NAME OR EQUAL)

Brand					Carbon Zapp
Model					CTU-1100E
Cleaning technology			Diesel Special Ultrasonic Canon
Cleaning capacity			All market injectors
Injector Coverage	Systems CRI, CRIN, PIEZO, MDI, EUI, UI, EUP, HEUI
Work Pressure				0-1000 Bar
Electric outlet				120VAC
Dimensions				200mmx210x250mm
Weight					45kgs
Training on the use of equipment		Required

044 Injector pressure testing machine– (BRAND NAME OR EQUAL)

Diesel Injector Tester – DET 600_SZ 600 BAR Hand pump, mechanical injector calibrator.

It allows quick and easy testing of petrol and diesel engine injectors. It allows you to verify the following:

· nozzle opening pressure (aNOP)

· Spray Pattern

· Watertightness / leaks

· hum Maximum pressure 600 bar, German origin.

045 10 Ton Spander– (BRAND NAME OR EQUAL)

Item#	15616
Brand	Porto-Power
Manufacturer’s Warranty	12 months parts / 12 months labor
Ship Weight	82.0 LB
Product Type	Ram System
Capacity	10 Tons
Operating Pressure	8,300 psi
Max. Extended Height	18 in
Min. Collapsed Height	12 in
Case Included	Yes

046 Autogenous Welding Equipment Porta Kit– (BRAND NAME OR EQUAL)

Name		Cutting and welding equipment.
Model		Porta Kit
Description	Portable equipment for cutting and welding with oxygen and acetylene.
Code	ESC 4081
Cutting Capacity	4”
Welding Capacity	3/8”
Components	1) Oxygen cylinder 1.50 m3, (1) Acetylene accumulator capacity 1.00 Kg, (1) Oxygen regulator model 1710-C CGA540 connection, (1) Acetylene regulator model 1720 CGA510 connection, (1) Handle model SW-2H, (1) cutting attachment SC209-3, (1) Cutting nozzle model SC12-2, (1) Welding nozzle model SW-203, (1) Casserole lighter, (1) Check valve set, (1) Cylinder carriage,, (1) Hose set with connections (5.00mts).

047 1/2 Inch Hub Set 10-32mm – (BRAND NAME OR EQUAL)

· Includes 1 ratchet handle 2 4-1/2 in & 9 in extensions 2 hub hubs: 16mm & 21mm 1 3-way adapter 1 universal set

· 18 cubes: 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 20 mm 21 mm 22 mm 23 mm 24 mm 27 mm 30 mm and 32 mm

· Complies with din 3122, din 3123 and din 3124 standards

048 Capri Tools 3/8-Inch Drive Impact Socket Set with Adapters and Extensions, Premium Chrome-Moly Steel, 48-Piece– (BRAND NAME OR EQUAL)

Manufacturer				Capri Tools
Part Number				CP53000
Item Weight				10.6 pounds
Product Dimensions			15 x 10.83 x 3.5 inches
Item model number			CP53000
Is Discontinued By Manufacturer	No
Size					Master Set w Case / 5/16-3/4 in. 8-19 mm
Finish					Coated,Corrosion Resistance,Manganese Phosphate
Material				Chrome Molybdenum Steel
Number Of Pieces			48
Compatible Fastener Range		0.375 inches
Included Components			Master Impact Socket Set
Batteries Included?			No
Batteries Required?			No
Warranty Description			Lifetime Warranty

049 Combination wrench set with case, 27 pieces (6-32 mm) – (BRAND NAME OR EQUAL)

Includes: Keys: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 mm (27 sizes) Key case

Angled Open End	To reduce the arc of turning for work in tight spaces, the open end is angled at 15 degrees so that the wrench can be flipped with each rotation to engage the fastener twice as often.
12-point box end	A 12-point box end doubles the available access angles, compared to a 6-point end. To prevent fasteners from rounding, the end of the box is designed to make contact and apply force to the sides of a fastener's head and not to the corners.
Offset Frame End	The end of the box is offset 15 degrees, creating room for fingers and making it easier to reach obstructions.
Storage Features	Ideal for on-the-go. Take combination keys anywhere with the compact roll-up pouch that keeps the keys tightly packed and can't slip. The handle wraps around the bag to fully support the weight of the set.
Durable material	600 x 600 denier polyester with polyurethane backing is abrasion and tear resistant and has a durable water-repellent (DWR) coating.
Easy-to-access design	The design of the bag minimizes the bulk of extra material so that keys can be quickly accessed without fabric flaps in the way. A second row of pockets provides the most compact fit for keys.

