SOW Table Mountain.pdf
PDF 145 KB Posted
- Attached to
- Fence, Remove and Install
- Solicitation number
- 1331L526BarbFence
About this file
This is a Statement of Work (SOW) for fence replacement services at the Table Mountain Field Site operated by the Institute for Telecommunication Sciences (ITS), a component of the National Telecommunications and Information Administration (NTIA) under the U.S. Department of Commerce.
The contractor shall replace 1700 acres of barbed wire fence with 7-foot plus 1-foot chain link fence on the property line of Table Mountain in Longmont, Colorado. All work must comply with CDOT regulation m-607-2 for chain link fence and gates. Services include removing existing barbed wire fence; installing chain link fence with 2-inch mesh No. 9 gauge galvanized material; installing fence posts to specified depths (38 inches for line posts, 44 inches for terminal posts) with 12-inch diameter concrete footers; replacing the West gate with a 16-foot cantilever gate and the North gate with a 28-foot cantilever gate; installing two 4-foot walk-through gates; and placing 12-inch by 15-inch government-provided "No Trespassing" signs at intervals not exceeding 40 feet along the fence line and at property corners. Mobilization and site preparation include clearing and grubbing vegetation and debris, cutting trees and existing fence posts at ground level, correcting ground undulations, and removing all debris from the site. Fence installation specifications require 2 7/8-inch diameter terminal posts, 2 3/8-inch diameter line posts spaced 120 inches apart, 1 5/8-inch diameter top rail, 1 5/8-inch diameter middle brace and truss, and three strands of barbed wire on extended terminal posts placed at 45 degrees. Warning signs must be conspicuously placed so at least one is recognizable at night from 100 feet away. Performance is located at NTIA - Table Mountain Field Site, 8600 N 39th Street, Longmont, CO 80503, with North gate access via 51st and Nelson Road. The period of performance begins upon award and continues until completion of work based on approved milestones, with the point of contact to be provided at time of award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 3.pdf | ||
| Bid_Schedule_-.pdf | ||
| Wage Determination 2015-5415.txt | TXT text file | |
| RFQ Questions and Answers.pdf | ||
| Amendment 2 .pdf | ||
| Field Notes CO0061903810_All.pdf | ||
| Amendment 1.pdf | ||
| Plat Map CO060020N0700W00004.pdf | ||
| RFQ Barbed Wire Fence.pdf | ||
| Attachment 2-607-2-chain-link-fence_ada.pdf | ||
| DBA C020260002.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
Table Mountain Fence Replacement
U.S. Department of Commerce
National Telecommunications and Information Administration Institute for Telecommunication Sciences
1. BACKGROUND
The Institute for Telecommunication Sciences (ITS) provides research and development support for the National Telecommunications and Information Administration (NTIA) by performing basic research in radio science that provides the technical foundation for NTIA's policy development and spectrum management activities, as well as solving telecommunications challenges for other Federal agencies, state and local Governments, private corporations and associations, and international organizations. Additionally, ITS addresses emerging telecommunications, information technology, and security challenges and contributes to the creation of telecommunications standards that support the full and fair competitiveness of the U.S. communications and information technology business sectors.
2. OBJECTIVE
ITS, as custodians of the Table Mountain Field Site and Radio Quiet Zone, requires that 1700 acers of barbed wire fence be replaced with chain link on Table Mountain.
3. REQUIREMENTS
ITS requires that 1700 acers of barbed wire fence be replaced with 7-foot + I-foot chain link fence. The fence is located on the property line of Table Mountain. All operations and products must adhere to the CDOT regulation m-607-2 Chain Link Fence and gates, attached hereto at Attachment A.
Contractor shall provide the following:
3.1. Services and Deliverable
• Remove barbed wire fence
• Replace with 7 foot + 1 foot chain link fence.
• Fence posts are to be inserted to a depth of 38-inches line post and 44-inches terminal post, 12-inch DIA in a concrete footer. Fence posts installed are to be a minimum of 84-inches high and covered with chain link 2-inch mesh No. 9 gage galvanized on fence posts. 12-inch 3-wire barbed wire on top offence.
• Replace the West gate 16-foot cantilever gate.
• Replace North gate 28-foot cantilever gate.
• Install 2 4-foot walk through gates.
• Installation of 12-inch W x 15-inch H No Trespassing Government signs along the fence. To be provided by NTIA/ITS
3.2. Mobilization and site preparation
• Clearing and grubbing of vegetation, debris and existing deteriorated fencing along the alignment of the proposed fence will commence following establishment and staking of the new fence line.
• The existing fence will be left in place where it does not interfere with the installation of the new fence.
• Where required, trees and existing fence posts along the Site boundary will be cut off at ground level. Ground undulations along the fence line will be corrected to obtain a uniform gradient between fence posts.
• Debris, if any, and old fencing removed from the fence alignment will be removed from site by the contractor.
3.3. Fence Installation
• Upon completion of clearing and grubbing operations, line posts, corner posts and gate posts will be installed with the following specifications.
• 2 7/8" diameter terminal post with 12" post footing diameter and 44" post footing depth.
• 2 3/8" diameter line post 12" post footing diameter and 38" post footing depth. Line post spacing 120".
• Top offence 1 5/8" diameter top rail.
• Fence braced with 1 5/8" diameter middle brace and truss.
• 3 strands ofbarbed wires with extended terminal post placed at 45 degrees to keep outsider out.
3.4. Government Signage
• Warning signs must be conspicuously placed along the fence and on each gate at intervals so that at least one sign is recognizable at night from a distance of 30m (100 ft.) from any way that could reasonably be used to approach the enclosure.
• Government provided NO TRESPASSING signs will be placed not more than 40 feet apart along the fence line, at each corner of the property line, and on gates.
4. PLACE OF PERFORMANCE
The fence replacement shall be completed at the following Government location:
NTIA - Table Mountain Field Site 8600 N 39th Street Longmont, CO 80503
Address is for the facility West gate. North gate access is also available via 51st and Nelson Road.
5. Point of Contact – Provided at time of award.
6. PERIOD OF PERFORMANCE
Service starts at the time of the award and expires at the completion of the work based on approved milestones.
| 1. BACKGROUND |
| 2. OBJECTIVE |
| 3. REQUIREMENTS |
| 3.1. Services and Deliverable |
| 3.2. Mobilization and site preparation |
| 3.3. Fence Installation |
| 3.4. Government Signage |
| 4. PLACE OF PERFORMANCE |
| 6. PERIOD OF PERFORMANCE |
File details come from the government source that posted it. Updated .