SOW_S60_TURBO_RECONDITIONING - DZ114.pdf

S CREATED BY: REV.

SOW

RECONDITION MTU S60 TURBO ASSEMBLY

Item Name: TURBO ASSY. UTW8801 (MTU/Detroit Diesel)

NSN: 2950-01-590-4198

Part Number: 23529000

Used On: 45’ RB-M, (MTU-S60) Main Propulsion Diesel Engine

1. SCOPE

This Repair Description outlines the Open/Inspect, Report, Repair, Preservation, Packing, and shipping of twenty-five (25) Turbo Assemblies that are used on the MTU S60 Diesel engine. All reconditioned Turbo Assemblies will be returned to the USCG Surface Forces Logistics Center warehouse for storage and distribution (as needed) by the

Small Boat Product Line (SBPL).

2. REQUIREMENTS

2.1. OPEN & INSPECT

Each Turbo Assembly shall be opened (disassembled) and inspected in accordance with (IAW) the Original

Equipment Manufacturer (OEM) instructions. Upon inspection completion, the vendor shall provide an Inspection

Report to the Contracting Officer Representative (COR) for review. Once the COR has received approval to proceed by the Contracting Officer (KO), the vendor shall proceed with Turbo reconditioning.

**NOTE** Any Turbo that is found to be Beyond Economical Repair (BER) shall be reported to the COR for disposition guidance. {BER: If the cost of reconditioning exceeds 65% of the cost for a new Turbo.}

2.2. OVERHAUL / REASSEMBLY

Each Turbo Assembly shall be reconditioned/repaired, and reassembled IAW Detroit Diesel and MTU Marine

Service (OEM) specifications and standards.

2.3. PRESERVATION

Each Turbo Assembly shall be preserved in accordance with manufacturer instructions; individually preserved and wrapped to accommodate a potential two (2) year period of warehouse storage.

2.4. PACKING AND MARKING FOR SHIPPING

Each Turbo Assembly shall be packaged in its individual crate. Each crate shall be capable of providing adequate protection of the item during multiple shipments.

**NOTE** If a new crate is required, due to excessive damage or crate missing completely, the vendor shall provide a crate that is capable of providing adequate protection of the item during multiple shipments. Additional funding for a new crate(s) must be approved by the KO prior to crate acquisition by the vendor.

Mark each crate in legible black print lettering, or labeling, with the following information:

S CREATED BY: REV.

SOW

RECONDITION MTU S60 TURBO ASSEMBLY

NATIONAL STOCK NUMBER : 2950-01-590-4198

ITEM NAME: : TURBO ASSY. UTW8801

PART NUMBER : 23529000

SERIAL NUMBER : (Vendor Provided, if Applicable)

GOVERNMENT ORDER NUMBER : (Per Delivery Order Number)

“US Coast Guard Surface Forces Logistic Center” Condition “A”