050 Magnetic Screwdriver Set (146 pieces) – (BRAND NAME OR EQUAL)

Brand				Amartisan
Number of items		146
Head Style			Hexagonal
Material			Chromium vanadium steel
Special Features		Ergonomic
Item Dimensions LxWxH	13.2 x 6.22 x 11.1 inches
Maker				AMARTISAN
Part Number			AM9851
Product Dimensions		13.2 x 6.22 x 11.1 inches
Product Model Number	AM9851
Boss				146-piece screwdriver set
Included Components		Screwdriver

051 Polishing Hammer Curved Nail 16 Oz – (BRAND NAME OR EQUAL)

Nail:		Curved
Head:		16 oz
Mouth:	1 1/8" (28.5mm)Handle: 13" (330mm)
Packaging:	Bulk
Uses		Woodworking, Home, etc.

Forged head in high carbon steel Fully polished Fiberglass handle with double injection reduces vibrations from the blow

052 Rubber Mallet 16 Oz Pretul– (BRAND NAME OR EQUAL)

Head:		16 oz
Nozzle:	2 3/16" (55.5mm)Handle: 11 3/4" (298.4mm)
Packaging:	Bulk
Uses		For furniture assembly, car bumper straightening, etc.

Head made of neoprene Wooden handle Delivers powerful impacts without damaging surfaces

053 Hammer Set – (BRAND NAME OR EQUAL)

Head Material				Brass
Handle Material			Thermoplastic elastomers
Item Weight				3810 grams
Grip Type				Antiskid
Style					5-Piece Set (Fiberglass Handle)
Maker					WEDO
Part Number				BRHASETA
Package Dimensions			16.61 x 10.87 x 6.1 inches
Material				Metal
Power Source				Hand-fed
Number of Item Bundles		1
Measuring system			Metric
Included Components	3lb Sled Hammer,1-1/2lb Drum Type Hammer,1lb Ball Hammer,2lb Ball Hammer,0.7lb Scale Hammer
Are batteries included?		No
Are batteries needed?			No

054 Wrench Set – (BRAND NAME OR EQUAL)

· Adjustable wrenches: 6 inches (150 mm), 8 inches (200 mm), 10 inches (250 mm)

· Adjustable Wide Jaw Wrench with Comfortable Grip - 8 inch / (200 mm)

· Graduated scale for easy measurement.

· In many activities and situations, it is extremely important to be able to quickly check that all tools have been put back into the correct positions in the toolbox at the end of the shift or when the job has been completed. The Teng Tools storage system made of EVA foam offers a cost-effective solution.

· Each tool has been scanned into a CAD CAM system and a computer-controlled milling machine cuts the exact shape of each tool into a three-color EVA foam block.

· The top layer of the foam is black, the middle layer is white, and the bottom layer is red, so that as soon as the tool is removed, its position is clearly visible in red.

· The size and/or a description of the tool are engraved next to its position. This means that if a tool is missing, not only is its position clearly visible, but you can also quickly determine which tool is involved. This makes it much easier to remember where you last used the tool and helps when you need to replace a lost tool.

055 Pliers Set – (BRAND NAME OR EQUAL)

Product description Set of 3 manual tools, Ergonomic bi-material handle, Made of chrome-vanadium steel, Set includes: diagonal cutting pliers 6 inches, long nose 6 inches, electrician's pliers 1.5 inches

056 20-Piece Pliers Kit with Organizer Shelves – (BRAND NAME OR EQUAL)

Brand					WORKPRO
Material				50Cr-V, Carbon Steel, TPR
Product Dimensions			17.49"L. x 12.78"W. Inch
Handle Material			TPR
Specific Uses of the Product	Gripping, Holding, Closing, Locking Pliers, Twisting, Wire Stripping
Grip Type				Ergonomic
Part Number				W001369AE
Included Components	Long-nose pliers (6 and 8 inches); Linesman pliers (8 inches); screw removal pliers (8 inches), wire strippers (8 inches); slip-joint pliers (6 and 8 inches); snap-on ring pliers (7 inches x 4 pieces); diagonal pliers (6 and 7 inches); Straight jaw locking pliers (6.5 inches). Curved jaw lock liers (7 and 10 inches); pliers for groove joints (8 inches, 10 inches, and 12 inches); adjustable oil filter wrench (12 inches); Pliers Organizer Rack, 10 Slots (2 Packs)
Are batteries needed?		No

057 Angle Grinder Tool – (BRAND NAME OR EQUAL)

Maker						DEWALT
Part Number					DWE43116
Product Dimensions				18 x 6 x 5 inches
Product Model Number			DWE43116
Discontinued by the manufacturer		No
Size						One size fits all
Style						Angle Grinder Tool Only
Material					Combination
Power Source					Wired power supply
Voltage					120 Volts
Wattage					1700 watts
Power						2.30
Number of Item Bundles			1
Measuring system				Metric
Use						milling
Included Components	1) Grinder, 1) Side handle, inner and outer flange, 1) 27.4 inch type 5 guard, 1) 27 inch type 5 guard, 1) 27 inch type 6 guard
Are batteries included?			No
Are batteries needed?			No

058 STANLEY 1/2″ Extension and Cups Handling Kit – (BRAND NAME OR EQUAL)

STANLEY 23PC 1/2" DR 12PT SOCKET MODULE SET + CASE STMT74301-8 STMT74726-8C

1/2" Pear head ratchet NP9 1/2" L-handle 90 degree 1/2" Extension 125, 250mm 1/2" Universal joint 1/2" 12PTS Standard socket 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 ,18, 19, 21, 22, 24, 27, 30, 32mm

059 Socket wrench set – (BRAND NAME OR EQUAL)

Maker						BGS Do it yourself
Manufacturer's Product Identifier		15113
Product Dimensions				50 x 20 x 5 cm; 13.26 kg
Size						3/4 inch
Style						20 pieces \| Inlet 20 mm (3/4") \| 19 - 50 mm
Finishing					Chromium.
Material					Chromium vanadium steel
Number of products				1
Number of Pieces				20
Measuring system				Metric
Range of Supported Sizes			0.75 inches
Included Components	BGS DIY 15113 \| Socket Set \| Inlet 20 mm (3/4") \| 19 - 50 mm \| 20 pieces.
Includes batteries				No
Needs batteries				No
Product Weight				13.3 kg

060 Screw Clamp – (BRAND NAME OR EQUAL)

Material			Cast iron
Brand				Stanley
Item Dimensions LxWxH	1.18 x 5.51 x 36.61 inches
Style				Clamp
Item Weight			2.07 Kilograms
Tensile Strength		450 kg
Part Number			FMHT0-83247
Size				800mm
Power Source			AC
Number of Item Bundles	1
Number of Pieces		1
Included Components		FatMax® Clutch Lock F Clamp 31.496 in
Are batteries included?	No
Are batteries needed?	No

061 Electric Air Compressor – (BRAND NAME OR EQUAL)

Brand						Makita
Voltage					120 Volts
Recommended Product Uses			Grinding, Spraying, Cutting
Power Supply					Battery operated
Noise level					60 dB
Special Features				Light
Included Components				Universal 1/4" Quick Coupler, Male (447013-E)
Item Weight					20.5 kg
Maximum power				1 Horsepower
Capacity					2 Gallons
Product Dimensions				12"L. x 12"W. x 12" H. inches
Style						Portable
Airflow Capacity				1.6 Cubic Feet Per Minute Per Watt
Engine Horsepower				1 Horsepower
Model Name	Makita MAC210Q Quiet Series, 1 HP, 2 Gallon, Oil-Free, Electric Air Compressor
Maker						Makita
Part Number					MAC210Q
Product Model Number			MAC210Q
Discontinued by the manufacturer		No
Thickness					11 Inches
Power						1
Number of Item Bundles			1
Maximum Pressure				135 Pounds Per Square Inch
Are batteries included?			No
Are batteries needed?			No
Training on the use of equipment		Required

062 Angle Grinder 7" – (BRAND NAME OR EQUAL)

Disc Diameter		180 mm (7'')
Width			20 cm
Packaging weight	6,4 kg
Length			51,1 cm
Height			14 cm
Model			GA7040S
Type			Angle grinder
Potency		220V: 2600W / 110V: 2400W
Power			Eléctrica
Velocity		8500 rpm
Material		metallic / plastic
Characteristics		Superior anti-powder structure
Connection cable	2,5 m (8,2 ft)
Warranty		1 year
Content		1 angle grinder
Use			for cutting and grinding.

063 Polisher and Sander – (BRAND NAME OR EQUAL)

Feeding		Electric
Packaging Dimension (cm)	12 x 56 x 23
Brand			Dewalt
Model			DWP849X
Electrical Power (W)		1250

064 Hammer Drill 1/2 Inch – (BRAND NAME OR EQUAL)

Product information 1,100 wattss (9 amps) motor, Reversible variable speed 0-2800 rpm Strokes per minute: 0-44,800 Frequency: 50/60 hz Voltage:110-120v With additional handle

Safety warning	To use this product, follow the manufacturer's safety recommendations included on the label or user manual
Warranty		12 months

065 Pneumatic Tool Case. 71 Pieces – (BRAND NAME OR EQUAL)

Name		Rockforce Premium Professional Pneumatic Tool Set
Description	Complete pneumatic tool kit with impact wrench, ratchet wrench, straight grinder, chiseling hammer, blow gun and multiple accessories manufactured for professional use, with composite + rubberized finishes for optimal grip.

Pneumatic Tool Kit: All tools organized in a single case.

Quality tool for intensive use.

Accessories available and organized for each tool.

Assortment of BSP connectors and quick adapters to connect to the compressor.

Low flow rate (max. 150 l/min). Compatible with the vast majority of compressors.

#…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 8, 2024.